Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

pragma solidity =0.7.6;

import "./ERC20PermitUpgradeable.sol";
import "./ERC20PausableUpgradeable.sol";
import "./ERC20SupplyControlledUpgradeable.sol";

/**
 * @dev {ERC20} FLOAT token, including:
 *
 * - a minter role that allows for token minting (necessary for stabilisation)
 * - the ability to burn tokens (necessary for stabilisation)
 * - the use of permits to reduce gas costs
 * - a pauser role that allows to stop all token transfers
 *
 * This contract uses OpenZeppelin {AccessControlUpgradeable} to lock permissioned functions
 * using the different roles.
 * This contract is upgradable.
 */
contract FloatTokenV1 is
  ERC20PausableUpgradeable,
  ERC20PermitUpgradeable,
  ERC20SupplyControlledUpgradeable
{
  /**
   * @notice Construct a FloatTokenV1 instance
   * @param governance The default role controller, minter and pauser for the contract.
   * @param minter An additional minter (useful for quick launches, check this is revoked)
   * @dev We expect minters to be defined on deploy, e.g. AuctionHouse should get minter role
   */
  function initialize(address governance, address minter) external initializer {
    __Context_init_unchained();
    __ERC20_init_unchained("Float Protocol: FLOAT", "FLOAT");
    __ERC20Permit_init_unchained("Float Protocol: FLOAT", "1");
    __ERC20Pausable_init_unchained(governance);
    __ERC20SupplyControlled_init_unchained(governance);

    _setupRole(DEFAULT_ADMIN_ROLE, governance);

    // Quick launches
    _setupRole(MINTER_ROLE, minter);
  }

  /// @dev Hint to compiler, that this override has already occured.
  function _beforeTokenTransfer(
    address from,
    address to,
    uint256 amount
  ) internal virtual override(ERC20Upgradeable, ERC20PausableUpgradeable) {
    super._beforeTokenTransfer(from, to, amount);
  }
}

// SPDX-License-Identifier: MIT

pragma solidity =0.7.6;

import "@openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/GSN/ContextUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/PausableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/proxy/Initializable.sol";

import "../external-lib/Counters.sol";
import "../external-lib/EIP712.sol";
import "./interfaces/IERC20Permit.sol";

/**
 * @dev Wrapper implementation for ERC20 Permit extension allowing approvals
 * via signatures, as defined in https://eips.ethereum.org/EIPS/eip-2612.
 */
contract ERC20PermitUpgradeable is
  IERC20Permit,
  Initializable,
  ERC20Upgradeable
{
  using Counters for Counters.Counter;

  bytes32 private constant PERMIT_TYPEHASH =
    keccak256(
      "Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
    );

  bytes32 internal _domainSeparator;

  mapping(address => Counters.Counter) private _nonces;

  // solhint-disable-next-line func-name-mixedcase
  function __ERC20Permit_init_unchained(
    string memory domainName,
    string memory version
  ) internal initializer {
    _domainSeparator = EIP712.domainSeparatorV4(domainName, version);
  }

  /// @inheritdoc IERC20Permit
  // solhint-disable-next-line func-name-mixedcase
  function DOMAIN_SEPARATOR()
    external
    view
    override(IERC20Permit)
    returns (bytes32)
  {
    return _domainSeparator;
  }

  /**
   * @dev See {IERC20Permit-permit}.
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external override(IERC20Permit) {
    // solhint-disable-next-line not-rely-on-time
    require(block.timestamp <= deadline, "ERC20Permit/ExpiredDeadline");

    bytes32 structHash =
      keccak256(
        abi.encode(
          PERMIT_TYPEHASH,
          owner,
          spender,
          value,
          _useNonce(owner),
          deadline
        )
      );

    bytes32 hash = EIP712.hashTypedDataV4(_domainSeparator, structHash);

    address signer = ECDSA.recover(hash, v, r, s);
    require(signer == owner, "ERC20Permit/InvalidSignature");

    _approve(owner, spender, value);
  }

  /// @inheritdoc IERC20Permit
  function nonces(address owner)
    external
    view
    virtual
    override(IERC20Permit)
    returns (uint256)
  {
    return _nonces[owner].current();
  }

  /**
   * @dev "Consume a nonce": return the current value and increment.
   */
  function _useNonce(address owner) internal virtual returns (uint256 current) {
    Counters.Counter storage nonce = _nonces[owner];
    current = nonce.current();
    nonce.increment();
  }

  uint256[48] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity =0.7.6;

import "@openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/PausableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/proxy/Initializable.sol";

/**
 * @title {ERC20} Pausable token through the PAUSER_ROLE
 *
 * @dev This contract uses OpenZeppelin {AccessControlUpgradeable} to lock permissioned functions using the different roles.
 */
abstract contract ERC20PausableUpgradeable is
  Initializable,
  PausableUpgradeable,
  AccessControlUpgradeable,
  ERC20Upgradeable
{
  bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");

