Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IBurnMintERC20} from "../ERC20/IBurnMintERC20.sol";
import {IERC677} from "./IERC677.sol";

import {ERC677} from "./ERC677.sol";
import {OwnerIsCreator} from "../../access/OwnerIsCreator.sol";

import {ERC20Burnable} from "../../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/extensions/ERC20Burnable.sol";
import {EnumerableSet} from "../../../vendor/openzeppelin-solidity/v4.8.3/contracts/utils/structs/EnumerableSet.sol";
import {IERC165} from "../../../vendor/openzeppelin-solidity/v4.8.3/contracts/utils/introspection/IERC165.sol";
import {IERC20} from "../../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/IERC20.sol";

/// @notice A basic ERC677 compatible token contract with burn and minting roles.
/// @dev The total supply can be limited during deployment.
contract BurnMintERC677 is IBurnMintERC20, ERC677, IERC165, ERC20Burnable, OwnerIsCreator {
  using EnumerableSet for EnumerableSet.AddressSet;

  error SenderNotMinter(address sender);
  error SenderNotBurner(address sender);
  error MaxSupplyExceeded(uint256 supplyAfterMint);

  event MintAccessGranted(address indexed minter);
  event BurnAccessGranted(address indexed burner);
  event MintAccessRevoked(address indexed minter);
  event BurnAccessRevoked(address indexed burner);

  // @dev the allowed minter addresses
  EnumerableSet.AddressSet internal s_minters;
  // @dev the allowed burner addresses
  EnumerableSet.AddressSet internal s_burners;

  /// @dev The number of decimals for the token
  uint8 internal immutable i_decimals;

  /// @dev The maximum supply of the token, 0 if unlimited
  uint256 internal immutable i_maxSupply;

  constructor(string memory name, string memory symbol, uint8 decimals_, uint256 maxSupply_) ERC677(name, symbol) {
    i_decimals = decimals_;
    i_maxSupply = maxSupply_;
  }

  function supportsInterface(bytes4 interfaceId) public pure virtual override returns (bool) {
    return
      interfaceId == type(IERC20).interfaceId ||
      interfaceId == type(IERC677).interfaceId ||
      interfaceId == type(IBurnMintERC20).interfaceId ||
      interfaceId == type(IERC165).interfaceId;
  }

  // ================================================================
  // |                            ERC20                             |
  // ================================================================

  /// @dev Returns the number of decimals used in its user representation.
  function decimals() public view virtual override returns (uint8) {
    return i_decimals;
  }

  /// @dev Returns the max supply of the token, 0 if unlimited.
  function maxSupply() public view virtual returns (uint256) {
    return i_maxSupply;
  }

  /// @dev Uses OZ ERC20 _transfer to disallow sending to address(0).
  /// @dev Disallows sending to address(this)
  function _transfer(address from, address to, uint256 amount) internal virtual override validAddress(to) {
    super._transfer(from, to, amount);
  }

  /// @dev Uses OZ ERC20 _approve to disallow approving for address(0).
  /// @dev Disallows approving for address(this)
  function _approve(address owner, address spender, uint256 amount) internal virtual override validAddress(spender) {
    super._approve(owner, spender, amount);
  }

  /// @dev Exists to be backwards compatible with the older naming convention.
  function decreaseApproval(address spender, uint256 subtractedValue) external returns (bool success) {
    return decreaseAllowance(spender, subtractedValue);
  }

  /// @dev Exists to be backwards compatible with the older naming convention.
  function increaseApproval(address spender, uint256 addedValue) external {
    increaseAllowance(spender, addedValue);
  }

  /// @notice Check if recipient is valid (not this contract address).
  /// @param recipient the account we transfer/approve to.
  /// @dev Reverts with an empty revert to be compatible with the existing link token when
  /// the recipient is this contract address.
  modifier validAddress(address recipient) virtual {
    // solhint-disable-next-line reason-string, gas-custom-errors
    if (recipient == address(this)) revert();
    _;
  }

  // ================================================================
  // |                      Burning & minting                       |
  // ================================================================

