Contract 0x7Fc66500c84A76Ad7e9c93437bFc5Ac33E2DDaE9 8

 
Ad
Ad
Txn Hash Method
Block
From
To
Value
0x3ed2d19c7dfdc2d0fa93cdd1a0440a9c8116a2931861eb45a38a5df3e6cd0b13Approve(pending)2021-09-17 20:04:1113 mins ago0x640ad02d6c5a2c09847d9d15ef18369d23ea248a IN Aave: AAVE Token0 Ether(Pending)(Pending)
0xc6fecf4987e41bb5b5f6f6cc2e766fc01c0d9e1bce166622de0e86eef1aaed85Approve(pending)2021-09-17 19:55:4022 mins ago0xb3018d1cded859b367dfd812271f50c4ce819daf IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x1f5ec36dc0aebb7f791e3d5976b5031041251b6e9523e36bcbdf2c90a09b15e9Transfer(pending)2021-09-17 18:54:361 hr 23 mins ago0xde415dcaa9b596ba52fdf4ed080213b34fb3894c IN Aave: AAVE Token0 Ether(Pending)(Pending)
0xc10bbc841826c147662d4df8a77e6bd5fe7655d3654bbd6749d8d5b43e25b4ffApprove(pending)2021-09-17 18:24:311 hr 53 mins ago0xe805fab917678a9ff2d3afdce2efc2384fda8b1e IN Aave: AAVE Token0 Ether(Pending)(Pending)
0xed1f8577c94c61c0ba43dff1b469a6003a9f84eb5252f1b603d24bd18b29f280Transfer(pending)2021-09-17 15:59:574 hrs 17 mins ago0x1324eeeca7817bf4b71133b153428ae2905c7c63 IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x25230b6f87597038f4838ddee25a34c1d71efcc2157355ddcfa90c0d5ebec2ceTransfer(pending)2021-09-17 15:08:305 hrs 9 mins ago0x76402fdb5770ce62945ba7294ba69549f36f3953 IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x67a25188cc4b691ffbab2daed4c7ef17c7bc5416cc1acd5e270c2c8bc6eee7daApprove(pending)2021-09-17 4:41:4415 hrs 36 mins ago0xf9f4cece3f25c7402eb0506d78608727e543c6cd IN Aave: AAVE Token0 Ether(Pending)(Pending)
0xd180e8322767f564401c5ea01411c3c791781953fce3bd2b1e3452a180938093Transfer(pending)2021-09-17 3:07:4217 hrs 10 mins ago0xba4b04debaf5de97038e59f1d377bc973d67534f IN Aave: AAVE Token0 Ether(Pending)(Pending)
0xb562b3fc819e13b955bd9880d3216eecfb18996e8fa4b42755e221cf1dfe31d0Approve(pending)2021-09-16 19:18:101 day 59 mins ago0xf9f4cece3f25c7402eb0506d78608727e543c6cd IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x43696b067d956c8010b1b7f00696c71bc526ee18ea6ac48f3b38e0f2f5676e46Approve(pending)2021-09-16 19:18:101 day 59 mins ago0xf9f4cece3f25c7402eb0506d78608727e543c6cd IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x4422aecf493b6e8c2c909153dfff04f5bbd9ebd8231cfb2a2760589efe276e88Transfer(pending)2021-09-16 14:27:271 day 5 hrs ago0xdd9eaceb283fd7ff77fbb39d548ab03df3b72a9c IN Aave: AAVE Token0 Ether(Pending)(Pending)
0xb7093514fbf3892868a2022ee7c49b952c927c4274205b3a920225ddd9cd2516Transfer(pending)2021-09-15 14:30:132 days 5 hrs ago0x856580a0dd8c3363f87120a97a5e40a46e951605 IN Aave: AAVE Token0 Ether(Pending)(Pending)