  // solhint-disable-next-line func-name-mixedcase
  function __ERC20Pausable_init_unchained(address pauser) internal initializer {
    _setupRole(PAUSER_ROLE, pauser);
  }

  /**
   * @dev Pauses all token transfers.
   *
   * See {ERC20Pausable} and {Pausable-_pause}.
   *
   * Requirements:
   *
   * - the caller must have the `PAUSER_ROLE`.
   */
  function pause() external {
    require(
      hasRole(PAUSER_ROLE, _msgSender()),
      "ERC20Pausable/PauserRoleRequired"
    );
    _pause();
  }

  /**
   * @dev Unpauses all token transfers.
   *
   * See {ERC20Pausable} and {Pausable-_unpause}.
   *
   * Requirements:
   *
   * - the caller must have the `PAUSER_ROLE`.
   */
  function unpause() external {
    require(
      hasRole(PAUSER_ROLE, _msgSender()),
      "ERC20Pausable/PauserRoleRequired"
    );
    _unpause();
  }

  function _beforeTokenTransfer(
    address from,
    address to,
    uint256 amount
  ) internal virtual override(ERC20Upgradeable) {
    super._beforeTokenTransfer(from, to, amount);

    require(!paused(), "ERC20Pausable/Paused");
  }

  uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity =0.7.6;

import "@openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/proxy/Initializable.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";

/**
 * @title {ERC20} Supply Controlled token that allows burning (by all), and minting
 * by MINTER_ROLE
 *
 * @dev This contract uses OpenZeppelin {AccessControlUpgradeable} to lock permissioned functions using the different roles.
 */
abstract contract ERC20SupplyControlledUpgradeable is
  Initializable,
  AccessControlUpgradeable,
  ERC20Upgradeable
{
  using SafeMath for uint256;

  bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");

  // solhint-disable-next-line func-name-mixedcase
  function __ERC20SupplyControlled_init_unchained(address minter)
    internal
    initializer
  {
    _setupRole(MINTER_ROLE, minter);
  }

  /**
   * @dev Creates `amount` new tokens for `to`.
   *
   * See {ERC20-_mint}.
   *
   * Requirements:
   *
   * - the caller must have the `MINTER_ROLE`.
   */
  function mint(address to, uint256 amount) external virtual {
    require(
      hasRole(MINTER_ROLE, _msgSender()),
      "ERC20SupplyControlled/MinterRole"
    );
    _mint(to, amount);
  }

  /**
   * @dev Destroys `amount` tokens from the caller.
   *
   * See {ERC20-_burn}.
   */
  function burn(uint256 amount) external virtual {
    _burn(_msgSender(), amount);
  }

  /**
   * @dev Destroys `amount` tokens from `account`, deducting from the caller's
   * allowance.
   *
   * See {ERC20-_burn} and {ERC20-allowance}.
   *
   * Requirements:
   *
   * - the caller must have allowance for `accounts`'s tokens of at least
   * `amount`.
   */
  function burnFrom(address account, uint256 amount) external virtual {
    uint256 decreasedAllowance =
      allowance(account, _msgSender()).sub(
        amount,
        "ERC20SupplyControlled/Overburn"
      );

    _approve(account, _msgSender(), decreasedAllowance);
    _burn(account, amount);
  }

  uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/EnumerableSetUpgradeable.sol";
import "../utils/AddressUpgradeable.sol";
import "../utils/ContextUpgradeable.sol";
import "../proxy/Initializable.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable {
    function __AccessControl_init() internal initializer {
        __Context_init_unchained();
        __AccessControl_init_unchained();
    }

    function __AccessControl_init_unchained() internal initializer {
    }
    using EnumerableSetUpgradeable for EnumerableSetUpgradeable.AddressSet;
    using AddressUpgradeable for address;

    struct RoleData {
        EnumerableSetUpgradeable.AddressSet members;
        bytes32 adminRole;
    }

    mapping (bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view returns (bool) {
        return _roles[role].members.contains(account);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view returns (uint256) {
        return _roles[role].members.length();
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
        return _roles[role].members.at(index);
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");

        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");

        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
        _roles[role].adminRole = adminRole;
    }

    function _grantRole(bytes32 role, address account) private {
        if (_roles[role].members.add(account)) {
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (_roles[role].members.remove(account)) {
            emit RoleRevoked(role, account, _msgSender());
        }
    }
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/ContextUpgradeable.sol";

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/ContextUpgradeable.sol";
import "./IERC20Upgradeable.sol";
import "../../math/SafeMathUpgradeable.sol";
import "../../proxy/Initializable.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable {
    using SafeMathUpgradeable for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    function __ERC20_init(string memory name_, string memory symbol_) internal initializer {
        __Context_init_unchained();
        __ERC20_init_unchained(name_, symbol_);
    }

