Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

/*
hahaha
*/


// SPDX-License-Identifier: No License
pragma solidity 0.8.25;

import {IERC20, ERC20} from "./ERC20.sol";
import {ERC20Burnable} from "./ERC20Burnable.sol";
import {Ownable, Ownable2Step} from "./Ownable2Step.sol";
import {SafeERC20Remastered} from "./SafeERC20Remastered.sol";

import {ERC20Permit} from "./ERC20Permit.sol";
import {Initializable} from "./Initializable.sol";
import "./IUniswapV2Factory.sol";
import "./IUniswapV2Pair.sol";
import "./IUniswapV2Router01.sol";
import "./IUniswapV2Router02.sol";

contract Dont_Buy is ERC20, ERC20Burnable, Ownable2Step, ERC20Permit, Initializable {
    
    using SafeERC20Remastered for IERC20;
 
    uint16 public swapThresholdRatio;
    
    uint256 private _launchPending;

    address public launchAddress;
    uint16[3] public launchFees;

    mapping (address => bool) public isExcludedFromFees;

    uint16[3] public totalFees;
    bool private _swapping;

    IUniswapV2Router02 public routerV2;
    address public pairV2;
    mapping (address => bool) public AMMs;

    mapping (address => bool) public isExcludedFromLimits;

    uint256 public maxWalletAmount;
 
    error InvalidAmountToRecover(uint256 amount, uint256 maxAmount);

    error InvalidToken(address tokenAddress);

    error CannotDepositNativeCoins(address account);

    error InvalidSwapThresholdRatio(uint16 swapThresholdRatio);

    error InvalidTaxRecipientAddress(address account);

    error CannotExceedMaxTotalFee(uint16 buyFee, uint16 sellFee, uint16 transferFee);

    error InvalidAMM(address AMM);

    error MaxWalletAmountTooLow(uint256 maxWalletAmount, uint256 limit);
    error CannotExceedMaxWalletAmount(uint256 maxWalletAmount);
 
    event SwapThresholdUpdated(uint16 swapThresholdRatio);

    event WalletTaxAddressUpdated(uint8 indexed id, address newAddress);
    event WalletTaxFeesUpdated(uint8 indexed id, uint16 buyFee, uint16 sellFee, uint16 transferFee);
    event WalletTaxSent(uint8 indexed id, address recipient, uint256 amount);

    event ExcludeFromFees(address indexed account, bool isExcluded);

    event RouterV2Updated(address indexed routerV2);
    event AMMUpdated(address indexed AMM, bool isAMM);

    event ExcludeFromLimits(address indexed account, bool isExcluded);

    event MaxWalletAmountUpdated(uint256 maxWalletAmount);
 
    constructor()
        ERC20(unicode"Dont", unicode"RUG")
        Ownable(msg.sender)
        ERC20Permit(unicode"Dont")
    {
        address supplyRecipient = 0x5fCB64C83E9DBD8e6141E78F10bEdc55a33Dc76c;
        
        updateSwapThreshold(50);

        launchAddressSetup(0x5fCB64C83E9DBD8e6141E78F10bEdc55a33Dc76c);
        launchFeesSetup(2500, 2500, 0);

        excludeFromFees(supplyRecipient, true);
        excludeFromFees(address(this), true); 

        _excludeFromLimits(supplyRecipient, true);
        _excludeFromLimits(address(this), true);
        _excludeFromLimits(address(0), true); 

        updateMaxWalletAmount(250000000 * (10 ** decimals()) / 10);

        _mint(supplyRecipient, 1000000000 * (10 ** decimals()) / 10);
        _transferOwnership(0x5fCB64C83E9DBD8e6141E78F10bEdc55a33Dc76c);
    }
    
    /*
        This token is not upgradeable. Function afterConstructor finishes post-deployment setup.
    */
    function afterConstructor(address _router) initializer external {
        _updateRouterV2(_router);
    }

    function decimals() public pure override returns (uint8) {
        return 18;
    }
    
    function recoverToken(uint256 amount) external onlyOwner {
        uint256 maxRecoverable = balanceOf(address(this)) - getAllPending();
        if (amount > maxRecoverable) revert InvalidAmountToRecover(amount, maxRecoverable);

        _update(address(this), msg.sender, amount);
    }

    function recoverForeignERC20(address tokenAddress, uint256 amount) external onlyOwner {
        if (tokenAddress == address(this)) revert InvalidToken(tokenAddress);

        IERC20(tokenAddress).safeTransfer(msg.sender, amount);
    }

    // Prevent unintended coin transfers
    receive() external payable {
        if (msg.sender != address(routerV2)) revert CannotDepositNativeCoins(msg.sender);
    }

    function _swapTokensForCoin(uint256 tokenAmount) private {
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = routerV2.WETH();

