Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

import "../interfaces/tokens/IWSTETH.sol";
import "@openzeppelin/contracts/interfaces/IERC4626.sol";

contract Oracle {
    address public constant WstETH = 0x7f39C581F595B53c5cb19bD0b3f8dA6c935E2Ca0;
    address public immutable vault;
    bool public immutable isETHBased;

    constructor(address vault_, bool isETHBased_) {
        vault = vault_;
        if (isETHBased_) {
            require(IERC4626(vault).asset() == WstETH, "Oracle: vault asset is not WstETH");
        }
        isETHBased = isETHBased_;
    }

    function convertToAssets(uint256 shares) public view returns (uint256 assets) {
        assets = IERC4626(vault).convertToAssets(shares);
        if (isETHBased) {
            // we assume the price is in WSTETH token, so we want to convert it to ETH
            assets = IWSTETH(WstETH).getStETHByWstETH(assets);
        }
    }

    function getRate() external view returns (uint256) {
        return convertToAssets(1 ether);
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

import "./ISTETH.sol";

interface IWSTETH is IERC20 {
    function wrap(uint256 _stETHAmount) external returns (uint256);
    function unwrap(uint256 _wstETHAmount) external returns (uint256);

    function getWstETHByStETH(uint256 _stETHAmount) external view returns (uint256);
    function getStETHByWstETH(uint256 _wstETHAmount) external view returns (uint256);

    function stETH() external view returns (ISTETH);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";
import {IERC20Metadata} from "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface ISTETH is IERC20 {
    function submit(address _referral) external payable returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

{
  "remappings": [
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "@symbiotic/core/=lib/core/src/",
    "@symbiotic/core-test/=lib/core/test/",
    "@symbiotic/rewards/=lib/rewards/src/",
    "@eigenlayer-interfaces/=lib/eigenlayer-contracts/src/contracts/interfaces/",
    "@openzeppelin-upgrades-v4.9.0/=lib/eigenlayer-contracts/lib/openzeppelin-contracts-upgradeable-v4.9.0/",
    "@openzeppelin-upgrades/=lib/eigenlayer-contracts/lib/openzeppelin-contracts-upgradeable/",
    "@openzeppelin-v4.9.0/=lib/eigenlayer-contracts/lib/openzeppelin-contracts-v4.9.0/",
    "@symbioticfi/core/src/contracts/=lib/rewards/lib/core/src/contracts/",
    "@symbioticfi/core/src/interfaces/=lib/rewards/lib/core/src/interfaces/",
    "@symbioticfi/core/test/mocks/=lib/rewards/lib/core/test/mocks/",
    "core/=lib/core/",
    "ds-test/=lib/eigenlayer-contracts/lib/ds-test/src/",
    "eigenlayer-contracts/=lib/eigenlayer-contracts/",
    "erc4626-tests/=lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts-upgradeable-v4.9.0/=lib/eigenlayer-contracts/lib/openzeppelin-contracts-upgradeable-v4.9.0/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts-v4.9.0/=lib/eigenlayer-contracts/lib/openzeppelin-contracts-v4.9.0/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "openzeppelin/=lib/eigenlayer-contracts/lib/openzeppelin-contracts-v4.9.0/contracts/",
    "rewards/=lib/rewards/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "shanghai",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"vault_","type":"address"},{"internalType":"bool","name":"isETHBased_","type":"bool"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"WstETH","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"convertToAssets","outputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isETHBased","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"vault","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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

0000000000000000000000008c9532a60e0e7c6bbd2b2c1303f63ace1c3e98110000000000000000000000000000000000000000000000000000000000000000

-----Decoded View---------------
Arg [0] : vault_ (address): 0x8c9532a60E0E7C6BbD2B2c1303F63aCE1c3E9811
Arg [1] : isETHBased_ (bool): False

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 0000000000000000000000008c9532a60e0e7c6bbd2b2c1303f63ace1c3e9811
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000000