Token Okuru Token

 

Overview [ERC-20]

Price
$29.02 @ 0.015595 Eth (+0.76%)
Fully Diluted Market Cap
Max Total Supply:
150,000 XOT

Holders:
446 (0.00%)

Transfers:
-

 
Loading
[ Download CSV Export  ] 
Loading
[ Download CSV Export  ] 
Loading

OVERVIEW

Okuru is a Multi-chain Payment Token that empowers its users to completely control their finances/Assets, a Decentralized peer-to-peer currency, tradable and accessible to everyone anywhere to enable a more liberated payment solution.

# Exchange Pair Price  24H Volume % Volume
Loading

Similar Match Source Code
Note: This contract matches the deployed ByteCode of the Source Code for Contract 0x4391f29d3bca9a765beccc482574acf28a392b8d

Contract Name:
CommonERC20

Compiler Version
v0.7.4+commit.3f05b770

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion, MIT license

Contract Source Code (Solidity)

/**
 *Submitted for verification at Etherscan.io on 2020-11-03
*/

// File: @openzeppelin/contracts/GSN/Context.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol



pragma solidity ^0.7.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol



pragma solidity ^0.7.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/math/SafeMath.sol



pragma solidity ^0.7.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/utils/Address.sol



pragma solidity ^0.7.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol



pragma solidity ^0.7.0;





/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20Burnable.sol



pragma solidity ^0.7.0;



/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    using SafeMath for uint256;

    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20Capped.sol



pragma solidity ^0.7.0;


/**
 * @dev Extension of {ERC20} that adds a cap to the supply of tokens.
 */
abstract contract ERC20Capped is ERC20 {
    using SafeMath for uint256;

    uint256 private _cap;

    /**
     * @dev Sets the value of the `cap`. This value is immutable, it can only be
     * set once during construction.
     */
    constructor (uint256 cap_) {
        require(cap_ > 0, "ERC20Capped: cap is 0");
        _cap = cap_;
    }

    /**
     * @dev Returns the cap on the token's total supply.
     */
    function cap() public view returns (uint256) {
        return _cap;
    }

    /**
     * @dev See {ERC20-_beforeTokenTransfer}.
     *
     * Requirements:
     *
     * - minted tokens must not cause the total supply to go over the cap.
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
        super._beforeTokenTransfer(from, to, amount);

        if (from == address(0)) { // When minting tokens
            require(totalSupply().add(amount) <= _cap, "ERC20Capped: cap exceeded");
        }
    }
}

// File: eth-token-recover/contracts/TokenRecover.sol



pragma solidity ^0.7.0;



/**
 * @title TokenRecover
 * @dev Allow to recover any ERC20 sent into the contract for error
 */
contract TokenRecover is Ownable {

    /**
     * @dev Remember that only owner can call so be careful when use on contracts generated from other contracts.
     * @param tokenAddress The token contract address
     * @param tokenAmount Number of tokens to be sent
     */
    function recoverERC20(address tokenAddress, uint256 tokenAmount) public onlyOwner {
        IERC20(tokenAddress).transfer(owner(), tokenAmount);
    }
}

// File: contracts/service/ServiceReceiver.sol



pragma solidity ^0.7.0;


/**
 * @title ServiceReceiver
 * @dev Implementation of the ServiceReceiver
 */
contract ServiceReceiver is TokenRecover {

    mapping (bytes32 => uint256) private _prices;

    event Created(string serviceName, address indexed serviceAddress);

    function pay(string memory serviceName) public payable {
        require(msg.value == _prices[_toBytes32(serviceName)], "ServiceReceiver: incorrect price");

        emit Created(serviceName, _msgSender());
    }

    function getPrice(string memory serviceName) public view returns (uint256) {
        return _prices[_toBytes32(serviceName)];
    }

    function setPrice(string memory serviceName, uint256 amount) public onlyOwner {
        _prices[_toBytes32(serviceName)] = amount;
    }

    function withdraw(uint256 amount) public onlyOwner {
        payable(owner()).transfer(amount);
    }

    function _toBytes32(string memory serviceName) private pure returns (bytes32) {
        return keccak256(abi.encode(serviceName));
    }
}

// File: contracts/service/ServicePayer.sol



pragma solidity ^0.7.0;


/**
 * @title ServicePayer
 * @dev Implementation of the ServicePayer
 */
contract ServicePayer {

    constructor (address payable receiver, string memory serviceName) payable {
        ServiceReceiver(receiver).pay{value: msg.value}(serviceName);
    }
}

// File: contracts/token/ERC20/CommonERC20.sol



pragma solidity ^0.7.0;