0xfb9f68200edb29b0d7b8973028fd7f8ab848c243e6daa2169fa6b7a89eed8391Transfer(pending)2021-09-15 10:43:192 days 9 hrs ago0xa1a5e539a5d0164ce9f65418d106dd099b4c2549 IN Aave: AAVE Token0 Ether(Pending)(Pending)
0xf09ac2c0e280e73e4d9218f4b2ab90a85cf3b74ea8a18ed82ccd99d46e994736Transfer(pending)2021-09-15 10:40:452 days 9 hrs ago0x7999096f00a1618b0c2448b9258794498e1623f3 IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x1d3bd4f4c552ab50c5e74660aa1d8d2ed1ba94dd1db593ff49dd61e256c553a6Transfer(pending)2021-09-15 3:38:572 days 16 hrs ago0xdf9bef13e57a48bdc0badc3d2703c0724c94d73e IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x5652c14d2098cc80b1e5944bf62df907b3229ae9ee3be772381b53c73108fa66Approve(pending)2021-09-14 14:41:133 days 5 hrs ago0xae8a3b63cfe5514ed75243f82dd6a7cc2aa44980 IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x6a27ca0ca2f273474d1a69b131fb78557e9865aadb801c003d3afc801bdea55fTransfer(pending)2021-09-14 14:22:563 days 5 hrs ago0xd600a9122e592047ee121a023345d8e026dbc600 IN Aave: AAVE Token0 Ether(Pending)(Pending)
0xf892c4838897e95e7d20d179c3ad758a8739d75e2dd7101428015a3fb485dc58Transfer(pending)2021-09-13 13:33:584 days 6 hrs ago0x33516369f9df170edaba2d3dd6e4aeebeeeec731 IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x90c4df2e952b08e872040236ddbfc131bc47e4ff33a570dd804b808a7c299e2eApprove(pending)2021-09-13 10:33:284 days 9 hrs ago0xae8a3b63cfe5514ed75243f82dd6a7cc2aa44980 IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x43fbdc73ef4253597e3a5809d3127c4b8ea4d2762457793a71c54622edbd9968Transfer(pending)2021-09-12 2:44:345 days 17 hrs ago0x38778e43e53d1feba74e84cf719e9e105ff90141 IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x54b3a2c6abe1569abe26056b9185082314d55f198e7e53217121fe6fb9106daeApprove(pending)2021-09-12 1:47:145 days 18 hrs ago0xf661522f1c8c290d1fce017414018fd5c92ce584 IN Aave: AAVE Token0 Ether(Pending)(Pending)
0xeaea669293145de8c4b349e0556b9d12ede2c94bc885d2c8b6f6a79afdee9ca8Transfer(pending)2021-09-12 1:42:595 days 18 hrs ago0xc04c7055f1c59a7c5281e9ee2c272e2a0cb48b1e IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x63045af1ef220b9ecd44308a9e64c8921ab0faf762dab828a215e27cd7a2060cApprove(pending)2021-09-12 1:36:155 days 18 hrs ago0x8f2f97f38d485da25c92c7dafa0e0c649266a2b3 IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x024a24ee56296418292ed6e6a1ec0c7b63188d3d1ba4de9872e3e3bec3f9ece1Transfer(pending)2021-09-12 0:09:535 days 20 hrs ago0xdc52274cf0302a4d546f9fbe4b473bccdf0bbedf IN Aave: AAVE Token0 Ether(Pending)(Pending)
0x905291efe91e29c5d921b5dcce837b34fd3c3e16d96b4cce7d39f2617d1c902dTransfer(pending)2021-09-11 21:47:265 days 22 hrs ago0x631be10ed7ed521331d25c58d5728e0e4a58ee39 IN Aave: AAVE Token0 Ether(Pending)(Pending)

