Contract 0xa2791BdF2D5055Cda4d46EC17f9F429568275047 2

/**
 *Submitted for verification at Etherscan.io on 2020-09-21
*/

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

contract ERC20Minter is Context, ERC20 {
    address public current_minter = address(0);

    modifier onlyMinter() {
        require(current_minter == _msgSender(), "onlyMinter: caller is not the minter");
        _;
    }

    constructor(string memory name, string memory symbol, uint8 decimals, address minter) public ERC20(name, symbol) {
        require(minter != address(0), "ERROR: Zero address");
        _setupDecimals(decimals);
        current_minter = minter;
    }

    function mint(address to, uint256 amount) external onlyMinter {
        _mint(to, amount);
    }

    function burn(uint256 amount) external onlyMinter {
        _burn(_msgSender(), amount);
    }

    function replaceMinter(address newMinter) external onlyMinter {
        current_minter = newMinter;
    }

    function _transfer(address sender, address recipient, uint256 amount) internal virtual override(ERC20) {
        super._transfer(sender, recipient, amount);
        if (_msgSender() != current_minter && recipient == current_minter) {
            _burn(recipient, amount);
        }
    }

    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override(ERC20) {
        super._beforeTokenTransfer(from, to, amount);
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"symbol","type":"string"},{"internalType":"uint8","name":"decimals","type":"uint8"},{"internalType":"address","name":"minter","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"current_minter","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newMinter","type":"address"}],"name":"replaceMinter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