/**
 * @title CommonERC20
 * @dev Implementation of the CommonERC20
 */
contract CommonERC20 is ERC20Capped, ERC20Burnable, Ownable, ServicePayer {

    // indicates if minting is finished
    bool private _mintingFinished = false;

    /**
     * @dev Emitted during finish minting
     */
    event MintFinished();

    /**
     * @dev Tokens can be minted only before minting finished.
     */
    modifier canMint() {
        require(!_mintingFinished, "CommonERC20: minting is finished");
        _;
    }

    constructor (
        string memory name,
        string memory symbol,
        uint8 decimals,
        uint256 cap,
        uint256 initialBalance,
        address payable feeReceiver
    ) ERC20(name, symbol) ERC20Capped(cap) ServicePayer(feeReceiver, "CommonERC20") payable {
        _setupDecimals(decimals);

        _mint(_msgSender(), initialBalance);
    }

    /**
     * @return if minting is finished or not.
     */
    function mintingFinished() public view returns (bool) {
        return _mintingFinished;
    }

    /**
     * @dev Function to mint tokens.
     * @param to The address that will receive the minted tokens
     * @param value The amount of tokens to mint
     */
    function mint(address to, uint256 value) public canMint onlyOwner {
        _mint(to, value);
    }

    /**
     * @dev Function to stop minting new tokens.
     */
    function finishMinting() public canMint onlyOwner {
        _mintingFinished = true;

        emit MintFinished();
    }

    /**
     * @dev See {ERC20-_beforeTokenTransfer}.
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override(ERC20, ERC20Capped) {
        super._beforeTokenTransfer(from, to, amount);
    }
}

Contract Security Audit

Contract ABI

[{"inputs":[{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"symbol","type":"string"},{"internalType":"uint8","name":"decimals","type":"uint8"},{"internalType":"uint256","name":"cap","type":"uint256"},{"internalType":"uint256","name":"initialBalance","type":"uint256"},{"internalType":"address payable","name":"feeReceiver","type":"address"}],"stateMutability":"payable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[],"name":"MintFinished","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"cap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"finishMinting","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"mintingFinished","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