  /// @inheritdoc ERC20Burnable
  /// @dev Uses OZ ERC20 _burn to disallow burning from address(0).
  /// @dev Decreases the total supply.
  function burn(uint256 amount) public override(IBurnMintERC20, ERC20Burnable) onlyBurner {
    super.burn(amount);
  }

  /// @inheritdoc IBurnMintERC20
  /// @dev Alias for BurnFrom for compatibility with the older naming convention.
  /// @dev Uses burnFrom for all validation & logic.
  function burn(address account, uint256 amount) public virtual override {
    burnFrom(account, amount);
  }

  /// @inheritdoc ERC20Burnable
  /// @dev Uses OZ ERC20 _burn to disallow burning from address(0).
  /// @dev Decreases the total supply.
  function burnFrom(address account, uint256 amount) public override(IBurnMintERC20, ERC20Burnable) onlyBurner {
    super.burnFrom(account, amount);
  }

  /// @inheritdoc IBurnMintERC20
  /// @dev Uses OZ ERC20 _mint to disallow minting to address(0).
  /// @dev Disallows minting to address(this)
  /// @dev Increases the total supply.
  function mint(address account, uint256 amount) external override onlyMinter validAddress(account) {
    if (i_maxSupply != 0 && totalSupply() + amount > i_maxSupply) revert MaxSupplyExceeded(totalSupply() + amount);

    _mint(account, amount);
  }

  // ================================================================
  // |                            Roles                             |
  // ================================================================

  /// @notice grants both mint and burn roles to `burnAndMinter`.
  /// @dev calls public functions so this function does not require
  /// access controls. This is handled in the inner functions.
  function grantMintAndBurnRoles(address burnAndMinter) external {
    grantMintRole(burnAndMinter);
    grantBurnRole(burnAndMinter);
  }

  /// @notice Grants mint role to the given address.
  /// @dev only the owner can call this function.
  function grantMintRole(address minter) public onlyOwner {
    if (s_minters.add(minter)) {
      emit MintAccessGranted(minter);
    }
  }

  /// @notice Grants burn role to the given address.
  /// @dev only the owner can call this function.
  function grantBurnRole(address burner) public onlyOwner {
    if (s_burners.add(burner)) {
      emit BurnAccessGranted(burner);
    }
  }

  /// @notice Revokes mint role for the given address.
  /// @dev only the owner can call this function.
  function revokeMintRole(address minter) public onlyOwner {
    if (s_minters.remove(minter)) {
      emit MintAccessRevoked(minter);
    }
  }

  /// @notice Revokes burn role from the given address.
  /// @dev only the owner can call this function
  function revokeBurnRole(address burner) public onlyOwner {
    if (s_burners.remove(burner)) {
      emit BurnAccessRevoked(burner);
    }
  }

  /// @notice Returns all permissioned minters
  function getMinters() public view returns (address[] memory) {
    return s_minters.values();
  }

  /// @notice Returns all permissioned burners
  function getBurners() public view returns (address[] memory) {
    return s_burners.values();
  }

  // ================================================================
  // |                            Access                            |
  // ================================================================

  /// @notice Checks whether a given address is a minter for this token.
  /// @return true if the address is allowed to mint.
  function isMinter(address minter) public view returns (bool) {
    return s_minters.contains(minter);
  }

  /// @notice Checks whether a given address is a burner for this token.
  /// @return true if the address is allowed to burn.
  function isBurner(address burner) public view returns (bool) {
    return s_burners.contains(burner);
  }

  /// @notice Checks whether the msg.sender is a permissioned minter for this token
  /// @dev Reverts with a SenderNotMinter if the check fails
  modifier onlyMinter() {
    if (!isMinter(msg.sender)) revert SenderNotMinter(msg.sender);
    _;
  }

  /// @notice Checks whether the msg.sender is a permissioned burner for this token
  /// @dev Reverts with a SenderNotBurner if the check fails
  modifier onlyBurner() {
    if (!isBurner(msg.sender)) revert SenderNotBurner(msg.sender);
    _;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {ConfirmedOwnerWithProposal} from "./ConfirmedOwnerWithProposal.sol";