608060405260058054610100600160a81b03191690553480156200002257600080fd5b506040516200128d3803806200128d833981810160405260808110156200004857600080fd5b81019080805160405193929190846401000000008211156200006957600080fd5b9083019060208201858111156200007f57600080fd5b82516401000000008111828201881017156200009a57600080fd5b82525081516020918201929091019080838360005b83811015620000c9578181015183820152602001620000af565b50505050905090810190601f168015620000f75780820380516001836020036101000a031916815260200191505b50604052602001805160405193929190846401000000008211156200011b57600080fd5b9083019060208201858111156200013157600080fd5b82516401000000008111828201881017156200014c57600080fd5b82525081516020918201929091019080838360005b838110156200017b57818101518382015260200162000161565b50505050905090810190601f168015620001a95780820380516001836020036101000a031916815260200191505b50604090815260208281015192909101518651929450925085918591620001d691600391850190620002a9565b508051620001ec906004906020840190620002a9565b50506005805460ff19166012179055506001600160a01b03811662000258576040805162461bcd60e51b815260206004820152601360248201527f4552524f523a205a65726f206164647265737300000000000000000000000000604482015290519081900360640190fd5b620002638262000293565b600580546001600160a01b0390921661010002610100600160a81b03199092169190911790555062000345915050565b6005805460ff191660ff92909216919091179055565b828054600181600116156101000203166002900490600052602060002090601f016020900481019282601f10620002ec57805160ff19168380011785556200031c565b828001600101855582156200031c579182015b828111156200031c578251825591602001919060010190620002ff565b506200032a9291506200032e565b5090565b5b808211156200032a57600081556001016200032f565b610f3880620003556000396000f3fe608060405234801561001057600080fd5b50600436106100f55760003560e01c8063395093511161009757806395d89b411161006657806395d89b411461030c578063a457c2d714610314578063a9059cbb14610340578063dd62ed3e1461036c576100f5565b8063395093511461027157806340c10f191461029d57806342966c68146102c957806370a08231146102e6576100f5565b806318160ddd116100d357806318160ddd146101df57806323b872dd146101f95780632e5ed9551461022f578063313ce56714610253576100f5565b806306fdde03146100fa57806307f1af4414610177578063095ea7b31461019f575b600080fd5b61010261039a565b6040805160208082528351818301528351919283929083019185019080838360005b8381101561013c578181015183820152602001610124565b50505050905090810190601f1680156101695780820380516001836020036101000a031916815260200191505b509250505060405180910390f35b61019d6004803603602081101561018d57600080fd5b50356001600160a01b0316610430565b005b6101cb600480360360408110156101b557600080fd5b506001600160a01b0381351690602001356104b1565b604080519115158252519081900360200190f35b6101e76104ce565b60408051918252519081900360200190f35b6101cb6004803603606081101561020f57600080fd5b506001600160a01b038135811691602081013590911690604001356104d4565b61023761055b565b604080516001600160a01b039092168252519081900360200190f35b61025b61056f565b6040805160ff9092168252519081900360200190f35b6101cb6004803603604081101561028757600080fd5b506001600160a01b038135169060200135610578565b61019d600480360360408110156102b357600080fd5b506001600160a01b0381351690602001356105c6565b61019d600480360360208110156102df57600080fd5b503561062d565b6101e7600480360360208110156102fc57600080fd5b50356001600160a01b031661069a565b6101026106b5565b6101cb6004803603604081101561032a57600080fd5b506001600160a01b038135169060200135610716565b6101cb6004803603604081101561035657600080fd5b506001600160a01b03813516906020013561077e565b6101e76004803603604081101561038257600080fd5b506001600160a01b0381358116916020013516610792565b60038054604080516020601f60026000196101006001881615020190951694909404938401819004810282018101909252828152606093909290918301828280156104265780601f106103fb57610100808354040283529160200191610426565b820191906000526020600020905b81548152906001019060200180831161040957829003601f168201915b5050505050905090565b6104386107bd565b60055461010090046001600160a01b039081169116146104895760405162461bcd60e51b8152600401808060200182810382526024815260200180610e506024913960400191505060405180910390fd5b600580546001600160a01b0390921661010002610100600160a81b0319909216919091179055565b60006104c56104be6107bd565b84846107c1565b50600192915050565b60025490565b60006104e18484846108ad565b610551846104ed6107bd565b61054c85604051806060016040528060288152602001610e28602891396001600160a01b038a1660009081526001602052604081209061052b6107bd565b6001600160a01b03168152602081019190915260400160002054919061090e565b6107c1565b5060019392505050565b60055461010090046001600160a01b031681565b60055460ff1690565b60006104c56105856107bd565b8461054c85600160006105966107bd565b6001600160a01b03908116825260208083019390935260409182016000908120918c1681529252902054906109a5565b6105ce6107bd565b60055461010090046001600160a01b0390811691161461061f5760405162461bcd60e51b8152600401808060200182810382526024815260200180610e506024913960400191505060405180910390fd5b6106298282610a06565b5050565b6106356107bd565b60055461010090046001600160a01b039081169116146106865760405162461bcd60e51b8152600