Deployed ByteCode Sourcemap

33433:1744:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;34343:96;;;:::i;:::-;;;;;;;;;;;;;;;;;;19920:83;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;22026:169;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;22026:169:0;;;;;;;;:::i;20995:100::-;;;:::i;:::-;;;;;;;;;;;;;;;;22669:321;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;22669:321:0;;;;;;;;;;;;;;;;;:::i;20847:83::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;;30582:75;;;:::i;23399:218::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;23399:218:0;;;;;;;;:::i;34619:101::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;34619:101:0;;;;;;;;:::i;:::-;;29250:91;;;;;;;;;;;;;;;;-1:-1:-1;29250:91:0;;:::i;21158:119::-;;;;;;;;;;;;;;;;-1:-1:-1;21158:119:0;-1:-1:-1;;;;;21158:119:0;;:::i;2747:148::-;;;:::i;29660:295::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;29660:295:0;;;;;;;;:::i;34796:124::-;;;:::i;2105:79::-;;;:::i;:::-;;;;-1:-1:-1;;;;;2105:79:0;;;;;;;;;;;;;;20122:87;;;:::i;24120:269::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;24120:269:0;;;;;;;;:::i;21490:175::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;21490:175:0;;;;;;;;:::i;21728:151::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;21728:151:0;;;;;;;;;;:::i;3050:244::-;;;;;;;;;;;;;;;;-1:-1:-1;3050:244:0;-1:-1:-1;;;;;3050:244:0;;:::i;34343:96::-;34415:16;;-1:-1:-1;;;34415:16:0;;;;;34343:96::o;19920:83::-;19990:5;19983:12;;;;;;;;-1:-1:-1;;19983:12:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;19957:13;;19983:12;;19990:5;;19983:12;;19990:5;19983:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;19920:83;:::o;22026:169::-;22109:4;22126:39;22135:12;:10;:12::i;:::-;22149:7;22158:6;22126:8;:39::i;:::-;-1:-1:-1;22183:4:0;22026:169;;;;:::o;20995:100::-;21075:12;;20995:100;:::o;22669:321::-;22775:4;22792:36;22802:6;22810:9;22821:6;22792:9;:36::i;:::-;22839:121;22848:6;22856:12;:10;:12::i;:::-;22870:89;22908:6;22870:89;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;22870:19:0;;;;;;:11;:19;;;;;;22890:12;:10;:12::i;:::-;-1:-1:-1;;;;;22870:33:0;;;;;;;;;;;;-1:-1:-1;22870:33:0;;;:89;:37;:89::i;:::-;22839:8;:121::i;:::-;-1:-1:-1;22978:4:0;22669:321;;;;;:::o;20847:83::-;20913:9;;;;20847:83;:::o;30582:75::-;30645:4;;30582:75;:::o;23399:218::-;23487:4;23504:83;23513:12;:10;:12::i;:::-;23527:7;23536:50;23575:10;23536:11;:25;23548:12;:10;:12::i;:::-;-1:-1:-1;;;;;23536:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;23536:25:0;;;:34;;;;;;;;;;;:38;:50::i;34619:101::-;33814:16;;-1:-1:-1;;;33814:16:0;;;;33813:17;33805:62;;;;;-1:-1:-1;;;33805:62:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;2327:12:::1;:10;:12::i;:::-;2317:6;::::0;-1:-1:-1;;;;;2317:6:0;;::::1;:22:::0;::::1;;2309:67;;;::::0;;-1:-1:-1;;;2309:67:0;;::::1;;::::0;::::1;::::0;;;;;;;-1:-1:-1;;;;;;;;;;;2309:67:0;;;;;;;;;;;;;::::1;;34696:16:::2;34702:2;34706:5;34696;:16::i;:::-;34619:101:::0;;:::o;29250:91::-;29306:27;29312:12;:10;:12::i;:::-;29326:6;29306:5;:27::i;:::-;29250:91;:::o;21158:119::-;-1:-1:-1;;;;;21251:18:0;21224:7;21251:18;;;;;;;;;;;;21158:119::o;2747:148::-;2327:12;:10;:12::i;:::-;2317:6;;-1:-1:-1;;;;;2317:6:0;;;:22;;;2309:67;;;;;-1:-1:-1;;;2309:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2309:67:0;;;;;;;;;;;;;;;2838:6:::1;::::0;2817:40:::1;::::0;2854:1:::1;::::0;-1:-1:-1;;;;;2838:6:0::1;::::0;2817:40:::1;::::0;2854:1;;2817:40:::1;2868:6;:19:::0;;-1:-1:-1;;;;;;2868:19:0::1;::::0;;2747:148::o;29660:295::-;29737:26;29766:84;29803:6;29766:84;;;;;;;;;;;;;;;;;:32;29776:7;29785:12;:10;:12::i;:::-;29766:9;:32::i;:::-;:36;:84;:36;:84::i;:::-;29737:113;;29863:51;29872:7;29881:12;:10;:12::i;:::-;29895:18;29863:8;:51::i;:::-;29925:22;29931:7;29940:6;29925:5;:22::i;:::-;29660:295;;;:::o;34796:124::-;33814:16;;-1:-1:-1;;;33814:16:0;;;;33813:17;33805:62;;;;;-1:-1:-1;;;33805:62:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;2327:12:::1;:10;:12::i;:::-;2317:6;::::0;-1:-1:-1;;;;;2317:6:0;;::::1;:22:::0;::::1;;2309:67;;;::::0;;-1:-1:-1;;;2309:67:0;;::::1;;::::0;::::1;::::0;;;;;;;-1:-1:-1;;;;;;;;;;;2309:67:0;;;;;;;;;;;;;::::1;;34857:16:::2;:23:::0;;-1:-1:-1;;;;34857:23:0::2;-1:-1:-1::0;;;34857:23:0::2;::::0;;34