/// @title The ConfirmedOwner contract
/// @notice A contract with helpers for basic contract ownership.
contract ConfirmedOwner is ConfirmedOwnerWithProposal {
  constructor(address newOwner) ConfirmedOwnerWithProposal(newOwner, address(0)) {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IOwnable} from "../interfaces/IOwnable.sol";

/// @title The ConfirmedOwner contract
/// @notice A contract with helpers for basic contract ownership.
contract ConfirmedOwnerWithProposal is IOwnable {
  address private s_owner;
  address private s_pendingOwner;

  event OwnershipTransferRequested(address indexed from, address indexed to);
  event OwnershipTransferred(address indexed from, address indexed to);

  constructor(address newOwner, address pendingOwner) {
    // solhint-disable-next-line gas-custom-errors
    require(newOwner != address(0), "Cannot set owner to zero");

    s_owner = newOwner;
    if (pendingOwner != address(0)) {
      _transferOwnership(pendingOwner);
    }
  }

  /// @notice Allows an owner to begin transferring ownership to a new address.
  function transferOwnership(address to) public override onlyOwner {
    _transferOwnership(to);
  }

  /// @notice Allows an ownership transfer to be completed by the recipient.
  function acceptOwnership() external override {
    // solhint-disable-next-line gas-custom-errors
    require(msg.sender == s_pendingOwner, "Must be proposed owner");

    address oldOwner = s_owner;
    s_owner = msg.sender;
    s_pendingOwner = address(0);

    emit OwnershipTransferred(oldOwner, msg.sender);
  }

  /// @notice Get the current owner
  function owner() public view override returns (address) {
    return s_owner;
  }

  /// @notice validate, transfer ownership, and emit relevant events
  function _transferOwnership(address to) private {
    // solhint-disable-next-line gas-custom-errors
    require(to != msg.sender, "Cannot transfer to self");

    s_pendingOwner = to;

    emit OwnershipTransferRequested(s_owner, to);
  }

  /// @notice validate access
  function _validateOwnership() internal view {
    // solhint-disable-next-line gas-custom-errors
    require(msg.sender == s_owner, "Only callable by owner");
  }

  /// @notice Reverts if called by anyone other than the contract owner.
  modifier onlyOwner() {
    _validateOwnership();
    _;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {ConfirmedOwner} from "./ConfirmedOwner.sol";

/// @title The OwnerIsCreator contract
/// @notice A contract with helpers for basic contract ownership.
contract OwnerIsCreator is ConfirmedOwner {
  constructor() ConfirmedOwner(msg.sender) {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.6;

interface IERC677Receiver {
  function onTokenTransfer(address sender, uint256 amount, bytes calldata data) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IOwnable {
  function owner() external returns (address);

  function transferOwnership(address recipient) external;

  function acceptOwnership() external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IERC20} from "../../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/IERC20.sol";

interface IBurnMintERC20 is IERC20 {
  /// @notice Mints new tokens for a given address.
  /// @param account The address to mint the new tokens to.
  /// @param amount The number of tokens to be minted.
  /// @dev this function increases the total supply.
  function mint(address account, uint256 amount) external;

  /// @notice Burns tokens from the sender.
  /// @param amount The number of tokens to be burned.
  /// @dev this function decreases the total supply.
  function burn(uint256 amount) external;

  /// @notice Burns tokens from a given address..
  /// @param account The address to burn tokens from.
  /// @param amount The number of tokens to be burned.
  /// @dev this function decreases the total supply.
  function burn(address account, uint256 amount) external;

  /// @notice Burns tokens from a given address..
  /// @param account The address to burn tokens from.
  /// @param amount The number of tokens to be burned.
  /// @dev this function decreases the total supply.
  function burnFrom(address account, uint256 amount) external;
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;

import {IERC677} from "./IERC677.sol";
import {IERC677Receiver} from "../../interfaces/IERC677Receiver.sol";

import {ERC20} from "../../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/ERC20.sol";

contract ERC677 is IERC677, ERC20 {
  constructor(string memory name, string memory symbol) ERC20(name, symbol) {}