OVERVIEW

Aave is an Open Source and Non-Custodial protocol to earn interest on deposits & borrow assets. It also features access to highly innovative flash loans, which let developers borrow instantly and easily; no collateral needed. With 16 different assets, 5 of which are stablecoins.

View more zero value Internal Transactions in Advanced View mode
Loading

Contract Source Code Verified (Exact Match)

Contract Name:
InitializableAdminUpgradeabilityProxy

Compiler Version
v0.6.10+commit.00c0fcaf

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion
File 1 of 19 : IERC20.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

File 2 of 19 : IERC20Detailed.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import {IERC20} from "./IERC20.sol";

interface IERC20Detailed is IERC20 {
    function name() external view returns(string memory);
    function symbol() external view returns(string memory);
    function decimals() external view returns(uint8);
}

File 3 of 19 : ITransferHook.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

interface ITransferHook {
    function onTransfer(address from, address to, uint256 amount) external;
}

File 4 of 19 : Address.sol
pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
}

File 5 of 19 : BaseAdminUpgradeabilityProxy.sol
pragma solidity ^0.6.0;

import './UpgradeabilityProxy.sol';

/**
 * @title BaseAdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract BaseAdminUpgradeabilityProxy is BaseUpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
   * validated in the constructor.
   */

  bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes calldata data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    (bool success,) = newImplementation.delegatecall(data);
    require(success);
  }

  /**
   * @return adm The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal override virtual {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

File 6 of 19 : UpgradeabilityProxy.sol
pragma solidity ^0.6.0;

import './BaseUpgradeabilityProxy.sol';

/**
 * @title UpgradeabilityProxy
 * @dev Extends BaseUpgradeabilityProxy with a constructor for initializing
 * implementation and init data.
 */
contract UpgradeabilityProxy is BaseUpgradeabilityProxy {
  /**
   * @dev Contract constructor.
   * @param _logic Address of the initial implementation.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
  constructor(address _logic, bytes memory _data) public payable {
    assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1));
    _setImplementation(_logic);
    if(_data.length > 0) {
      (bool success,) = _logic.delegatecall(_data);
      require(success);
    }
  }  
}

File 7 of 19 : BaseUpgradeabilityProxy.sol
pragma solidity ^0.6.0;

import './Proxy.sol';
import './Address.sol';

/**
 * @title BaseUpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract BaseUpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address indexed implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
   * validated in the constructor.
   */
  bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

  /**
   * @dev Returns the current implementation.
   * @return impl Address of the current implementation
   */
  function _implementation() internal override view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) internal {
    require(Address.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

File 8 of 19 : Proxy.sol
pragma solidity ^0.6.0;

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
abstract contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  fallback () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal virtual view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize())

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize())

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize()) }
      default { return(0, returndatasize()) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal virtual {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

File 9 of 19 : Context.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

File 10 of 19 : ERC20.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "./Context.sol";
import "../interfaces/IERC20.sol";
import "./SafeMath.sol";
import "./Address.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string internal _name;
    string internal _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

File 11 of 19 : SafeMath.sol
pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

File 12 of 19 : InitializableAdminUpgradeabilityProxy.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.10;

import "./BaseAdminUpgradeabilityProxy.sol";
import "./InitializableUpgradeabilityProxy.sol";

/**
 * @title InitializableAdminUpgradeabilityProxy
 * @dev Extends from BaseAdminUpgradeabilityProxy with an initializer for 
 * initializing the implementation, admin, and init data.
 */
contract InitializableAdminUpgradeabilityProxy is BaseAdminUpgradeabilityProxy, InitializableUpgradeabilityProxy {
    /**
   * Contract initializer.
   * @param _logic address of the initial implementation.
   * @param _admin Address of the proxy administrator.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
    function initialize(address _logic, address _admin, bytes memory _data) public payable {
        require(_implementation() == address(0));
        InitializableUpgradeabilityProxy.initialize(_logic, _data);
        assert(ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _setAdmin(_admin);
    }

    /**
    * @dev Only fall back when the sender is not the admin.
    */
    function _willFallback() internal override(BaseAdminUpgradeabilityProxy, Proxy) {
        BaseAdminUpgradeabilityProxy._willFallback();
    }

}

File 13 of 19 : InitializableUpgradeabilityProxy.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.10;

import "./BaseUpgradeabilityProxy.sol";

/**
 * @title InitializableUpgradeabilityProxy
 * @dev Extends BaseUpgradeabilityProxy with an initializer for initializing
 * implementation and init data.
 */
contract InitializableUpgradeabilityProxy is BaseUpgradeabilityProxy {
    /**
   * @dev Contract initializer.
   * @param _logic Address of the initial implementation.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
    function initialize(address _logic, bytes memory _data) public payable {
        require(_implementation() == address(0));
        assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _setImplementation(_logic);
        if (_data.length > 0) {
            (bool success, ) = _logic.delegatecall(_data);
            require(success);
        }
    }
}