898:14:::2;::::0;::::2;::::0;34857:23;;34898:14:::2;34796:124::o:0;2105:79::-;2170:6;;-1:-1:-1;;;;;2170:6:0;2105:79;:::o;20122:87::-;20194:7;20187:14;;;;;;;;-1:-1:-1;;20187:14:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;20161:13;;20187:14;;20194:7;;20187:14;;20194:7;20187:14;;;;;;;;;;;;;;;;;;;;;;;;24120:269;24213:4;24230:129;24239:12;:10;:12::i;:::-;24253:7;24262:96;24301:15;24262:96;;;;;;;;;;;;;;;;;:11;:25;24274:12;:10;:12::i;:::-;-1:-1:-1;;;;;24262:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;24262:25:0;;;:34;;;;;;;;;;;:96;:38;:96::i;21490:175::-;21576:4;21593:42;21603:12;:10;:12::i;:::-;21617:9;21628:6;21593:9;:42::i;21728:151::-;-1:-1:-1;;;;;21844:18:0;;;21817:7;21844:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;21728:151::o;3050:244::-;2327:12;:10;:12::i;:::-;2317:6;;-1:-1:-1;;;;;2317:6:0;;;:22;;;2309:67;;;;;-1:-1:-1;;;2309:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2309:67:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;3139:22:0;::::1;3131:73;;;;-1:-1:-1::0;;;3131:73:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;3241:6;::::0;3220:38:::1;::::0;-1:-1:-1;;;;;3220:38:0;;::::1;::::0;3241:6:::1;::::0;3220:38:::1;::::0;3241:6:::1;::::0;3220:38:::1;3269:6;:17:::0;;-1:-1:-1;;;;;;3269:17:0::1;-1:-1:-1::0;;;;;3269:17:0;;;::::1;::::0;;;::::1;::::0;;3050:244::o;7029:181::-;7087:7;7119:5;;;7143:6;;;;7135:46;;;;;-1:-1:-1;;;7135:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;7201:1;7029:181;-1:-1:-1;;;7029:181:0:o;30844:318::-;30953:44;30980:4;30986:2;30990:6;30953:26;:44::i;:::-;-1:-1:-1;;;;;31014:18:0;;31010:145;;31109:4;;31080:25;31098:6;31080:13;:11;:13::i;:::-;:17;;:25::i;:::-;:33;;31072:71;;;;;-1:-1:-1;;;31072:71:0;;;;;;;;;;;;;;;;;;;;;;;;;;;657:106;745:10;657:106;:::o;27265:346::-;-1:-1:-1;;;;;27367:19:0;;27359:68;;;;-1:-1:-1;;;27359:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;27446:21:0;;27438:68;;;;-1:-1:-1;;;27438:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;27519:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;27571:32;;;;;;;;;;;;;;;;;27265:346;;;:::o;24879:539::-;-1:-1:-1;;;;;24985:20:0;;24977:70;;;;-1:-1:-1;;;24977:70:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;25066:23:0;;25058:71;;;;-1:-1:-1;;;25058:71:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;25142:47;25163:6;25171:9;25182:6;25142:20;:47::i;:::-;25222:71;25244:6;25222:71;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;25222:17:0;;:9;:17;;;;;;;;;;;;:71;:21;:71::i;:::-;-1:-1:-1;;;;;25202:17:0;;;:9;:17;;;;;;;;;;;:91;;;;25327:20;;;;;;;:32;;25352:6;25327:24;:32::i;:::-;-1:-1:-1;;;;;25304:20:0;;;:9;:20;;;;;;;;;;;;:55;;;;25375:35;;;;;;;25304:20;;25375:35;;;;;;;;;;;;;24879:539;;;:::o;7932:192::-;8018:7;8054:12;8046:6;;;;8038:29;;;;-1:-1:-1;;;8038:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;8090:5:0;;;7932:192::o;25699:378::-;-1:-1:-1;;;;;25783:21:0;;25775:65;;;;;-1:-1:-1;;;25775:65:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;25853:49;25882:1;25886:7;25895:6;25853:20;:49::i;:::-;25930:12;;:24;;25947:6;25930:16;:24::i;:::-;25915:12;:39;-1:-1:-1;;;;;25986:18:0;;:9;:18;;;;;;;;;;;:30;;26009:6;25986:22;:30::i;:::-;-1:-1:-1;;;;;25965:18:0;;:9;:18;;;;;;;;;;;:51;;;;26032:37;;;;;;;25965:18;;:9;;26032:37;;;;;;;;;;25699:378;;:::o;26409:418::-;-1:-1:-1;;;;;26493:21:0;;26485:67;;;;-1:-1:-1;;;26485:67:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;26565:49;26586:7;26603:1;26607:6;26565:20;:49::i;:::-;26648:68;26671:6;26648:68;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;26648:18:0;;:9;:18;;;;;;;;;;;;:68;:22;:68::i;:::-;-1:-1:-1;;;;;26627:18:0;;:9;:18;;;;;;;;;;:89;26742:12;;:24;;26759:6;26742:16;:24::i;:::-;26727:12;:39;26782:37;;;;;;;;26808:1;;-1:-1:-1;;;;;26782:37:0;;;;;;;;;;;;26409:418;;:::o;34993:181::-;35122:44;35149:4;35155:2;35159:6;35122:26;:44::i;7493:136::-;7551:7;7578:43;7582:1;7585;7578:43;;;;;;;;;;;;;;;;;:3;:43::i

Swarm Source

ipfs://36a5b27ec29c929302d2fd75dc0a6e92c52f44256ba657fb2bda0f3a85a63ba1

A token is a representation of an on-chain or off-chain asset. The token page shows information such as price, total supply, holders, transfers and social links. Learn more about this page in our Knowledge Base.