        _approve(address(this), address(routerV2), tokenAmount);

        routerV2.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount, 0, path, address(this), block.timestamp);
    }

    function updateSwapThreshold(uint16 _swapThresholdRatio) public onlyOwner {
        if (_swapThresholdRatio == 0 || _swapThresholdRatio > 500) revert InvalidSwapThresholdRatio(_swapThresholdRatio);

        swapThresholdRatio = _swapThresholdRatio;
        
        emit SwapThresholdUpdated(_swapThresholdRatio);
    }

    function getSwapThresholdAmount() public view returns (uint256) {
        return balanceOf(pairV2) * swapThresholdRatio / 10000;
    }

    function getAllPending() public view returns (uint256) {
        return 0 + _launchPending;
    }

    function launchAddressSetup(address _newAddress) public onlyOwner {
        if (_newAddress == address(0)) revert InvalidTaxRecipientAddress(address(0));

        launchAddress = _newAddress;
        excludeFromFees(_newAddress, true);
        _excludeFromLimits(_newAddress, true);

        emit WalletTaxAddressUpdated(1, _newAddress);
    }

    function launchFeesSetup(uint16 _buyFee, uint16 _sellFee, uint16 _transferFee) public onlyOwner {
        totalFees[0] = totalFees[0] - launchFees[0] + _buyFee;
        totalFees[1] = totalFees[1] - launchFees[1] + _sellFee;
        totalFees[2] = totalFees[2] - launchFees[2] + _transferFee;
        if (totalFees[0] > 2500 || totalFees[1] > 2500 || totalFees[2] > 2500) revert CannotExceedMaxTotalFee(totalFees[0], totalFees[1], totalFees[2]);

        launchFees = [_buyFee, _sellFee, _transferFee];

        emit WalletTaxFeesUpdated(1, _buyFee, _sellFee, _transferFee);
    }

    function excludeFromFees(address account, bool isExcluded) public onlyOwner {
        isExcludedFromFees[account] = isExcluded;
        
        emit ExcludeFromFees(account, isExcluded);
    }

    function _updateRouterV2(address router) private {
        routerV2 = IUniswapV2Router02(router);
        pairV2 = IUniswapV2Factory(routerV2.factory()).createPair(address(this), routerV2.WETH());
        
        _setAMM(router, true);
        _setAMM(pairV2, true);

        emit RouterV2Updated(router);
    }

    function setAMM(address AMM, bool isAMM) external onlyOwner {
        if (AMM == pairV2 || AMM == address(routerV2)) revert InvalidAMM(AMM);

        _setAMM(AMM, isAMM);
    }

    function _setAMM(address AMM, bool isAMM) private {
        AMMs[AMM] = isAMM;

        if (isAMM) { 
            _excludeFromLimits(AMM, true);

        }

        emit AMMUpdated(AMM, isAMM);
    }

    function excludeFromLimits(address account, bool isExcluded) external onlyOwner {
        _excludeFromLimits(account, isExcluded);
    }

    function _excludeFromLimits(address account, bool isExcluded) internal {
        isExcludedFromLimits[account] = isExcluded;

        emit ExcludeFromLimits(account, isExcluded);
    }

    function updateMaxWalletAmount(uint256 _maxWalletAmount) public onlyOwner {
        if (_maxWalletAmount < _maxWalletSafeLimit()) revert MaxWalletAmountTooLow(_maxWalletAmount, _maxWalletSafeLimit());

        maxWalletAmount = _maxWalletAmount;
        
        emit MaxWalletAmountUpdated(_maxWalletAmount);
    }

    function _maxWalletSafeLimit() private view returns (uint256) {
        return totalSupply() / 1000;
    }


    function _update(address from, address to, uint256 amount)
        internal
        override
    {
        _beforeTokenUpdate(from, to, amount);
        
        if (from != address(0) && to != address(0)) {
            if (!_swapping && amount > 0 && !isExcludedFromFees[from] && !isExcludedFromFees[to]) {
                uint256 fees = 0;
                uint8 txType = 3;
                
                if (AMMs[from] && !AMMs[to]) {
                    if (totalFees[0] > 0) txType = 0;
                }
                else if (AMMs[to] && !AMMs[from]) {
                    if (totalFees[1] > 0) txType = 1;
                }
                else if (!AMMs[from] && !AMMs[to]) {
                    if (totalFees[2] > 0) txType = 2;
                }
                
                if (txType < 3) {
                    
                    fees = amount * totalFees[txType] / 10000;
                    amount -= fees;
                    
                    _launchPending += fees * launchFees[txType] / totalFees[txType];

                    
                }

                if (fees > 0) {
                    super._update(from, address(this), fees);
                }
            }
            
            bool canSwap = getAllPending() >= getSwapThresholdAmount() && balanceOf(pairV2) > 0;
            
            if (!_swapping && from != pairV2 && from != address(routerV2) && canSwap) {
                _swapping = true;
                
                if (false || _launchPending > 0) {
                    uint256 token2Swap = 0 + _launchPending;
                    bool success = false;

                    _swapTokensForCoin(token2Swap);
                    uint256 coinsReceived = address(this).balance;
                    
                    uint256 launchPortion = coinsReceived * _launchPending / token2Swap;
                    if (launchPortion > 0) {
                        (success,) = payable(launchAddress).call{value: launchPortion}("");
                        if (success) {
                            emit WalletTaxSent(1, launchAddress, launchPortion);
                        }
                    }
                    _launchPending = 0;

                }

                _swapping = false;
            }

        }

        super._update(from, to, amount);
        
        _afterTokenUpdate(from, to, amount);
        
    }

    function _beforeTokenUpdate(address from, address to, uint256 amount)
        internal
        view
    {
    }

    function _afterTokenUpdate(address from, address to, uint256 amount)
        internal
    {
        if (!isExcludedFromLimits[to] && balanceOf(to) > maxWalletAmount) {
            revert CannotExceedMaxWalletAmount(maxWalletAmount);
        }