File 14 of 19 : AaveToken.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import {ERC20} from "../open-zeppelin/ERC20.sol";
import {ITransferHook} from "../interfaces/ITransferHook.sol";
import {VersionedInitializable} from "../utils/VersionedInitializable.sol";


/**
* @notice implementation of the AAVE token contract
* @author Aave
*/
contract AaveToken is ERC20, VersionedInitializable {

    /// @dev snapshot of a value on a specific block, used for balances
    struct Snapshot {
        uint128 blockNumber;
        uint128 value;
    }

    string internal constant NAME = "Aave Token";
    string internal constant SYMBOL = "AAVE";
    uint8 internal constant DECIMALS = 18;

    /// @dev the amount being distributed for the LEND -> AAVE migration
    uint256 internal constant MIGRATION_AMOUNT = 13000000 ether;

    /// @dev the amount being distributed for the PSI and PEI
    uint256 internal constant DISTRIBUTION_AMOUNT = 3000000 ether;

    uint256 public constant REVISION = 1;

    /// @dev owner => next valid nonce to submit with permit()
    mapping (address => uint256) public _nonces;

    mapping (address => mapping (uint256 => Snapshot)) public _snapshots;

    mapping (address => uint256) public _countsSnapshots;

    /// @dev reference to the Aave governance contract to call (if initialized) on _beforeTokenTransfer
    /// !!! IMPORTANT The Aave governance is considered a trustable contract, being its responsibility
    /// to control all potential reentrancies by calling back the AaveToken
    ITransferHook public _aaveGovernance;

    bytes32 public DOMAIN_SEPARATOR;
    bytes public constant EIP712_REVISION = bytes("1");
    bytes32 internal constant EIP712_DOMAIN = keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
    bytes32 public constant PERMIT_TYPEHASH = keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    event SnapshotDone(address owner, uint128 oldValue, uint128 newValue);

    constructor() ERC20(NAME, SYMBOL) public {}

    /**
    * @dev initializes the contract upon assignment to the InitializableAdminUpgradeabilityProxy
    * @param migrator the address of the LEND -> AAVE migration contract
    * @param distributor the address of the AAVE distribution contract
    */
    function initialize(
        address migrator,
        address distributor,
        ITransferHook aaveGovernance
    ) external initializer {

        uint256 chainId;

        //solium-disable-next-line
        assembly {
            chainId := chainid()
        }

        DOMAIN_SEPARATOR = keccak256(abi.encode(
            EIP712_DOMAIN,
            keccak256(bytes(NAME)),
            keccak256(EIP712_REVISION),
            chainId,
            address(this)
        ));
        _name = NAME;
        _symbol = SYMBOL;
        _setupDecimals(DECIMALS);
        _aaveGovernance = aaveGovernance;
        _mint(migrator, MIGRATION_AMOUNT);
        _mint(distributor, DISTRIBUTION_AMOUNT);
    }

    /**
    * @dev implements the permit function as for https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
    * @param owner the owner of the funds
    * @param spender the spender
    * @param value the amount
    * @param deadline the deadline timestamp, type(uint256).max for no deadline
    * @param v signature param
    * @param s signature param
    * @param r signature param
    */

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external {
        require(owner != address(0), "INVALID_OWNER");
        //solium-disable-next-line
        require(block.timestamp <= deadline, "INVALID_EXPIRATION");
        uint256 currentValidNonce = _nonces[owner];
        bytes32 digest = keccak256(
                abi.encodePacked(
                    "\x19\x01",
                    DOMAIN_SEPARATOR,
                    keccak256(
                        abi.encode(PERMIT_TYPEHASH, owner, spender, value, currentValidNonce, deadline))
                    )
        );

        require(owner == ecrecover(digest, v, r, s), "INVALID_SIGNATURE");
        _nonces[owner] = currentValidNonce.add(1);
        _approve(owner, spender, value);
    }