    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal initializer {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
    uint256[44] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./ContextUpgradeable.sol";
import "../proxy/Initializable.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal initializer {
        __Context_init_unchained();
        __Pausable_init_unchained();
    }

    function __Pausable_init_unchained() internal initializer {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT

// solhint-disable-next-line compiler-version
pragma solidity >=0.4.24 <0.8.0;

import "../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 */
abstract contract Initializable {

    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        require(_initializing || _isConstructor() || !_initialized, "Initializable: contract is already initialized");

        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }

        _;

        if (isTopLevelCall) {
            _initializing = false;
        }
    }

    /// @dev Returns true if and only if the function is running in the constructor
    function _isConstructor() private view returns (bool) {
        return !AddressUpgradeable.isContract(address(this));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.6;

/**
 * @title Counters
 * @author Matt Condon (@shrugs) https://github.com/OpenZeppelin/openzeppelin-contracts
 * @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
  struct Counter {
    // This variable should never be directly accessed by users of the library: interactions must be restricted to
    // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
    // this feature: see https://github.com/ethereum/solidity/issues/4637
    uint256 _value; // default: 0
  }

  function current(Counter storage counter) internal view returns (uint256) {
    return counter._value;
  }

  function increment(Counter storage counter) internal {
    counter._value += 1;
  }

  function decrement(Counter storage counter) internal {
    uint256 value = counter._value;
    require(value > 0, "Counter: decrement overflow");
    counter._value = value - 1;
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.6;

import "./ECDSA.sol";

// Based on OpenZeppelin's draft EIP712, with updates to remove storage variables.

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 */
library EIP712 {
  bytes32 private constant _TYPE_HASH =
    keccak256(
      "EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
    );

  /**
   * @dev Returns the domain separator for the current chain.
   */
  function domainSeparatorV4(string memory name, string memory version)
    internal
    view
    returns (bytes32)
  {
    return
      _buildDomainSeparator(
        _TYPE_HASH,
        keccak256(bytes(name)),
        keccak256(bytes(version))
      );
  }

  function _buildDomainSeparator(
    bytes32 typeHash,
    bytes32 name,
    bytes32 version
  ) private view returns (bytes32) {
    uint256 chainId;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      chainId := chainid()
    }
    return
      keccak256(abi.encode(typeHash, name, version, chainId, address(this)));
  }

  /**
   * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
   * function returns the hash of the fully encoded EIP712 message for the given domain.
   *
   * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
   *
   * ```solidity
   * bytes32 digest = EIP712.hashTypedDataV4(
   *   EIP712.domainSeparatorV4("DApp Name", "1"),
   *   keccak256(abi.encode(
   *     keccak256("Mail(address to,string contents)"),
   *     mailTo,
   *     keccak256(bytes(mailContents))
   * )));
   * address signer = ECDSA.recover(digest, signature);
   * ```
   */
  function hashTypedDataV4(bytes32 domainSeparator, bytes32 structHash)
    internal
    pure
    returns (bytes32)
  {
    return ECDSA.toTypedDataHash(domainSeparator, structHash);
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
  /**
   * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
   * given ``owner``'s signed approval.
   *
   * IMPORTANT: The same issues {IERC20-approve} has related to transaction
   * ordering also apply here.
   *
   * Emits an {Approval} event.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   * - `deadline` must be a timestamp in the future.
   * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
   * over the EIP712-formatted function arguments.
   * - the signature must use ``owner``'s current nonce (see {nonces}).
   *
   * For more information on the signature format, see the
   * https://eips.ethereum.org/EIPS/eip-2612.
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;

  /**
   * @dev Returns the current nonce for `owner`. This value must be
   * included whenever a signature is generated for {permit}.
   *
   * Every successful call to {permit} increases ``owner``'s nonce by one. This
   * prevents a signature from being used multiple times.
   */
  function nonces(address owner) external view returns (uint256);

  /**
   * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
   */
  // solhint-disable-next-line func-name-mixedcase
  function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSetUpgradeable {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;
import "../proxy/Initializable.sol";

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal initializer {
        __Context_init_unchained();
    }

    function __Context_init_unchained() internal initializer {
    }
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20Upgradeable {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMathUpgradeable {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.6;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
  /**
   * @dev Returns the address that signed a hashed message (`hash`) with
   * `signature`. This address can then be used for verification purposes.
   *
   * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
   * this function rejects them by requiring the `s` value to be in the lower
   * half order, and the `v` value to be either 27 or 28.
   *
   * IMPORTANT: `hash` _must_ be the result of a hash operation for the
   * verification to be secure: it is possible to craft signatures that
   * recover to arbitrary addresses for non-hashed data. A safe way to ensure
   * this is by receiving a hash of the original message (which may otherwise
   * be too long), and then calling {toEthSignedMessageHash} on it.
   */
  function recover(bytes32 hash, bytes memory signature)
    internal
    pure
    returns (address)
  {
    // Divide the signature in r, s and v variables
    bytes32 r;
    bytes32 s;
    uint8 v;