  /// @inheritdoc IERC677
  function transferAndCall(address to, uint256 amount, bytes memory data) public returns (bool success) {
    super.transfer(to, amount);
    emit Transfer(msg.sender, to, amount, data);
    if (to.code.length > 0) {
      IERC677Receiver(to).onTokenTransfer(msg.sender, amount, data);
    }
    return true;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IERC677 {
  event Transfer(address indexed from, address indexed to, uint256 value, bytes data);

  /// @notice Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
  /// @param to The address which you want to transfer to
  /// @param amount The amount of tokens to be transferred
  /// @param data bytes Additional data with no specified format, sent in call to `to`
  /// @return true unless throwing
  function transferAndCall(address to, uint256 amount, bytes memory data) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
  mapping(address => uint256) private _balances;

  mapping(address => mapping(address => uint256)) private _allowances;

  uint256 private _totalSupply;

  string private _name;
  string private _symbol;

  /**
   * @dev Sets the values for {name} and {symbol}.
   *
   * The default value of {decimals} is 18. To select a different value for
   * {decimals} you should overload it.
   *
   * All two of these values are immutable: they can only be set once during
   * construction.
   */
  constructor(string memory name_, string memory symbol_) {
    _name = name_;
    _symbol = symbol_;
  }

  /**
   * @dev Returns the name of the token.
   */
  function name() public view virtual override returns (string memory) {
    return _name;
  }

  /**
   * @dev Returns the symbol of the token, usually a shorter version of the
   * name.
   */
  function symbol() public view virtual override returns (string memory) {
    return _symbol;
  }

  /**
   * @dev Returns the number of decimals used to get its user representation.
   * For example, if `decimals` equals `2`, a balance of `505` tokens should
   * be displayed to a user as `5.05` (`505 / 10 ** 2`).
   *
   * Tokens usually opt for a value of 18, imitating the relationship between
   * Ether and Wei. This is the value {ERC20} uses, unless this function is
   * overridden;
   *
   * NOTE: This information is only used for _display_ purposes: it in
   * no way affects any of the arithmetic of the contract, including
   * {IERC20-balanceOf} and {IERC20-transfer}.
   */
  function decimals() public view virtual override returns (uint8) {
    return 18;
  }

  /**
   * @dev See {IERC20-totalSupply}.
   */
  function totalSupply() public view virtual override returns (uint256) {
    return _totalSupply;
  }

  /**
   * @dev See {IERC20-balanceOf}.
   */
  function balanceOf(address account) public view virtual override returns (uint256) {
    return _balances[account];
  }

  /**
   * @dev See {IERC20-transfer}.
   *
   * Requirements:
   *
   * - `to` cannot be the zero address.
   * - the caller must have a balance of at least `amount`.
   */
  function transfer(address to, uint256 amount) public virtual override returns (bool) {
    address owner = _msgSender();
    _transfer(owner, to, amount);
    return true;
  }

  /**
   * @dev See {IERC20-allowance}.
   */
  function allowance(address owner, address spender) public view virtual override returns (uint256) {
    return _allowances[owner][spender];
  }

  /**
   * @dev See {IERC20-approve}.
   *
   * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
   * `transferFrom`. This is semantically equivalent to an infinite approval.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function approve(address spender, uint256 amount) public virtual override returns (bool) {
    address owner = _msgSender();
    _approve(owner, spender, amount);
    return true;
  }

  /**
   * @dev See {IERC20-transferFrom}.
   *
   * Emits an {Approval} event indicating the updated allowance. This is not
   * required by the EIP. See the note at the beginning of {ERC20}.
   *
   * NOTE: Does not update the allowance if the current allowance
   * is the maximum `uint256`.
   *
   * Requirements:
   *
   * - `from` and `to` cannot be the zero address.
   * - `from` must have a balance of at least `amount`.
   * - the caller must have allowance for ``from``'s tokens of at least
   * `amount`.
   */
  function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
    address spender = _msgSender();
    _spendAllowance(from, spender, amount);
    _transfer(from, to, amount);
    return true;
  }