401808060200182810382526024815260200180610e506024913960400191505060405180910390fd5b6106976106916107bd565b82610af6565b50565b6001600160a01b031660009081526020819052604090205490565b60048054604080516020601f60026000196101006001881615020190951694909404938401819004810282018101909252828152606093909290918301828280156104265780601f106103fb57610100808354040283529160200191610426565b60006104c56107236107bd565b8461054c85604051806060016040528060258152602001610ede602591396001600061074d6107bd565b6001600160a01b03908116825260208083019390935260409182016000908120918d1681529252902054919061090e565b60006104c561078b6107bd565b84846108ad565b6001600160a01b03918216600090815260016020908152604080832093909416825291909152205490565b3390565b6001600160a01b0383166108065760405162461bcd60e51b8152600401808060200182810382526024815260200180610eba6024913960400191505060405180910390fd5b6001600160a01b03821661084b5760405162461bcd60e51b8152600401808060200182810382526022815260200180610de06022913960400191505060405180910390fd5b6001600160a01b03808416600081815260016020908152604080832094871680845294825291829020859055815185815291517f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b9259281900390910190a3505050565b6108b8838383610bf2565b60055461010090046001600160a01b03166108d16107bd565b6001600160a01b0316141580156108fa57506005546001600160a01b0383811661010090920416145b15610909576109098282610af6565b505050565b6000818484111561099d5760405162461bcd60e51b81526004018080602001828103825283818151815260200191508051906020019080838360005b8381101561096257818101518382015260200161094a565b50505050905090810190601f16801561098f5780820380516001836020036101000a031916815260200191505b509250505060405180910390fd5b505050900390565b6000828201838110156109ff576040805162461bcd60e51b815260206004820152601b60248201527f536166654d6174683a206164646974696f6e206f766572666c6f770000000000604482015290519081900360640190fd5b9392505050565b6001600160a01b038216610a61576040805162461bcd60e51b815260206004820152601f60248201527f45524332303a206d696e7420746f20746865207a65726f206164647265737300604482015290519081900360640190fd5b610a6d60008383610d4d565b600254610a7a90826109a5565b6002556001600160a01b038216600090815260208190526040902054610aa090826109a5565b6001600160a01b0383166000818152602081815260408083209490945583518581529351929391927fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9281900390910190a35050565b6001600160a01b038216610b3b5760405162461bcd60e51b8152600401808060200182810382526021815260200180610e746021913960400191505060405180910390fd5b610b4782600083610d4d565b610b8481604051806060016040528060228152602001610dbe602291396001600160a01b038516600090815260208190526040902054919061090e565b6001600160a01b038316600090815260208190526040902055600254610baa9082610d58565b6002556040805182815290516000916001600160a01b038516917fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9181900360200190a35050565b6001600160a01b038316610c375760405162461bcd60e51b8152600401808060200182810382526025815260200180610e956025913960400191505060405180910390fd5b6001600160a01b038216610c7c5760405162461bcd60e51b8152600401808060200182810382526023815260200180610d9b6023913960400191505060405180910390fd5b610c87838383610d4d565b610cc481604051806060016040528060268152602001610e02602691396001600160a01b038616600090815260208190526040902054919061090e565b6001600160a01b038085166000908152602081905260408082209390935590841681522054610cf390826109a5565b6001600160a01b038084166000818152602081815260409182902094909455805185815290519193928716927fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef92918290030190a3505050565b610909838383610909565b60006109ff83836040518060400160405280601e81526020017f536166654d6174683a207375627472616374696f6e206f766572666c6f77000081525061090e56fe45524332303a207472616e7366657220746f20746865207a65726f206164647265737345524332303a206275726e20616d6f756e7420657863656564732062616c616e636545524332303a20617070726f766520746f20746865207a65726f206164647265737345524332303a207472616e7366657220616d6f756e7420657863656564732062616c616e636545524332303a207472616e7366657220616d6f756e74206578636565647320616c6c6f77616e63656f6e6c794d696e7465723a2063616c6c6572206973206e6f7420746865206d696e74657245524332303a206275726e2066726f6d20746865207a65726f206164647265737345524332303a207472616e736665722066726f6d20746865207a65726f206164647265737345524332303a20617070726f76652066726f6d20746865207a65726f206164647265737345524332303a2064656372656173656420616c6c6f77616e63652062656c6f77207a65726fa264697066735822122079c550d8f9c2839a75f25142f7c8b8925638220353abc6448ec46f24ba8e6cc464736f6c634300060c0033000000000000000000000000000000000000000000000000000000000000008000000000000000000000000000000000000000000000000000000000000000c000000000000000000000000000000000000000000000000000000000000000080000000000000000000000006758d4c4734ac7811358395a8e0c3832ba6ac624000000000000000000000000000000000000000000000000000000000000000d4e65727665204e6574776f726b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000034e56540000000000000000000000000000000000000000000000000000000000