    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./IERC20Metadata.sol";
import {Context} from "./Context.sol";
import {IERC20Errors} from "./draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Burnable.sol)

pragma solidity ^0.8.20;

import {ERC20} from "./ERC20.sol";
import {Context} from "./Context.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys a `value` amount of tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 value) public virtual {
        _burn(_msgSender(), value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, deducting from
     * the caller's allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `value`.
     */
    function burnFrom(address account, uint256 value) public virtual {
        _spendAllowance(account, _msgSender(), value);
        _burn(account, value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable2Step.sol)

pragma solidity ^0.8.20;

import {Ownable} from "./Ownable.sol";

/**
 * @dev Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is specified at deployment time in the constructor for `Ownable`. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2Step is Ownable {
    address private _pendingOwner;

    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        return _pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual override onlyOwner {
        _pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        delete _pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() public virtual {
        address sender = _msgSender();
        if (pendingOwner() != sender) {
            revert OwnableUnauthorizedAccount(sender);
        }
        _transferOwnership(sender);
    }
}

// SPDX-License-Identifier: MIT
// Remastered from OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {Address} from "./Address.sol";

library SafeERC20Remastered {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer_noRevert(IERC20 token, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.20;

import {IERC20Permit} from "./IERC20Permit.sol";
import {ERC20} from "./ERC20.sol";
import {ECDSA} from "./ECDSA.sol";
import {EIP712} from "./EIP712.sol";
import {Nonces} from "./Nonces.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712, Nonces {
    bytes32 private constant PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    /**
     * @dev Permit deadline has expired.
     */
    error ERC2612ExpiredSignature(uint256 deadline);

    /**
     * @dev Mismatched signature.
     */
    error ERC2612InvalidSigner(address signer, address owner);

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @inheritdoc IERC20Permit
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        if (block.timestamp > deadline) {
            revert ERC2612ExpiredSignature(deadline);
        }

        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        if (signer != owner) {
            revert ERC2612InvalidSigner(signer, owner);
        }

        _approve(owner, spender, value);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    function nonces(address owner) public view virtual override(IERC20Permit, Nonces) returns (uint256) {
        return super.nonces(owner);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view virtual returns (bytes32) {
        return _domainSeparatorV4();
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.19;

abstract contract Initializable {

    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        require(_initializing || !_initialized, "Initializable: contract is already initialized");

        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }

        _;

        if (isTopLevelCall) {
            _initializing = false;
        }
    }
}

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

pragma solidity >=0.5.0;

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}

pragma solidity >=0.6.2;

import './IUniswapV2Router01.sol';

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "./Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;

import {MessageHashUtils} from "./MessageHashUtils.sol";
import {ShortStrings, ShortString} from "./ShortStrings.sol";
import {IERC5267} from "./IERC5267.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _name which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Name() internal view returns (string memory) {
        return _name.toStringWithFallback(_nameFallback);
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _version which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Version() internal view returns (string memory) {
        return _version.toStringWithFallback(_versionFallback);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)
pragma solidity ^0.8.20;

/**
 * @dev Provides tracking nonces for addresses. Nonces will only increment.
 */
abstract contract Nonces {
    /**
     * @dev The nonce used for an `account` is not the expected current nonce.
     */
    error InvalidAccountNonce(address account, uint256 currentNonce);

    mapping(address account => uint256) private _nonces;

    /**
     * @dev Returns the next unused nonce for an address.
     */
    function nonces(address owner) public view virtual returns (uint256) {
        return _nonces[owner];
    }

    /**
     * @dev Consumes a nonce.
     *
     * Returns the current value and increments nonce.
     */
    function _useNonce(address owner) internal virtual returns (uint256) {
        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be
        // decremented or reset. This guarantees that the nonce never overflows.
        unchecked {
            // It is important to do x++ and not ++x here.
            return _nonces[owner]++;
        }
    }

    /**
     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.
     */
    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {
        uint256 current = _useNonce(owner);
        if (nonce != current) {
            revert InvalidAccountNonce(owner, current);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

import {Strings} from "./Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ShortStrings.sol)

pragma solidity ^0.8.20;

import {StorageSlot} from "./StorageSlot.sol";

// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;

/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;

    error StringTooLong(string str);
    error InvalidShortString();

    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }

    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }

    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }

    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(FALLBACK_SENTINEL);
        }
    }