  /**
   * @dev Atomically increases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to {approve} that can be used as a mitigation for
   * problems described in {IERC20-approve}.
   *
   * Emits an {Approval} event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
    address owner = _msgSender();
    _approve(owner, spender, allowance(owner, spender) + addedValue);
    return true;
  }

  /**
   * @dev Atomically decreases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to {approve} that can be used as a mitigation for
   * problems described in {IERC20-approve}.
   *
   * Emits an {Approval} event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   * - `spender` must have allowance for the caller of at least
   * `subtractedValue`.
   */
  function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
    address owner = _msgSender();
    uint256 currentAllowance = allowance(owner, spender);
    require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
    unchecked {
      _approve(owner, spender, currentAllowance - subtractedValue);
    }

    return true;
  }

  /**
   * @dev Moves `amount` of tokens from `from` to `to`.
   *
   * This internal function is equivalent to {transfer}, and can be used to
   * e.g. implement automatic token fees, slashing mechanisms, etc.
   *
   * Emits a {Transfer} event.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `from` must have a balance of at least `amount`.
   */
  function _transfer(address from, address to, uint256 amount) internal virtual {
    require(from != address(0), "ERC20: transfer from the zero address");
    require(to != address(0), "ERC20: transfer to the zero address");

    _beforeTokenTransfer(from, to, amount);

    uint256 fromBalance = _balances[from];
    require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
    unchecked {
      _balances[from] = fromBalance - amount;
      // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
      // decrementing then incrementing.
      _balances[to] += amount;
    }

    emit Transfer(from, to, amount);

    _afterTokenTransfer(from, to, amount);
  }

  /** @dev Creates `amount` tokens and assigns them to `account`, increasing
   * the total supply.
   *
   * Emits a {Transfer} event with `from` set to the zero address.
   *
   * Requirements:
   *
   * - `account` cannot be the zero address.
   */
  function _mint(address account, uint256 amount) internal virtual {
    require(account != address(0), "ERC20: mint to the zero address");

    _beforeTokenTransfer(address(0), account, amount);

    _totalSupply += amount;
    unchecked {
      // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
      _balances[account] += amount;
    }
    emit Transfer(address(0), account, amount);

    _afterTokenTransfer(address(0), account, amount);
  }

  /**
   * @dev Destroys `amount` tokens from `account`, reducing the
   * total supply.
   *
   * Emits a {Transfer} event with `to` set to the zero address.
   *
   * Requirements:
   *
   * - `account` cannot be the zero address.
   * - `account` must have at least `amount` tokens.
   */
  function _burn(address account, uint256 amount) internal virtual {
    require(account != address(0), "ERC20: burn from the zero address");

    _beforeTokenTransfer(account, address(0), amount);

    uint256 accountBalance = _balances[account];
    require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
    unchecked {
      _balances[account] = accountBalance - amount;
      // Overflow not possible: amount <= accountBalance <= totalSupply.
      _totalSupply -= amount;
    }

    emit Transfer(account, address(0), amount);

    _afterTokenTransfer(account, address(0), amount);
  }

  /**
   * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
   *
   * This internal function is equivalent to `approve`, and can be used to
   * e.g. set automatic allowances for certain subsystems, etc.
   *
   * Emits an {Approval} event.
   *
   * Requirements:
   *
   * - `owner` cannot be the zero address.
   * - `spender` cannot be the zero address.
   */
  function _approve(address owner, address spender, uint256 amount) internal virtual {
    require(owner != address(0), "ERC20: approve from the zero address");
    require(spender != address(0), "ERC20: approve to the zero address");

    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }

  /**
   * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
   *
   * Does not update the allowance amount in case of infinite allowance.
   * Revert if not enough allowance is available.
   *
   * Might emit an {Approval} event.
   */
  function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
    uint256 currentAllowance = allowance(owner, spender);
    if (currentAllowance != type(uint256).max) {
      require(currentAllowance >= amount, "ERC20: insufficient allowance");
      unchecked {
        _approve(owner, spender, currentAllowance - amount);
      }
    }
  }