26043:1294:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17226:83;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;26751:107;;;;;;;;;;;;;;;;-1:-1:-1;26751:107:0;-1:-1:-1;;;;;26751:107:0;;:::i;:::-;;19332:169;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;19332:169:0;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;18301:100;;;:::i;:::-;;;;;;;;;;;;;;;;19975:321;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;19975:321:0;;;;;;;;;;;;;;;;;:::i;26089:42::-;;;:::i;:::-;;;;-1:-1:-1;;;;;26089:42:0;;;;;;;;;;;;;;18153:83;;;:::i;:::-;;;;;;;;;;;;;;;;;;;20705:218;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;20705:218:0;;;;;;;;:::i;26541:98::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;26541:98:0;;;;;;;;:::i;26647:96::-;;;;;;;;;;;;;;;;-1:-1:-1;26647:96:0;;:::i;18464:119::-;;;;;;;;;;;;;;;;-1:-1:-1;18464:119:0;-1:-1:-1;;;;;18464:119:0;;:::i;17428:87::-;;;:::i;21426:269::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;21426:269:0;;;;;;;;:::i;18796:175::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;18796:175:0;;;;;;;;:::i;19034:151::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;19034:151:0;;;;;;;;;;:::i;17226:83::-;17296:5;17289:12;;;;;;;;-1:-1:-1;;17289:12:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17263:13;;17289:12;;17296:5;;17289:12;;17296:5;17289:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17226:83;:::o;26751:107::-;26199:12;:10;:12::i;:::-;26181:14;;;;;-1:-1:-1;;;;;26181:14:0;;;:30;;;26173:79;;;;-1:-1:-1;;;26173:79:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;26824:14:::1;:26:::0;;-1:-1:-1;;;;;26824:26:0;;::::1;;;-1:-1:-1::0;;;;;;26824:26:0;;::::1;::::0;;;::::1;::::0;;26751:107::o;19332:169::-;19415:4;19432:39;19441:12;:10;:12::i;:::-;19455:7;19464:6;19432:8;:39::i;:::-;-1:-1:-1;19489:4:0;19332:169;;;;:::o;18301:100::-;18381:12;;18301:100;:::o;19975:321::-;20081:4;20098:36;20108:6;20116:9;20127:6;20098:9;:36::i;:::-;20145:121;20154:6;20162:12;:10;:12::i;:::-;20176:89;20214:6;20176:89;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;20176:19:0;;;;;;:11;:19;;;;;;20196:12;:10;:12::i;:::-;-1:-1:-1;;;;;20176:33:0;;;;;;;;;;;;-1:-1:-1;20176:33:0;;;:89;:37;:89::i;:::-;20145:8;:121::i;:::-;-1:-1:-1;20284:4:0;19975:321;;;;;:::o;26089:42::-;;;;;;-1:-1:-1;;;;;26089:42:0;;:::o;18153:83::-;18219:9;;;;18153:83;:::o;20705:218::-;20793:4;20810:83;20819:12;:10;:12::i;:::-;20833:7;20842:50;20881:10;20842:11;:25;20854:12;:10;:12::i;:::-;-1:-1:-1;;;;;20842:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;20842:25:0;;;:34;;;;;;;;;;;:38;:50::i;26541:98::-;26199:12;:10;:12::i;:::-;26181:14;;;;;-1:-1:-1;;;;;26181:14:0;;;:30;;;26173:79;;;;-1:-1:-1;;;26173:79:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;26614:17:::1;26620:2;26624:6;26614:5;:17::i;:::-;26541:98:::0;;:::o;26647:96::-;26199:12;:10;:12::i;:::-;26181:14;;;;;-1:-1:-1;;;;;26181:14:0;;;:30;;;26173:79;;;;-1:-1:-1;;;26173:79:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;26708:27:::1;26714:12;:10;:12::i;:::-;26728:6;26708:5;:27::i;:::-;26647:96:::0;:::o;18464:119::-;-1:-1:-1;;;;;18557:18:0;18530:7;18557:18;;;;;;;;;;;;18464:119::o;17428:87::-;17500:7;17493:14;;;;;;;;-1:-1:-1;;17493:14:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17