    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }

    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using
     * {setWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.20;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./Math.sol";
import {SignedMath} from "./SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "cancun"
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"CannotDepositNativeCoins","type":"error"},{"inputs":[{"internalType":"uint16","name":"buyFee","type":"uint16"},{"internalType":"uint16","name":"sellFee","type":"uint16"},{"internalType":"uint16","name":"transferFee","type":"uint16"}],"name":"CannotExceedMaxTotalFee","type":"error"},{"inputs":[{"internalType":"uint256","name":"maxWalletAmount","type":"uint256"}],"name":"CannotExceedMaxWalletAmount","type":"error"},{"inputs":[],"name":"ECDSAInvalidSignature","type":"error"},{"inputs":[{"internalType":"uint256","name":"length","type":"uint256"}],"name":"ECDSAInvalidSignatureLength","type":"error"},{"inputs":[{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"ECDSAInvalidSignatureS","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"ERC2612ExpiredSignature","type":"error"},{"inputs":[{"internalType":"address","name":"signer","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"ERC2612InvalidSigner","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[{"internalType":"address","name":"AMM","type":"address"}],"name":"InvalidAMM","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"currentNonce","type":"uint256"}],"name":"InvalidAccountNonce","type":"error"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"maxAmount","type":"uint256"}],"name":"InvalidAmountToRecover","type":"error"},{"inputs":[],"name":"InvalidShortString","type":"error"},{"inputs":[{"internalType":"uint16","name":"swapThresholdRatio","type":"uint16"}],"name":"InvalidSwapThresholdRatio","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"InvalidTaxRecipientAddress","type":"error"},{"inputs":[{"internalType":"address","name":"tokenAddress","type":"address"}],"name":"InvalidToken","type":"error"},{"inputs":[{"internalType":"uint256","name":"maxWalletAmount","type":"uint256"},{"internalType":"uint256","name":"limit","type":"uint256"}],"name":"MaxWalletAmountTooLow","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[{"internalType":"string","name":"str","type":"string"}],"name":"StringTooLong","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"AMM","type":"address"},{"indexed":false,"internalType":"bool","name":"isAMM","type":"bool"}],"name":"AMMUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"bool","name":"isExcluded","type":"bool"}],"name":"ExcludeFromFees","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"bool","name":"isExcluded","type":"bool"}],"name":"ExcludeFromLimits","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"maxWalletAmount","type":"uint256"}],"name":"MaxWalletAmountUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferStarted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"routerV2","type":"address"}],"name":"RouterV2Updated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint16","name":"swapThresholdRatio","type":"uint16"}],"name":"SwapThresholdUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint8","name":"id","type":"uint8"},{"indexed":false,"internalType":"address","name":"newAddress","type":"address"}],"name":"WalletTaxAddressUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint8","name":"id","type":"uint8"},{"indexed":false,"internalType":"uint16","name":"buyFee","type":"uint16"},{"indexed":false,"internalType":"uint16","name":"sellFee","type":"uint16"},{"indexed":false,"internalType":"uint16","name":"transferFee","type":"uint16"}],"name":"WalletTaxFeesUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint8","name":"id","type":"uint8"},{"indexed":false,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"WalletTaxSent","type":"event"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"AMMs","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_router","type":"address"}],"name":"afterConstructor","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"value","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bool","name":"isExcluded","type":"bool"}],"name":"excludeFromFees","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bool","name":"isExcluded","type":"bool"}],"name":"excludeFromLimits","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getAllPending","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getSwapThresholdAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"isExcludedFromFees","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"isExcludedFromLimits","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"launchAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_newAddress","type":"address"}],"name":"launchAddressSetup","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"launchFees","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint16","name":"_buyFee","type":"uint16"},{"internalType":"uint16","name":"_sellFee","type":"uint16"},{"internalType":"uint16","name":"_transferFee","type":"uint16"}],"name":"launchFeesSetup","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"maxWalletAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pairV2","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"tokenAddress","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"recoverForeignERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"recoverToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"routerV2","outputs":[{"internalType":"contract IUniswapV2Router02","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"AMM","type":"address"},{"internalType":"bool","name":"isAMM","type":"bool"}],"name":"setAMM","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"swapThresholdRatio","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"totalFees","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_maxWalletAmount","type":"uint256"}],"name":"updateMaxWalletAmount","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint16","name":"_swapThresholdRatio","type":"uint16"}],"name":"updateSwapThreshold","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