  /**
   * @dev Hook that is called before any transfer of tokens. This includes
   * minting and burning.
   *
   * Calling conditions:
   *
   * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
   * will be transferred to `to`.
   * - when `from` is zero, `amount` tokens will be minted for `to`.
   * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
   * - `from` and `to` are never both zero.
   *
   * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
   */
  function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

  /**
   * @dev Hook that is called after any transfer of tokens. This includes
   * minting and burning.
   *
   * Calling conditions:
   *
   * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
   * has been transferred to `to`.
   * - when `from` is zero, `amount` tokens have been minted for `to`.
   * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
   * - `from` and `to` are never both zero.
   *
   * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
   */
  function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)

pragma solidity ^0.8.0;

import "../ERC20.sol";
import "../../../utils/Context.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
  /**
   * @dev Destroys `amount` tokens from the caller.
   *
   * See {ERC20-_burn}.
   */
  function burn(uint256 amount) public virtual {
    _burn(_msgSender(), amount);
  }

  /**
   * @dev Destroys `amount` tokens from `account`, deducting from the caller's
   * allowance.
   *
   * See {ERC20-_burn} and {ERC20-allowance}.
   *
   * Requirements:
   *
   * - the caller must have allowance for ``accounts``'s tokens of at least
   * `amount`.
   */
  function burnFrom(address account, uint256 amount) public virtual {
    _spendAllowance(account, _msgSender(), amount);
    _burn(account, amount);
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
  /**
   * @dev Returns the name of the token.
   */
  function name() external view returns (string memory);

  /**
   * @dev Returns the symbol of the token.
   */
  function symbol() external view returns (string memory);

  /**
   * @dev Returns the decimals places of the token.
   */
  function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);

  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `to`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address to, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `from` to `to` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address) {
    return msg.sender;
  }

  function _msgData() internal view virtual returns (bytes calldata) {
    return msg.data;
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
  // To implement this library for multiple types with as little code
  // repetition as possible, we write it in terms of a generic Set type with
  // bytes32 values.
  // The Set implementation uses private functions, and user-facing
  // implementations (such as AddressSet) are just wrappers around the
  // underlying Set.
  // This means that we can only create new EnumerableSets for types that fit
  // in bytes32.

  struct Set {
    // Storage of set values
    bytes32[] _values;
    // Position of the value in the `values` array, plus 1 because index 0
    // means a value is not in the set.
    mapping(bytes32 => uint256) _indexes;
  }

  /**
   * @dev Add a value to a set. O(1).
   *
   * Returns true if the value was added to the set, that is if it was not
   * already present.
   */
  function _add(Set storage set, bytes32 value) private returns (bool) {
    if (!_contains(set, value)) {
      set._values.push(value);
      // The value is stored at length-1, but we add 1 to all indexes
      // and use 0 as a sentinel value
      set._indexes[value] = set._values.length;
      return true;
    } else {
      return false;
    }
  }

  /**
   * @dev Removes a value from a set. O(1).
   *
   * Returns true if the value was removed from the set, that is if it was
   * present.
   */
  function _remove(Set storage set, bytes32 value) private returns (bool) {
    // We read and store the value's index to prevent multiple reads from the same storage slot
    uint256 valueIndex = set._indexes[value];

    if (valueIndex != 0) {
      // Equivalent to contains(set, value)
      // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
      // the array, and then remove the last element (sometimes called as 'swap and pop').
      // This modifies the order of the array, as noted in {at}.

      uint256 toDeleteIndex = valueIndex - 1;
      uint256 lastIndex = set._values.length - 1;

      if (lastIndex != toDeleteIndex) {
        bytes32 lastValue = set._values[lastIndex];

        // Move the last value to the index where the value to delete is
        set._values[toDeleteIndex] = lastValue;
        // Update the index for the moved value
        set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
      }

      // Delete the slot where the moved value was stored
      set._values.pop();

      // Delete the index for the deleted slot
      delete set._indexes[value];

      return true;
    } else {
      return false;
    }
  }

  /**
   * @dev Returns true if the value is in the set. O(1).
   */
  function _contains(Set storage set, bytes32 value) private view returns (bool) {
    return set._indexes[value] != 0;
  }