467:13;;17493:14;;17500:7;;17493:14;;17500:7;17493:14;;;;;;;;;;;;;;;;;;;;;;;;21426:269;21519:4;21536:129;21545:12;:10;:12::i;:::-;21559:7;21568:96;21607:15;21568:96;;;;;;;;;;;;;;;;;:11;:25;21580:12;:10;:12::i;:::-;-1:-1:-1;;;;;21568:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;21568:25:0;;;:34;;;;;;;;;;;:96;:38;:96::i;18796:175::-;18882:4;18899:42;18909:12;:10;:12::i;:::-;18923:9;18934:6;18899:9;:42::i;19034:151::-;-1:-1:-1;;;;;19150:18:0;;;19123:7;19150:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;19034:151::o;605:106::-;693:10;605:106;:::o;24573:346::-;-1:-1:-1;;;;;24675:19:0;;24667:68;;;;-1:-1:-1;;;24667:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;24754:21:0;;24746:68;;;;-1:-1:-1;;;24746:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;24827:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;24879:32;;;;;;;;;;;;;;;;;24573:346;;;:::o;26866:292::-;26980:42;26996:6;27004:9;27015:6;26980:15;:42::i;:::-;27053:14;;;;;-1:-1:-1;;;;;27053:14:0;27037:12;:10;:12::i;:::-;-1:-1:-1;;;;;27037:30:0;;;:61;;;;-1:-1:-1;27084:14:0;;-1:-1:-1;;;;;27071:27:0;;;27084:14;;;;;27071:27;27037:61;27033:118;;;27115:24;27121:9;27132:6;27115:5;:24::i;:::-;26866:292;;;:::o;8863:192::-;8949:7;8985:12;8977:6;;;;8969:29;;;;-1:-1:-1;;;8969:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;9021:5:0;;;8863:192::o;7960:181::-;8018:7;8050:5;;;8074:6;;;;8066:46;;;;;-1:-1:-1;;;8066:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;8132:1;7960:181;-1:-1:-1;;;7960:181:0:o;23005:378::-;-1:-1:-1;;;;;23089:21:0;;23081:65;;;;;-1:-1:-1;;;23081:65:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;23159:49;23188:1;23192:7;23201:6;23159:20;:49::i;:::-;23236:12;;:24;;23253:6;23236:16;:24::i;:::-;23221:12;:39;-1:-1:-1;;;;;23292:18:0;;:9;:18;;;;;;;;;;;:30;;23315:6;23292:22;:30::i;:::-;-1:-1:-1;;;;;23271:18:0;;:9;:18;;;;;;;;;;;:51;;;;23338:37;;;;;;;23271:18;;:9;;23338:37;;;;;;;;;;23005:378;;:::o;23715:418::-;-1:-1:-1;;;;;23799:21:0;;23791:67;;;;-1:-1:-1;;;23791:67:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;23871:49;23892:7;23909:1;23913:6;23871:20;:49::i;:::-;23954:68;23977:6;23954:68;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;23954:18:0;;:9;:18;;;;;;;;;;;;:68;:22;:68::i;:::-;-1:-1:-1;;;;;23933:18:0;;:9;:18;;;;;;;;;;:89;24048:12;;:24;;24065:6;24048:16;:24::i;:::-;24033:12;:39;24088:37;;;;;;;;24114:1;;-1:-1:-1;;;;;24088:37:0;;;;;;;;;;;;23715:418;;:::o;22185:539::-;-1:-1:-1;;;;;22291:20:0;;22283:70;;;;-1:-1:-1;;;22283:70:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;22372:23:0;;22364:71;;;;-1:-1:-1;;;22364:71:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;22448:47;22469:6;22477:9;22488:6;22448:20;:47::i;:::-;22528:71;22550:6;22528:71;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;22528:17:0;;:9;:17;;;;;;;;;;;;:71;:21;:71::i;:::-;-1:-1:-1;;;;;22508:17:0;;;:9;:17;;;;;;;;;;;:91;;;;22633:20;;;;;;;:32;;22658:6;22633:24;:32::i;:::-;-1:-1:-1;;;;;22610:20:0;;;:9;:20;;;;;;;;;;;;:55;;;;22681:35;;;;;;;22610:20;;22681:35;;;;;;;;;;;;;22185:539;;;:::o;27166:168::-;27282:44;27309:4;27315:2;27319:6;27282:26;:44::i;8424:136::-;8482:7;8509:43;8513:1;8516;8509:43;;;;;;;;;;;;;;;;;:3;:43::i

ipfs://79c550d8f9c2839a75f25142f7c8b8925638220353abc6448ec46f24ba8e6cc4