0x60806040526004361061024c575f3560e01c806379cc679011610134578063c0a904a2116100b3578063d947752611610078578063d947752614610743578063dd62ed3e14610757578063e30c39781461079b578063e73b17d0146107b8578063f112ba72146107d7578063f2fde38b146107eb575f80fd5b8063c0a904a2146106a8578063c18bc195146106c7578063c457230a146106e6578063cb1a233d14610705578063d505accf14610724575f80fd5b806395d89b41116100f957806395d89b4114610622578063a9059cbb14610636578063a9d3cd8a14610655578063aa4bde2814610674578063c024666814610689575f80fd5b806379cc6790146105815780637ecebe00146105a057806384b0196e146105bf5780638da5cb5b146105e65780638fffabed14610603575f80fd5b806331e0dcc0116101cb5780634fbee193116101905780634fbee1931461048d578063502f7446146104bb5780635cce86cd146104f757806370a0823114610525578063715018a61461055957806379ba50971461056d575f80fd5b806331e0dcc0146103e95780633644e5151461041b578063408ccbdf1461042f57806342966c681461044e5780634f011b831461046d575f80fd5b80631a0e718c116102115780631a0e718c146103435780631e9fe6c61461036257806323b872dd14610390578063282a5d1e146103af578063313ce567146103ce575f80fd5b8063045239111461028e57806306fdde03146102ad578063095ea7b3146102d757806318160ddd1461030657806318533a0d14610324575f80fd5b3661028a5760105461010090046001600160a01b031633146102885760405163ba6875cd60e01b81523360048201526024015b60405180910390fd5b005b5f80fd5b348015610299575f80fd5b506102886102a8366004612598565b61080a565b3480156102b8575f80fd5b506102c16109d9565b6040516102ce9190612606565b60405180910390f35b3480156102e2575f80fd5b506102f66102f136600461262c565b610a69565b60405190151581526020016102ce565b348015610311575f80fd5b506002545b6040519081526020016102ce565b34801561032f575f80fd5b5061028861033e366004612656565b610a82565b34801561034e575f80fd5b5061028861035d366004612671565b610b3f565b34801561036d575f80fd5b506102f661037c366004612656565b60126020525f908152604090205460ff1681565b34801561039b575f80fd5b506102f66103aa36600461268a565b610bd6565b3480156103ba575f80fd5b506102886103c9366004612656565b610bfb565b3480156103d9575f80fd5b50604051601281526020016102ce565b3480156103f4575f80fd5b506104086104033660046126c8565b610c9f565b60405161ffff90911681526020016102ce565b348015610426575f80fd5b50610316610ccc565b34801561043a575f80fd5b506104086104493660046126c8565b610cda565b348015610459575f80fd5b506102886104683660046126c8565b610ce9565b348015610478575f80fd5b50600a546104089062010000900461ffff1681565b348015610498575f80fd5b506102f66104a7366004612656565b600e6020525f908152604090205460ff1681565b3480156104c6575f80fd5b506010546104df9061010090046001600160a01b031681565b6040516001600160a01b0390911681526020016102ce565b348015610502575f80fd5b506102f6610511366004612656565b60136020525f908152604090205460ff1681565b348015610530575f80fd5b5061031661053f366004612656565b6001600160a01b03165f9081526020819052604090205490565b348015610564575f80fd5b50610288610cf6565b348015610578575f80fd5b50610288610d09565b34801561058c575f80fd5b5061028861059b36600461262c565b610d4a565b3480156105ab575f80fd5b506103166105ba366004612656565b610d5f565b3480156105ca575f80fd5b506105d3610d7c565b6040516102ce97969594939291906126df565b3480156105f1575f80fd5b506005546001600160a01b03166104df565b34801561060e575f80fd5b506011546104df906001600160a01b031681565b34801561062d575f80fd5b506102c1610dbe565b348015610641575f80fd5b506102f661065036600461262c565b610dcd565b348015610660575f80fd5b5061028861066f366004612783565b610dda565b34801561067f575f80fd5b5061031660145481565b348015610694575f80fd5b506102886106a3366004612783565b610e43565b3480156106b3575f80fd5b506102886106c2366004612783565b610eaa565b3480156106d2575f80fd5b506102886106e13660046126c8565b610ebc565b3480156106f1575f80fd5b50600c546104df906001600160a01b031681565b348015610710575f80fd5b5061028861071f3660046126c8565b610f33565b34801561072f575f80fd5b5061028861073e3660046127ba565b610f95565b34801561074e575f80fd5b506103166110cb565b348015610762575f80fd5b5061031661077136600461282b565b6001600160a01b039182165f90815260016020908152604080832093909416825291909152205490565b3480156107a6575f80fd5b506006546001600160a01b03166104df565b3480156107c3575f80fd5b506102886107d236600461262c565b61110c565b3480156107e2575f80fd5b5061031661115c565b3480156107f6575f80fd5b50610288610805366004612656565b61116b565b6108126111dc565b600d54600f54849161082b9161ffff918216911661287f565b61083591906128a1565b600f805461ffff191661ffff9283161790819055600d54849261086592620100009283900482169290041661287f565b61086f91906128a1565b600f805463ffff000019166201000061ffff938416021790819055600d5483926108a8926401000000009283900482169290041661287f565b6108b291906128a1565b600f805461ffff9283166401000000000265ffff0000000019821681179092556109c4908316919092161711806108f75750600f546109c46201000090910461ffff16115b806109125750600f546109c464010000000090910461ffff16115b1561095857600f5460405163b7b3de6f60e01b815261ffff808316600483015262010000830481166024830152640100000000909204909116604482015260640161027f565b6040805160608101825261ffff8086168252848116602083015283169181019190915261098990600d9060036124d9565b506040805161ffff8581168252848116602083015283168183015290516001917f5aa2b88de73e9b93e574fbaf914e53e45e2ba25f25692e6e0ba4e0d3c33f9d5a919081900360600190a2505050565b6060600380546109e8906128bc565b80601f0160208091040260200160405190810160405280929190818152602001828054610a14906128bc565b8015610a5f5780601f10610a3657610100808354040283529160200191610a5f565b820191905f5260205f20905b815481529060010190602001808311610a4257829003601f168201915b5050505050905090565b5f33610a76818585611209565b60019150505b92915050565b600a54610100900460ff1680610