  /**
   * @dev Returns the number of values on the set. O(1).
   */
  function _length(Set storage set) private view returns (uint256) {
    return set._values.length;
  }

  /**
   * @dev Returns the value stored at position `index` in the set. O(1).
   *
   * Note that there are no guarantees on the ordering of values inside the
   * array, and it may change when more values are added or removed.
   *
   * Requirements:
   *
   * - `index` must be strictly less than {length}.
   */
  function _at(Set storage set, uint256 index) private view returns (bytes32) {
    return set._values[index];
  }

  /**
   * @dev Return the entire set in an array
   *
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
   * this function has an unbounded cost, and using it as part of a state-changing function may render the function
   * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
   */
  function _values(Set storage set) private view returns (bytes32[] memory) {
    return set._values;
  }

  // Bytes32Set

  struct Bytes32Set {
    Set _inner;
  }

  /**
   * @dev Add a value to a set. O(1).
   *
   * Returns true if the value was added to the set, that is if it was not
   * already present.
   */
  function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
    return _add(set._inner, value);
  }

  /**
   * @dev Removes a value from a set. O(1).
   *
   * Returns true if the value was removed from the set, that is if it was
   * present.
   */
  function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
    return _remove(set._inner, value);
  }

  /**
   * @dev Returns true if the value is in the set. O(1).
   */
  function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
    return _contains(set._inner, value);
  }

  /**
   * @dev Returns the number of values in the set. O(1).
   */
  function length(Bytes32Set storage set) internal view returns (uint256) {
    return _length(set._inner);
  }

  /**
   * @dev Returns the value stored at position `index` in the set. O(1).
   *
   * Note that there are no guarantees on the ordering of values inside the
   * array, and it may change when more values are added or removed.
   *
   * Requirements:
   *
   * - `index` must be strictly less than {length}.
   */
  function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
    return _at(set._inner, index);
  }

  /**
   * @dev Return the entire set in an array
   *
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
   * this function has an unbounded cost, and using it as part of a state-changing function may render the function
   * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
   */
  function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
    bytes32[] memory store = _values(set._inner);
    bytes32[] memory result;

    /// @solidity memory-safe-assembly
    assembly {
      result := store
    }

    return result;
  }

  // AddressSet

  struct AddressSet {
    Set _inner;
  }

  /**
   * @dev Add a value to a set. O(1).
   *
   * Returns true if the value was added to the set, that is if it was not
   * already present.
   */
  function add(AddressSet storage set, address value) internal returns (bool) {
    return _add(set._inner, bytes32(uint256(uint160(value))));
  }

  /**
   * @dev Removes a value from a set. O(1).
   *
   * Returns true if the value was removed from the set, that is if it was
   * present.
   */
  function remove(AddressSet storage set, address value) internal returns (bool) {
    return _remove(set._inner, bytes32(uint256(uint160(value))));
  }

  /**
   * @dev Returns true if the value is in the set. O(1).
   */
  function contains(AddressSet storage set, address value) internal view returns (bool) {
    return _contains(set._inner, bytes32(uint256(uint160(value))));
  }

  /**
   * @dev Returns the number of values in the set. O(1).
   */
  function length(AddressSet storage set) internal view returns (uint256) {
    return _length(set._inner);
  }

  /**
   * @dev Returns the value stored at position `index` in the set. O(1).
   *
   * Note that there are no guarantees on the ordering of values inside the
   * array, and it may change when more values are added or removed.
   *
   * Requirements:
   *
   * - `index` must be strictly less than {length}.
   */
  function at(AddressSet storage set, uint256 index) internal view returns (address) {
    return address(uint160(uint256(_at(set._inner, index))));
  }

  /**
   * @dev Return the entire set in an array
   *
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
   * this function has an unbounded cost, and using it as part of a state-changing function may render the function
   * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
   */
  function values(AddressSet storage set) internal view returns (address[] memory) {
    bytes32[] memory store = _values(set._inner);
    address[] memory result;