    // Check the signature length
    // - case 65: r,s,v signature (standard)
    // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
    if (signature.length == 65) {
      // ecrecover takes the signature parameters, and the only way to get them
      // currently is to use assembly.
      // solhint-disable-next-line no-inline-assembly
      assembly {
        r := mload(add(signature, 0x20))
        s := mload(add(signature, 0x40))
        v := byte(0, mload(add(signature, 0x60)))
      }
    } else if (signature.length == 64) {
      // ecrecover takes the signature parameters, and the only way to get them
      // currently is to use assembly.
      // solhint-disable-next-line no-inline-assembly
      assembly {
        let vs := mload(add(signature, 0x40))
        r := mload(add(signature, 0x20))
        s := and(
          vs,
          0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
        )
        v := add(shr(255, vs), 27)
      }
    } else {
      revert("ECDSA: invalid signature length");
    }

    return recover(hash, v, r, s);
  }

  /**
   * @dev Overload of {ECDSA-recover} that receives the `v`,
   * `r` and `s` signature fields separately.
   */
  function recover(
    bytes32 hash,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) internal pure returns (address) {
    // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
    // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
    // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
    // signatures from current libraries generate a unique signature with an s-value in the lower half order.
    //
    // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
    // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
    // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
    // these malleable signatures as well.
    require(
      uint256(s) <=
        0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0,
      "ECDSA: invalid signature 's' value"
    );
    require(v == 27 || v == 28, "ECDSA: invalid signature 'v' value");

    // If the signature is valid (and not malleable), return the signer address
    address signer = ecrecover(hash, v, r, s);
    require(signer != address(0), "ECDSA: invalid signature");

    return signer;
  }

  /**
   * @dev Returns an Ethereum Signed Message, created from a `hash`. This
   * produces hash corresponding to the one signed with the
   * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
   * JSON-RPC method as part of EIP-191.
   *
   * See {recover}.
   */
  function toEthSignedMessageHash(bytes32 hash)
    internal
    pure
    returns (bytes32)
  {
    // 32 is the length in bytes of hash,
    // enforced by the type signature above
    return
      keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
  }

  /**
   * @dev Returns an Ethereum Signed Typed Data, created from a
   * `domainSeparator` and a `structHash`. This produces hash corresponding
   * to the one signed with the
   * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
   * JSON-RPC method as part of EIP-712.
   *
   * See {recover}.
   */
  function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash)
    internal
    pure
    returns (bytes32)
  {
    return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
  }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 999999
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "metadata": {
    "bytecodeHash": "none",
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINTER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PAUSER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getRoleMember","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleMemberCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"governance","type":"address"},{"internalType":"address","name":"minter","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