a9b5750600a5460ff16155b610afe5760405162461bcd60e51b815260206004820152602e60248201527f496e697469616c697a61626c653a20636f6e747261637420697320616c72656160448201526d191e481a5b9a5d1a585b1a5e995960921b606482015260840161027f565b600a54610100900460ff16158015610b2057600a805461ffff19166101011790555b610b298261121b565b8015610b3b57600a805461ff00191690555b5050565b610b476111dc565b61ffff81161580610b5d57506101f48161ffff16115b15610b8157604051631958d05f60e01b815261ffff8216600482015260240161027f565b600a805463ffff000019166201000061ffff8416908102919091179091556040519081527fcf1366790fe21e66c9df9dcf67218b1e10acd64d3c99ae8a7429a68de91f1720906020015b60405180910390a150565b5f33610be3858285611421565b610bee85858561149c565b60019150505b9392505050565b610c036111dc565b6001600160a01b038116610c2c5760405163ab11818760e01b81525f600482015260240161027f565b600c80546001600160a01b0319166001600160a01b038316179055610c52816001610e43565b610c5d8160016114f9565b6040516001600160a01b03821681526001907ff8e79c3705e6b93e151f4c2166fe019e81a78204037fb9913b261eeb877218d99060200160405180910390a250565b600d8160038110610cae575f80fd5b60109182820401919006600202915054906101000a900461ffff1681565b5f610cd5611550565b905090565b600f8160038110610cae575f80fd5b610cf33382611679565b50565b610cfe6111dc565b610d075f6116ad565b565b60065433906001600160a01b03168114610d415760405163118cdaa760e01b81526001600160a01b038216600482015260240161027f565b610cf3816116ad565b610d55823383611421565b610b3b8282611679565b6001600160a01b0381165f90815260096020526040812054610a7c565b5f6060805f805f6060610d8d6116c6565b610d956116f3565b604080515f80825260208201909252600f60f81b9b939a50919850469750309650945092509050565b6060600480546109e8906128bc565b5f33610a7681858561149c565b610de26111dc565b6011546001600160a01b0383811691161480610e1057506010546001600160a01b0383811661010090920416145b15610e395760405163435eaf7b60e11b81526001600160a01b038316600482015260240161027f565b610b3b8282611720565b610e4b6111dc565b6001600160a01b0382165f818152600e6020908152604091829020805460ff191685151590811790915591519182527f9d8f7706ea1113d1a167b526eca956215946dd36cc7df39eb16180222d8b5df791015b60405180910390a25050565b610eb26111dc565b610b3b82826114f9565b610ec46111dc565b610ecc611794565b811015610efe5780610edc611794565b604051630c24444f60e11b81526004810192909252602482015260440161027f565b60148190556040518181527f4b39c36d20c57d220f61fd25c4349d4435cc03ef6c2a680942f15333c3c3e00190602001610bcb565b610f3b6111dc565b5f610f4461115c565b305f90815260208190526040902054610f5d91906128f4565b905080821115610f8a57604051634d2e924b60e01b8152600481018390526024810182905260440161027f565b610b3b3033846117a1565b83421115610fb95760405163313c898160e11b81526004810185905260240161027f565b5f7f6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c98888886110048c6001600160a01b03165f90815260096020526040902080546001810190915590565b6040805160208101969096526001600160a01b0394851690860152929091166060840152608083015260a082015260c0810186905260e0016040516020818303038152906040528051906020012090505f61105e82611bf6565b90505f61106d82878787611c22565b9050896001600160a01b0316816001600160a01b0316146110b4576040516325c0072360e11b81526001600160a01b0380831660048301528b16602482015260440161027f565b6110bf8a8a8a611209565b50505050505050505050565b600a546011546001600160a01b03165f908152602081905260408120549091612710916111029162010000900461ffff1690612907565b610cd5919061291e565b6111146111dc565b306001600160a01b038316036111485760405163961c9a4f60e01b81526001600160a01b038316600482015260240161027f565b610b3b6001600160a01b0383163383611c4e565b5f600b545f610cd5919061293d565b6111736111dc565b600680546001600160a01b0383166001600160a01b031990911681179091556111a46005546001600160a01b031690565b6001600160a01b03167f38d16b8cac22d99fc7c124b9cd0de2d3fa1faef420bfe791d8c362d765e2270060405160405180910390a350565b6005546001600160a01b03163314610d075760405163118cdaa760e01b815233600482015260240161027f565b6112168383836001611ca0565b505050565b80601060016101000a8154816001600160a01b0302191690836001600160a01b03160217905550601060019054906101000a90046001600160a01b03166001600160a01b031663c45a01556040518163ffffffff1660e01b8152600401602060405180830381865afa158015611293573d5f803e3d5ffd5b505050506040513d601f19601f820116820180604052508101906112b79190612950565b6001600160a01b031663c9c6539630601060019054906101000a90046001600160a01b03166001600160a01b031663ad5c46486040518163ffffffff1660e01b8152600401602060405180830381865afa158015611317573d5f803e3d5ffd5b505050506040513d601f19601f8201168201806040525081019061133b9190612950565b6040516001600160e01b031960e085901b1681526001600160a01b039283166004820152911660248201526044016020604051808303815f875af1158015611385573d5f803e3d5ffd5b505050506040513d601f19601f820116820180604052508101906113a99190612950565b601180546001600160a01b0319166001600160a01b03929092169190911790556113d4816001611720565b6011546113eb906001600160a01b03166001611720565b6040516001600160a01b038216907fbc052db65df144ad4f71f02da93cae3d4401104c30ac374d7cc10d87ee07b602905f90a250565b6001600160a01b038381165f908152600160209081526040808320938616835292905220545f198114611496578181101561148857604051637dc7a0d960e11b81526001600160a01b0384166004820152602481018290526044810183905260640161027f565b61149684848484035f611ca0565b50505050565b6001600160a01b0383166114c557604051634b637e8f60e11b81525f600482015260240161027f565b6001600160a01b0382166114ee5760405163ec442f0560e01b81525f600482015260240161027f565b6112168383836117a1565b6001600160a01b0382165f81815260136020908152604091829020805460ff191685151590811790915591