    /**
    * @dev returns the revision of the implementation contract
    */
    function getRevision() internal pure override returns (uint256) {
        return REVISION;
    }

    /**
    * @dev Writes a snapshot for an owner of tokens
    * @param owner The owner of the tokens
    * @param oldValue The value before the operation that is gonna be executed after the snapshot
    * @param newValue The value after the operation
    */
    function _writeSnapshot(address owner, uint128 oldValue, uint128 newValue) internal {
        uint128 currentBlock = uint128(block.number);

        uint256 ownerCountOfSnapshots = _countsSnapshots[owner];
        mapping (uint256 => Snapshot) storage snapshotsOwner = _snapshots[owner];

        // Doing multiple operations in the same block
        if (ownerCountOfSnapshots != 0 && snapshotsOwner[ownerCountOfSnapshots.sub(1)].blockNumber == currentBlock) {
            snapshotsOwner[ownerCountOfSnapshots.sub(1)].value = newValue;
        } else {
            snapshotsOwner[ownerCountOfSnapshots] = Snapshot(currentBlock, newValue);
            _countsSnapshots[owner] = ownerCountOfSnapshots.add(1);
        }

        emit SnapshotDone(owner, oldValue, newValue);
    }

    /**
    * @dev Writes a snapshot before any operation involving transfer of value: _transfer, _mint and _burn
    * - On _transfer, it writes snapshots for both "from" and "to"
    * - On _mint, only for _to
    * - On _burn, only for _from
    * @param from the from address
    * @param to the to address
    * @param amount the amount to transfer
    */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal override {
        if (from == to) {
            return;
        }

        if (from != address(0)) {
            uint256 fromBalance = balanceOf(from);
            _writeSnapshot(from, uint128(fromBalance), uint128(fromBalance.sub(amount)));
        }
        if (to != address(0)) {
            uint256 toBalance = balanceOf(to);
            _writeSnapshot(to, uint128(toBalance), uint128(toBalance.add(amount)));
        }

        // caching the aave governance address to avoid multiple state loads
        ITransferHook aaveGovernance = _aaveGovernance;
        if (aaveGovernance != ITransferHook(0)) {
            aaveGovernance.onTransfer(from, to, amount);
        }
    }
}

File 15 of 19 : VersionedInitializable.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

/**
 * @title VersionedInitializable
 *
 * @dev Helper contract to support initializer functions. To use it, replace
 * the constructor with a function that has the `initializer` modifier.
 * WARNING: Unlike constructors, initializer functions must be manually
 * invoked. This applies both to deploying an Initializable contract, as well
 * as extending an Initializable contract via inheritance.
 * WARNING: When used with inheritance, manual care must be taken to not invoke
 * a parent initializer twice, or ensure that all initializers are idempotent,
 * because this is not dealt with automatically as with constructors.
 *
 * @author Aave, inspired by the OpenZeppelin Initializable contract
 */
abstract contract VersionedInitializable {
    /**
   * @dev Indicates that the contract has been initialized.
   */
    uint256 internal lastInitializedRevision = 0;

   /**
   * @dev Modifier to use in the initializer function of a contract.
   */
    modifier initializer() {
        uint256 revision = getRevision();
        require(revision > lastInitializedRevision, "Contract instance has already been initialized");

        lastInitializedRevision = revision;

        _;

    }

    /// @dev returns the revision number of the contract.
    /// Needs to be defined in the inherited class as a constant.
    function getRevision() internal pure virtual returns(uint256);


    // Reserved storage space to allow for layout changes in the future.
    uint256[50] private ______gap;
}

File 16 of 19 : LendToAaveMigrator.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import {IERC20} from "../interfaces/IERC20.sol";
import {SafeMath} from "../open-zeppelin/SafeMath.sol";
import {VersionedInitializable} from "../utils/VersionedInitializable.sol";


/**
* @title LendToAaveMigrator
* @notice This contract implements the migration from LEND to AAVE token
* @author Aave 
*/
contract LendToAaveMigrator is VersionedInitializable {
    using SafeMath for uint256;