0x608060405234801561001057600080fd5b50600436106101e55760003560e01c806370a082311161010f578063a457c2d7116100a2578063d539139311610071578063d5391393146106cb578063d547741f146106d3578063dd62ed3e1461070c578063e63ab1e914610747576101e5565b8063a457c2d7146105de578063a9059cbb14610617578063ca15c87314610650578063d505accf1461066d576101e5565b80639010d07c116100de5780639010d07c1461054957806391d148541461059557806395d89b41146105ce578063a217fddf146105d6576101e5565b806370a08231146104a257806379cc6790146104d55780637ecebe001461050e5780638456cb5914610541576101e5565b80633644e5151161018757806340c10f191161015657806340c10f191461040957806342966c6814610442578063485cc9551461045f5780635c975abb1461049a576101e5565b80633644e5151461038757806336568abe1461038f57806339509351146103c85780633f4ba83a14610401576101e5565b806323b872dd116101c357806323b872dd146102ce578063248a9ca3146103115780632f2ff15d1461032e578063313ce56714610369576101e5565b806306fdde03146101ea578063095ea7b31461026757806318160ddd146102b4575b600080fd5b6101f261074f565b6040805160208082528351818301528351919283929083019185019080838360005b8381101561022c578181015183820152602001610214565b50505050905090810190601f1680156102595780820380516001836020036101000a031916815260200191505b509250505060405180910390f35b6102a06004803603604081101561027d57600080fd5b5073ffffffffffffffffffffffffffffffffffffffff8135169060200135610803565b604080519115158252519081900360200190f35b6102bc610821565b60408051918252519081900360200190f35b6102a0600480360360608110156102e457600080fd5b5073ffffffffffffffffffffffffffffffffffffffff813581169160208101359091169060400135610827565b6102bc6004803603602081101561032757600080fd5b50356108c8565b6103676004803603604081101561034457600080fd5b508035906020013573ffffffffffffffffffffffffffffffffffffffff166108dd565b005b610371610963565b6040805160ff9092168252519081900360200190f35b6102bc61096c565b610367600480360360408110156103a557600080fd5b508035906020013573ffffffffffffffffffffffffffffffffffffffff16610972565b6102a0600480360360408110156103de57600080fd5b5073ffffffffffffffffffffffffffffffffffffffff8135169060200135610a07565b610367610a62565b6103676004803603604081101561041f57600080fd5b5073ffffffffffffffffffffffffffffffffffffffff8135169060200135610b03565b6103676004803603602081101561045857600080fd5b5035610ba4565b6103676004803603604081101561047557600080fd5b5073ffffffffffffffffffffffffffffffffffffffff81358116916020013516610bb8565b6102a0610e05565b6102bc600480360360208110156104b857600080fd5b503573ffffffffffffffffffffffffffffffffffffffff16610e0e565b610367600480360360408110156104eb57600080fd5b5073ffffffffffffffffffffffffffffffffffffffff8135169060200135610e36565b6102bc6004803603602081101561052457600080fd5b503573ffffffffffffffffffffffffffffffffffffffff16610ea8565b610367610ed6565b61056c6004803603604081101561055f57600080fd5b5080359060200135610f75565b6040805173ffffffffffffffffffffffffffffffffffffffff9092168252519081900360200190f35b6102a0600480360360408110156105ab57600080fd5b508035906020013573ffffffffffffffffffffffffffffffffffffffff16610f94565b6101f2610fac565b6102bc61102b565b6102a0600480360360408110156105f457600080fd5b5073ffffffffffffffffffffffffffffffffffffffff8135169060200135611030565b6102a06004803603604081101561062d57600080fd5b5073ffffffffffffffffffffffffffffffffffffffff81351690602001356110a5565b6102bc6004803603602081101561066657600080fd5b50356110b9565b610367600480360360e081101561068357600080fd5b5073ffffffffffffffffffffffffffffffffffffffff813581169160208101359091169060408101359060608101359060ff6080820135169060a08101359060c001356110d0565b6102bc6112b7565b610367600480360360408110156106e957600080fd5b508035906020013573ffffffffffffffffffffffffffffffffffffffff166112db565b6102bc6004803603604081101561072257600080fd5b5073ffffffffffffffffffffffffffffffffffffffff8135811691602001351661134e565b6102bc611386565b609a8054604080516020601f60027fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff6101006001881615020190951694909404938401819004810282018101909252828152606093909290918301828280156107f95780601f106107ce576101008083540402835291602001916107f9565b820191906000526020600020905b8154815290600101906020018083116107dc57829003601f168201915b5050505050905090565b60006108176108106113aa565b84846113ae565b5060015b92915050565b60995490565b60006108348484846114f5565b6108be846108406113aa565b6108b985604051806060016040528060288152602001612bac6028913973ffffffffffffffffffffffffffffffffffffffff8a1660009081526098602052604081209061088b6113aa565b73ffffffffffffffffffffffffffffffffffffffff16815260208101919091526040016000205491906116c7565b6113ae565b5060019392505050565b60009081526065602052604090206002015490565b600082815260656020526040902060020154610900906108fb6113aa565b610f94565b610955576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602f815260200180612a71602f913960400191505060405180910390fd5b61095f8282611778565b5050565b609c5460ff1690565b60fb5490565b61097a6113aa565b73ffffffffffffffffffffffffffffffffffffffff168173ffffffffffffffffffffffffffffffffffffffff16146109fd576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602f815260200180612c63602f913960400191505060405180910390fd5b61095f82826117fb565b6000610817610a146113aa565b846108b98560986000610a256113aa565b73ffffffffffffffffffffffffffffffffffffffff908116825260208083019390935260409182016000908120918c16815292529020549061187e565b610a8e7f65d7a28e3265b37a6474929f336521b332c1681b933f6cb9f3376673440d862a6108fb6113aa565b610af957604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820181905260248201527f45524332305061757361626c652f506175736572526f6c655265