    /// @solidity memory-safe-assembly
    assembly {
      result := store
    }

    return result;
  }

  // UintSet

  struct UintSet {
    Set _inner;
  }

  /**
   * @dev Add a value to a set. O(1).
   *
   * Returns true if the value was added to the set, that is if it was not
   * already present.
   */
  function add(UintSet storage set, uint256 value) internal returns (bool) {
    return _add(set._inner, bytes32(value));
  }

  /**
   * @dev Removes a value from a set. O(1).
   *
   * Returns true if the value was removed from the set, that is if it was
   * present.
   */
  function remove(UintSet storage set, uint256 value) internal returns (bool) {
    return _remove(set._inner, bytes32(value));
  }

  /**
   * @dev Returns true if the value is in the set. O(1).
   */
  function contains(UintSet storage set, uint256 value) internal view returns (bool) {
    return _contains(set._inner, bytes32(value));
  }

  /**
   * @dev Returns the number of values in the set. O(1).
   */
  function length(UintSet storage set) internal view returns (uint256) {
    return _length(set._inner);
  }

  /**
   * @dev Returns the value stored at position `index` in the set. O(1).
   *
   * Note that there are no guarantees on the ordering of values inside the
   * array, and it may change when more values are added or removed.
   *
   * Requirements:
   *
   * - `index` must be strictly less than {length}.
   */
  function at(UintSet storage set, uint256 index) internal view returns (uint256) {
    return uint256(_at(set._inner, index));
  }

  /**
   * @dev Return the entire set in an array
   *
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
   * this function has an unbounded cost, and using it as part of a state-changing function may render the function
   * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
   */
  function values(UintSet storage set) internal view returns (uint256[] memory) {
    bytes32[] memory store = _values(set._inner);
    uint256[] memory result;

    /// @solidity memory-safe-assembly
    assembly {
      result := store
    }

    return result;
  }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 1
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"symbol","type":"string"},{"internalType":"uint8","name":"decimals_","type":"uint8"},{"internalType":"uint256","name":"maxSupply_","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"uint256","name":"supplyAfterMint","type":"uint256"}],"name":"MaxSupplyExceeded","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"SenderNotBurner","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"SenderNotMinter","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"burner","type":"address"}],"name":"BurnAccessGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"burner","type":"address"}],"name":"BurnAccessRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"minter","type":"address"}],"name":"MintAccessGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"minter","type":"address"}],"name":"MintAccessRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"}],"name":"OwnershipTransferRequested","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"data","type":"bytes"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseApproval","outputs":[{"internalType":"bool","name":"success","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getBurners","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getMinters","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"burner","type":"address"}],"name":"grantBurnRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"burnAndMinter","type":"address"}],"name":"grantMintAndBurnRoles","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"minter","type":"address"}],"name":"grantMintRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseApproval","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"burner","type":"address"}],"name":"isBurner","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"minter","type":"address"}],"name":"isMinter","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"burner","type":"address"}],"name":"revokeBurnRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"minter","type":"address"}],"name":"revokeMintRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"transferAndCall","outputs":[{"internalType":"bool","name":"success","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000000000000000000000000000000000000000008000000000000000000000000000000000000000000000000000000000000000c0000000000000000000000000000000000000000000000000000000000000001200000000000000000000000000000000000000000051e410c0f93fe5430000000000000000000000000000000000000000000000000000000000000000000004536f696c000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000004534f494c00000000000000000000000000000000000000000000000000000000

-----Decoded View---------------
Arg [0] : name (string): Soil
Arg [1] : symbol (string): SOIL
Arg [2] : decimals_ (uint8): 18
Arg [3] : maxSupply_ (uint256): 99000000000000000000000000

-----Encoded View---------------
8 Constructor Arguments found :
Arg [0] : 0000000000000000000000000000000000000000000000000000000000000080
Arg [1] : 00000000000000000000000000000000000000000000000000000000000000c0
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000012
Arg [3] : 00000000000000000000000000000000000000000051e410c0f93fe543000000
Arg [4] : 0000000000000000000000000000000000000000000000000000000000000004
Arg [5] : 536f696c00000000000000000000000000000000000000000000000000000000
Arg [6] : 0000000000000000000000000000000000000000000000000000000000000004
Arg [7] : 534f494c00000000000000000000000000000000000000000000000000000000