519182527f4b89c347592b1d537e066cb4ed98d87696ae35164745d7e370e4add16941dc929101610e9e565b5f306001600160a01b037f000000000000000000000000036cd97752bfcf18f9201fc8e7a50f11ce54e0b3161480156115a857507f000000000000000000000000000000000000000000000000000000000000000146145b156115d257507fb23a24f515a35667c364ecd6f65e0a46708a8d22fbd0be9abf575c084e44d51490565b610cd5604080517f8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f60208201527f73060c368691182bc95eec003b0bcd2d45454cbfe5c9d9eeecbb123bf1234f48918101919091527fc89efdaa54c0f20c7adf612882df0950f5a951637e0307cdcb4c672f298b8bc660608201524660808201523060a08201525f9060c00160405160208183030381529060405280519060200120905090565b6001600160a01b0382166116a257604051634b637e8f60e11b81525f600482015260240161027f565b610b3b825f836117a1565b600680546001600160a01b0319169055610cf381611d72565b6060610cd57f446f6e74000000000000000000000000000000000000000000000000000000046007611dc3565b6060610cd57f31000000000000000000000000000000000000000000000000000000000000016008611dc3565b6001600160a01b0382165f908152601260205260409020805460ff19168215801591909117909155611757576117578260016114f9565b816001600160a01b03167f2cc8631dda80fe178488d3174721fafacf84b0f194a7eddae85c9bcc599ac78b82604051610e9e911515815260200190565b5f6103e861110260025490565b6001600160a01b038316158015906117c157506001600160a01b03821615155b15611be05760105460ff161580156117d857505f81115b80156117fc57506001600160a01b0383165f908152600e602052604090205460ff16155b801561182057506001600160a01b0382165f908152600e602052604090205460ff16155b15611a48576001600160a01b0383165f9081526012602052604081205460039060ff16801561186757506001600160a01b0384165f9081526012602052604090205460ff16155b1561188057600f5461ffff161561187b57505f5b61193b565b6001600160a01b0384165f9081526012602052604090205460ff1680156118bf57506001600160a01b0385165f9081526012602052604090205460ff16155b156118de57600f5462010000900461ffff161561187b5750600161193b565b6001600160a01b0385165f9081526012602052604090205460ff1615801561191e57506001600160a01b0384165f9081526012602052604090205460ff16155b1561193b57600f54640100000000900461ffff161561193b575060025b60038160ff161015611a3457612710600f8260ff166003811061196057611960612857565b601091828204019190066002029054906101000a900461ffff1661ffff16846119899190612907565b611993919061291e565b915061199f82846128f4565b9250600f8160ff16600381106119b7576119b7612857565b601091828204019190066002029054906101000a900461ffff1661ffff16600d8260ff16600381106119eb576119eb612857565b601091828204019190066002029054906101000a900461ffff1661ffff1683611a149190612907565b611a1e919061291e565b600b5f828254611a2e919061293d565b90915550505b8115611a4557611a45853084611e6c565b50505b5f611a516110cb565b611a5961115c565b10158015611a7e57506011546001600160a01b03165f90815260208190526040812054115b60105490915060ff16158015611aa257506011546001600160a01b03858116911614155b8015611ac157506010546001600160a01b038581166101009092041614155b8015611aca5750805b15611bde576010805460ff191660011790555f600b541115611bd3575f600b545f611af5919061293d565b90505f611b0182611f92565b600b5447905f908490611b149084612907565b611b1e919061291e565b90508015611bca57600c546040516001600160a01b039091169082905f81818185875af1925050503d805f8114611b70576040519150601f19603f3d011682016040523d82523d5f602084013e611b75565b606091505b50909350508215611bca57600c54604080516001600160a01b039092168252602082018390526001917f4b1a0df20e469b24231f59741640137b104320272da39777bdf2800ac99de1e0910160405180910390a25b50505f600b5550505b6010805460ff191690555b505b611beb838383611e6c565b611216838383612105565b5f610a7c611c02611550565b8360405161190160f01b8152600281019290925260228201526042902090565b5f805f80611c3288888888612169565b925092509250611c428282612231565b50909695505050505050565b604080516001600160a01b038416602482015260448082018490528251808303909101815260649091019091526020810180516001600160e01b031663a9059cbb60e01b1790526112169084906122e9565b6001600160a01b038416611cc95760405163e602df0560e01b81525f600482015260240161027f565b6001600160a01b038316611cf257604051634a1406b160e11b81525f600482015260240161027f565b6001600160a01b038085165f908152600160209081526040808320938716835292905220829055801561149657826001600160a01b0316846001600160a01b03167f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b92584604051611d6491815260200190565b60405180910390a350505050565b600580546001600160a01b038381166001600160a01b0319831681179093556040519116919082907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0905f90a35050565b606060ff8314611ddd57611dd68361234a565b9050610a7c565b818054611de9906128bc565b80601f0160208091040260200160405190810160405280929190818152602001828054611e15906128bc565b8015611e605780601f10611e3757610100808354040283529160200191611e60565b820191905f5260205f20905b815481529060010190602001808311611e4357829003601f168201915b50505050509050610a7c565b6001600160a01b038316611e96578060025f828254611e8b919061293d565b90915550611f069050565b6001600160a01b0383165f9081526020819052604090205481811015611ee85760405163391434e360e21b81526001600160a01b0385166004820152602481018290526044810183905260640161027f565b6001600160a01b0384165f9081526020819052604090209082900390555b6001600160a01b038216611f2257600280548290039055611f40565b6001600160a01b0382165f9081526020819052604090208054820190555b816001600160a01b0316836001600160a01b03167fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef83604051611f8591815260200190565b60405180910390a3505050565b6040805160028082526060820183525f9260208301908036833701905050905030815f81518110611fc557611fc5612857565b60