717569726564604482015290519081900360640190fd5b610b016118f2565b565b610b2f7f9f2df0fed2c77648de5860a4cc508cd0818c85b8b8a1ab4ceeef8d981c8956a66108fb6113aa565b610b9a57604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820181905260248201527f4552433230537570706c79436f6e74726f6c6c65642f4d696e746572526f6c65604482015290519081900360640190fd5b61095f82826119e0565b610bb5610baf6113aa565b82611b13565b50565b600054610100900460ff1680610bd15750610bd1611c5d565b80610bdf575060005460ff16155b610c34576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602e815260200180612b5c602e913960400191505060405180910390fd5b600054610100900460ff16158015610c9a57600080547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff007fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00ff909116610100171660011790555b610ca2611c6e565b610d166040518060400160405280601581526020017f466c6f61742050726f746f636f6c3a20464c4f415400000000000000000000008152506040518060400160405280600581526020017f464c4f4154000000000000000000000000000000000000000000000000000000815250611d81565b610d8a6040518060400160405280601581526020017f466c6f61742050726f746f636f6c3a20464c4f415400000000000000000000008152506040518060400160405280600181526020017f3100000000000000000000000000000000000000000000000000000000000000815250611ee9565b610d938361200b565b610d9c83612149565b610da7600084610955565b610dd17f9f2df0fed2c77648de5860a4cc508cd0818c85b8b8a1ab4ceeef8d981c8956a683610955565b8015610e0057600080547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00ff1690555b505050565b60335460ff1690565b73ffffffffffffffffffffffffffffffffffffffff1660009081526097602052604090205490565b6000610e8a826040518060400160405280601e81526020017f4552433230537570706c79436f6e74726f6c6c65642f4f7665726275726e0000815250610e8386610e7e6113aa565b61134e565b91906116c7565b9050610e9e83610e986113aa565b836113ae565b610e008383611b13565b73ffffffffffffffffffffffffffffffffffffffff8116600090815260fc6020526040812061081b90612255565b610f027f65d7a28e3265b37a6474929f336521b332c1681b933f6cb9f3376673440d862a6108fb6113aa565b610f6d57604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820181905260248201527f45524332305061757361626c652f506175736572526f6c655265717569726564604482015290519081900360640190fd5b610b01612259565b6000828152606560205260408120610f8d9083612321565b9392505050565b6000828152606560205260408120610f8d908361232d565b609b8054604080516020601f60027fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff6101006001881615020190951694909404938401819004810282018101909252828152606093909290918301828280156107f95780601f106107ce576101008083540402835291602001916107f9565b600081565b600061081761103d6113aa565b846108b985604051806060016040528060258152602001612c3e60259139609860006110676113aa565b73ffffffffffffffffffffffffffffffffffffffff908116825260208083019390935260409182016000908120918d168152925290205491906116c7565b60006108176110b26113aa565b84846114f5565b600081815260656020526040812061081b9061234f565b8342111561113f57604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601b60248201527f45524332305065726d69742f45787069726564446561646c696e650000000000604482015290519081900360640190fd5b60007f6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c988888861116e8c61235a565b89604051602001808781526020018673ffffffffffffffffffffffffffffffffffffffff1681526020018573ffffffffffffffffffffffffffffffffffffffff168152602001848152602001838152602001828152602001965050505050505060405160208183030381529060405280519060200120905060006111f460fb5483612399565b90506000611204828787876123a5565b90508973ffffffffffffffffffffffffffffffffffffffff168173ffffffffffffffffffffffffffffffffffffffff16146112a057604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601c60248201527f45524332305065726d69742f496e76616c69645369676e617475726500000000604482015290519081900360640190fd5b6112ab8a8a8a6113ae565b50505050505050505050565b7f9f2df0fed2c77648de5860a4cc508cd0818c85b8b8a1ab4ceeef8d981c8956a681565b6000828152606560205260409020600201546112f9906108fb6113aa565b6109fd576040517f08c379a0000000000000000000000000000000000000000000000000000000008152600401808060200182810382526030815260200180612b2c6030913960400191505060405180910390fd5b73ffffffffffffffffffffffffffffffffffffffff918216600090815260986020908152604080832093909416825291909152205490565b7f65d7a28e3265b37a6474929f336521b332c1681b933f6cb9f3376673440d862a81565b3390565b73ffffffffffffffffffffffffffffffffffffffff831661141a576040517f08c379a0000000000000000000000000000000000000000000000000000000008152600401808060200182810382526024815260200180612c1a6024913960400191505060405180910390fd5b73ffffffffffffffffffffffffffffffffffffffff8216611486576040517f08c379a0000000000000000000000000000000000000000000000000000000008152600401808060200182810382526022815260200180612ac26022913960400191505060405180910390fd5b73ffffffffffffffffffffffffffffffffffffffff808416600081815260986020908152604080832094871680845294825291829020859055815185815291517f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b9259281900390910190a3505050565b73ffffffffffffffffffffffffffffffffffffffff8316611561576040517f08c379a0000000000000000000000000000000000000000000000000000000008152600401808060200182810382526025815260200180612bf56025913960400191505060405180910390fd5b73ffffffffffffffffffffffffffffffffffffffff82166115cd576040517f08c379a0000000000000000000000000000000000000000000000000000000008152600401808060200182810382526023815260200180612a4e6023913960400191505060405180910390fd5b6115d883838361259c565b61162281604051806060016040528060268152602001612ae46026