    IERC20 public immutable AAVE;
    IERC20 public immutable LEND;
    uint256 public immutable LEND_AAVE_RATIO;
    uint256 public constant REVISION = 1;
    
    uint256 public _totalLendMigrated;

    /**
    * @dev emitted on migration
    * @param sender the caller of the migration
    * @param amount the amount being migrated
    */
    event LendMigrated(address indexed sender, uint256 indexed amount);

    /**
    * @param aave the address of the AAVE token
    * @param lend the address of the LEND token
    * @param lendAaveRatio the exchange rate between LEND and AAVE 
     */
    constructor(IERC20 aave, IERC20 lend, uint256 lendAaveRatio) public {
        AAVE = aave;
        LEND = lend;
        LEND_AAVE_RATIO = lendAaveRatio;
    }

    /**
    * @dev initializes the implementation
    */
    function initialize() public initializer {
    }

    /**
    * @dev returns true if the migration started
    */
    function migrationStarted() external view returns(bool) {
        return lastInitializedRevision != 0;
    }


    /**
    * @dev executes the migration from LEND to AAVE. Users need to give allowance to this contract to transfer LEND before executing
    * this transaction.
    * @param amount the amount of LEND to be migrated
    */
    function migrateFromLEND(uint256 amount) external {
        require(lastInitializedRevision != 0, "MIGRATION_NOT_STARTED");

        _totalLendMigrated = _totalLendMigrated.add(amount);
        LEND.transferFrom(msg.sender, address(this), amount);
        AAVE.transfer(msg.sender, amount.div(LEND_AAVE_RATIO));
        emit LendMigrated(msg.sender, amount);
    }

    /**
    * @dev returns the implementation revision
    * @return the implementation revision
    */
    function getRevision() internal pure override returns (uint256) {
        return REVISION;
    }

}

File 17 of 19 : DoubleTransferHelper.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import "../interfaces/IERC20.sol";

contract DoubleTransferHelper {

    IERC20 public immutable AAVE;

    constructor(IERC20 aave) public {
        AAVE = aave;
    }

    function doubleSend(address to, uint256 amount1, uint256 amount2) external {
        AAVE.transfer(to, amount1);
        AAVE.transfer(to, amount2);
    }
}

File 18 of 19 : MintableErc20.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import "../open-zeppelin/ERC20.sol";

/**
 * @title ERC20Mintable
 * @dev ERC20 minting logic
 */
contract MintableErc20 is ERC20 {
    constructor(string memory name, string memory symbol, uint8 decimals) ERC20(name, symbol) public {
        _setupDecimals(decimals);
    }
    /**
     * @dev Function to mint tokens
     * @param value The amount of tokens to mint.
     * @return A boolean that indicates if the operation was successful.
     */
    function mint(uint256 value) public returns (bool) {
        _mint(msg.sender, value);
        return true;
    }
}

File 19 of 19 : MockTransferHook.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import {ITransferHook} from "../interfaces/ITransferHook.sol";

contract MockTransferHook is ITransferHook {
    event MockHookEvent();

    function onTransfer(address from, address to, uint256 amount) external override {
        emit MockHookEvent();
    }
}

Settings
{
  "metadata": {
    "useLiteralContent": false
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "evmVersion": "istanbul",
  "libraries": {}
}

Contract Security Audit

Contract ABI

[{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"previousAdmin","type":"address"},{"indexed":false,"internalType":"address","name":"newAdmin","type":"address"}],"name":"AdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"implementation","type":"address"}],"name":"Upgraded","type":"event"},{"stateMutability":"payable","type":"fallback"},{"inputs":[],"name":"admin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newAdmin","type":"address"}],"name":"changeAdmin","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"implementation","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_logic","type":"address"},{"internalType":"address","name":"_admin","type":"address"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"initialize","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_logic","type":"address"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"initialize","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"}],"name":"upgradeTo","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"upgradeToAndCall","outputs":[],"stateMutability":"payable","type":"function"}]

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

Block Transaction Difficulty Gas Used Reward
Block Uncle Number Difficulty Gas Used Reward
Loading
Loading
Make sure to use the "Vote Down" button for any spammy posts, and the "Vote Up" for interesting conversations.