200260200101906001600160a01b031690816001600160a01b031681525050601060019054906101000a90046001600160a01b03166001600160a01b031663ad5c46486040518163ffffffff1660e01b8152600401602060405180830381865afa158015612036573d5f803e3d5ffd5b505050506040513d601f19601f8201168201806040525081019061205a9190612950565b8160018151811061206d5761206d612857565b6001600160a01b03928316602091820292909201015260105461209891309161010090041684611209565b60105460405163791ac94760e01b81526101009091046001600160a01b03169063791ac947906120d49085905f9086903090429060040161296b565b5f604051808303815f87803b1580156120eb575f80fd5b505af11580156120fd573d5f803e3d5ffd5b505050505050565b6001600160a01b0382165f9081526013602052604090205460ff1615801561214557506014546001600160a01b0383165f90815260208190526040902054115b1561121657601454604051638669bb7160e01b815260040161027f91815260200190565b5f80807f7fffffffffffffffffffffffffffffff5d576e7357a4501ddfe92f46681b20a08411156121a257505f91506003905082612227565b604080515f808252602082018084528a905260ff891692820192909252606081018790526080810186905260019060a0016020604051602081039080840390855afa1580156121f3573d5f803e3d5ffd5b5050604051601f1901519150506001600160a01b03811661221e57505f925060019150829050612227565b92505f91508190505b9450945094915050565b5f826003811115612244576122446129dc565b0361224d575050565b6001826003811115612261576122616129dc565b0361227f5760405163f645eedf60e01b815260040160405180910390fd5b6002826003811115612293576122936129dc565b036122b45760405163fce698f760e01b81526004810182905260240161027f565b60038260038111156122c8576122c86129dc565b03610b3b576040516335e2f38360e21b81526004810182905260240161027f565b5f6122fd6001600160a01b03841683612387565b905080515f1415801561232157508080602001905181019061231f91906129f0565b155b1561121657604051635274afe760e01b81526001600160a01b038416600482015260240161027f565b60605f61235683612394565b6040805160208082528183019092529192505f91906020820181803683375050509182525060208101929092525090565b6060610bf483835f6123bb565b5f60ff8216601f811115610a7c57604051632cd44ac360e21b815260040160405180910390fd5b6060814710156123e05760405163cd78605960e01b815230600482015260240161027f565b5f80856001600160a01b031684866040516123fb9190612a0b565b5f6040518083038185875af1925050503d805f8114612435576040519150601f19603f3d011682016040523d82523d5f602084013e61243a565b606091505b509150915061244a868383612454565b9695505050505050565b60608261246957612464826124b0565b610bf4565b815115801561248057506001600160a01b0384163b155b156124a957604051639996b31560e01b81526001600160a01b038516600482015260240161027f565b5080610bf4565b8051156124c05780518082602001fd5b604051630a12f52160e11b815260040160405180910390fd5b60018301918390821561255e579160200282015f5b8382111561252e57835183826101000a81548161ffff021916908361ffff16021790555092602001926002016020816001010492830192600103026124ee565b801561255c5782816101000a81549061ffff021916905560020160208160010104928301926001030261252e565b505b5061256a92915061256e565b5090565b5b8082111561256a575f815560010161256f565b803561ffff81168114612593575f80fd5b919050565b5f805f606084860312156125aa575f80fd5b6125b384612582565b92506125c160208501612582565b91506125cf60408501612582565b90509250925092565b5f81518084528060208401602086015e5f602082860101526020601f19601f83011685010191505092915050565b602081525f610bf460208301846125d8565b6001600160a01b0381168114610cf3575f80fd5b5f806040838503121561263d575f80fd5b823561264881612618565b946020939093013593505050565b5f60208284031215612666575f80fd5b8135610bf481612618565b5f60208284031215612681575f80fd5b610bf482612582565b5f805f6060848603121561269c575f80fd5b83356126a781612618565b925060208401356126b781612618565b929592945050506040919091013590565b5f602082840312156126d8575f80fd5b5035919050565b60ff60f81b881681525f602060e060208401526126ff60e084018a6125d8565b8381036040850152612711818a6125d8565b606085018990526001600160a01b038816608086015260a0850187905284810360c0860152855180825260208088019350909101905f5b8181101561276457835183529284019291840191600101612748565b50909c9b505050505050505050505050565b8015158114610cf3575f80fd5b5f8060408385031215612794575f80fd5b823561279f81612618565b915060208301356127af81612776565b809150509250929050565b5f805f805f805f60e0888a0312156127d0575f80fd5b87356127db81612618565b965060208801356127eb81612618565b95506040880135945060608801359350608088013560ff8116811461280e575f80fd5b9699959850939692959460a0840135945060c09093013592915050565b5f806040838503121561283c575f80fd5b823561284781612618565b915060208301356127af81612618565b634e487b7160e01b5f52603260045260245ffd5b634e487b7160e01b5f52601160045260245ffd5b61ffff82811682821603908082111561289a5761289a61286b565b5092915050565b61ffff81811683821601908082111561289a5761289a61286b565b600181811c908216806128d057607f821691505b6020821081036128ee57634e487b7160e01b5f52602260045260245ffd5b50919050565b81810381811115610a7c57610a7c61286b565b8082028115828204841417610a7c57610a7c61286b565b5f8261293857634e487b7160e01b5f52601260045260245ffd5b500490565b80820180821115610a7c57610a7c61286b565b5f60208284031215612960575f80fd5b8151610bf481612618565b5f60a08201878352602087602085015260a0604085015281875180845260c0860191506020890193505f5b818110156129bb5784516001600160a01b031683529383019391830191600101612996565b50506001600160a01b03969096166060850152505050608001529392505050565b634e487b7160e01b5f52602160045260245ffd5b5f60208284031215612a00575f80fd5b8151610bf481612776565b5f82518060208501845e5f92019182525091905056fea2646970667358221220f3c75137c390f970b622df7196cf3af92fe77d515a0cd9d6d1e411555a76d9eb64736f6c63430008190033