913973ffffffffffffffffffffffffffffffffffffffff861660009081526097602052604090205491906116c7565b73ffffffffffffffffffffffffffffffffffffffff808516600090815260976020526040808220939093559084168152205461165e908261187e565b73ffffffffffffffffffffffffffffffffffffffff80841660008181526097602090815260409182902094909455805185815290519193928716927fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef92918290030190a3505050565b60008184841115611770576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825283818151815260200191508051906020019080838360005b8381101561173557818101518382015260200161171d565b50505050905090810190601f1680156117625780820380516001836020036101000a031916815260200191505b509250505060405180910390fd5b505050900390565b600082815260656020526040902061179090826125a7565b1561095f5761179d6113aa565b73ffffffffffffffffffffffffffffffffffffffff168173ffffffffffffffffffffffffffffffffffffffff16837f2f8788117e7eff1d82e926ec794901d17c78024a50270940304540a733656f0d60405160405180910390a45050565b600082815260656020526040902061181390826125c9565b1561095f576118206113aa565b73ffffffffffffffffffffffffffffffffffffffff168173ffffffffffffffffffffffffffffffffffffffff16837ff6391f5c32d9c69d2a47ea670b442974b53935d1edc7fd64eb21e047a839171b60405160405180910390a45050565b600082820183811015610f8d57604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601b60248201527f536166654d6174683a206164646974696f6e206f766572666c6f770000000000604482015290519081900360640190fd5b6118fa610e05565b61196557604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601460248201527f5061757361626c653a206e6f7420706175736564000000000000000000000000604482015290519081900360640190fd5b603380547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff001690557f5db9ee0a495bf2e6ff9c91a7834c1ba4fdd244a5e8aa4e537bd38aeae4b073aa6119b66113aa565b6040805173ffffffffffffffffffffffffffffffffffffffff9092168252519081900360200190a1565b73ffffffffffffffffffffffffffffffffffffffff8216611a6257604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601f60248201527f45524332303a206d696e7420746f20746865207a65726f206164647265737300604482015290519081900360640190fd5b611a6e6000838361259c565b609954611a7b908261187e565b60995573ffffffffffffffffffffffffffffffffffffffff8216600090815260976020526040902054611aae908261187e565b73ffffffffffffffffffffffffffffffffffffffff831660008181526097602090815260408083209490945583518581529351929391927fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9281900390910190a35050565b73ffffffffffffffffffffffffffffffffffffffff8216611b7f576040517f08c379a0000000000000000000000000000000000000000000000000000000008152600401808060200182810382526021815260200180612bd46021913960400191505060405180910390fd5b611b8b8260008361259c565b611bd581604051806060016040528060228152602001612aa06022913973ffffffffffffffffffffffffffffffffffffffff851660009081526097602052604090205491906116c7565b73ffffffffffffffffffffffffffffffffffffffff8316600090815260976020526040902055609954611c0890826125eb565b60995560408051828152905160009173ffffffffffffffffffffffffffffffffffffffff8516917fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9181900360200190a35050565b6000611c6830612662565b15905090565b600054610100900460ff1680611c875750611c87611c5d565b80611c95575060005460ff16155b611cea576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602e815260200180612b5c602e913960400191505060405180910390fd5b600054610100900460ff16158015611d5057600080547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff007fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00ff909116610100171660011790555b8015610bb557600080547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00ff16905550565b600054610100900460ff1680611d9a5750611d9a611c5d565b80611da8575060005460ff16155b611dfd576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602e815260200180612b5c602e913960400191505060405180910390fd5b600054610100900460ff16158015611e6357600080547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff007fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00ff909116610100171660011790555b8251611e7690609a90602086019061298a565b508151611e8a90609b90602085019061298a565b50609c80547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff001660121790558015610e0057600080547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00ff169055505050565b600054610100900460ff1680611f025750611f02611c5d565b80611f10575060005460ff16155b611f65576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602e815260200180612b5c602e913960400191505060405180910390fd5b600054610100900460ff16158015611fcb57600080547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff007fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00ff909116610100171660011790555b611fd58383612668565b60fb558015610e0057600080547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00ff169055505050565b600054610100900460ff16806120245750612024611c5d565b80612032575060005460ff16155b612087576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602e815260200180612b5c602e913960400191505060405180910390fd5b600054610100900460ff161580156120ed57600080547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff007fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00ff909116610100171660011790555b6121177f65d7a28e3265b37a6474929f336521b332c1681b933f6cb9f3376673440d862a83610955565b801561095f57600080547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00ff1690555050565b600054610100900460ff16806121625750612162611c5d565b80612170575060005460ff16155b6121c5576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602e815260200180612b5c602e913960400191505060405180910390fd5b600054610100900460ff1615801561222b57600080547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff007fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00ff909116610100171660011790555b6121177f9f2df0fed2c77648de5860a4cc508cd0818c85b8b8a1ab4ceeef8d981c8956a683610955565b5490565b612261610e05565b156122cd57604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601060248201527f5061757361626c653a2070617573656400000000000000000000000000000000604482015290519081900360640190fd5b603380547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff001660011790557f62e78cea01bee320cd4e420270b5ea74000d11b0c9f74754ebdbfc544b05a2586119b66113aa565b6000610f8d83836126a3565b6000610f8d8373ffffffffffffffffffffffffffffffffffffffff8416612721565b600061081b82612255565b73ffffffffffffffffffffffffffffffffffffffff8116600090815260fc6020526040812061238881612255565b915061239381612739565b50919050565b6000610f8d8383612742565b60007f7fffffffffffffffffffffffffffffff5d576e7357a4501ddfe92f46681b20a0821115612420576040517f08c379a0000000000000000000000000000000000000000000000000000000008152600401808060200182810382526022815260200180612b0a6022913960400191505060405180910390fd5b8360ff16601b148061243557508360ff16601c145b61248a576040517f08c379a0000000000000000000000000000000000000000000000000000000008152600401808060200182810382526022815260200180612b8a6022913960400191505060405180910390fd5b600060018686868660405160008152602001604052604051808581526020018460ff1681526020018381526020018281526020019450505050506020604051602081039080840390855afa1580156124e6573d6000803e3d6000fd5b50506040517fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe0015191505073ffffffffffffffffffffffffffffffffffffffff811661259357604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601860248201527f45434453413a20696e76616c6964207369676e61747572650000000000000000604482015290519081900360640190fd5b95945050505050565b610e00838383612798565b6000610f8d8373ffffffffffffffffffffffffffffffffffffffff8416612817565b6000610f8d8373ffffffffffffffffffffffffffffffffffffffff8416612861565b60008282111561265c57604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601e60248201527f536166654d6174683a207375627472616374696f6e206f766572666c6f770000604482015290519081900360640190fd5b50900390565b3b151590565b6000610f8d7f8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f84805190602001208480519060200120612945565b815460009082106126ff576040517f08c379a0000000000000000000000000000000000000000000000000000000008152600401808060200182810382526022815260200180612a2c6022913960400191505060405180910390fd5b82600001828154811061270e57fe5b9060005260206000200154905092915050565b60009081526001919091016020526040902054151590565b80546001019055565b604080517f19010000000000000000000000000000000000000000000000000000000000006020808301919091526022820194909452604280820193909352815180820390930183526062019052805191012090565b6127a3838383610e00565b6127ab610e05565b15610e0057604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601460248201527f45524332305061757361626c652f506175736564000000000000000000000000604482015290519081900360640190fd5b60006128238383612721565b6128595750815460018181018455600084815260208082209093018490558454848252828601909352604090209190915561081b565b50600061081b565b6000818152600183016020526040812054801561293b5783547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff80830191908101906000908790839081106128b257fe5b90600052602060002001549050808760000184815481106128cf57fe5b6000918252602080832090910192909255828152600189810190925260409020908401905586548790806128ff57fe5b6001900381819060005260206000200160009055905586600101600087815260200190815260200160002060009055600194505050505061081b565b600091505061081b565b604080516020808201959095528082019390935260608301919091524660808301523060a0808401919091528151808403909101815260c09092019052805191012090565b828054600181600116156101000203166002900490600052602060002090601f0160209004810192826129c05760008555612a06565b82601f106129d957805160ff1916838001178555612a06565b82800160010185558215612a06579182015b82811115612a065782518255916020019190600101906129eb565b50612a12929150612a16565b5090565b5b80821115612a125760008155600101612a1756fe456e756d657261626c655365743a20696e646578206f7574206f6620626f756e647345524332303a207472616e7366657220746f20746865207a65726f2061646472657373416363657373436f6e74726f6c3a2073656e646572206d75737420626520616e2061646d696e20746f206772616e7445524332303a206275726e20616d6f756e7420657863656564732062616c616e636545524332303a20617070726f766520746f20746865207a65726f206164647265737345524332303a207472616e7366657220616d6f756e7420657863656564732062616c616e636545434453413a20696e76616c6964207369676e6174757265202773272076616c7565416363657373436f6e74726f6c3a2073656e646572206d75737420626520616e2061646d696e20746f207265766f6b65496e697469616c697a61626c653a20636f6e747261637420697320616c726561647920696e697469616c697a656445434453413a20696e76616c6964207369676e6174757265202776272076616c756545524332303a207472616e7366657220616d6f756e74206578636565647320616c6c6f77616e636545524332303a206275726e2066726f6d20746865207a65726f206164647265737345524332303a207472616e736665722066726f6d20746865207a65726f206164647265737345524332303a20617070726f76652066726f6d20746865207a65726f206164647265737345524332303a2064656372656173656420616c6c6f77616e63652062656c6f77207a65726f416363657373436f6e74726f6c3a2063616e206f6e6c792072656e6f756e636520726f6c657320666f722073656c66a164736f6c6343000706000a