Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import { SafeCast } from "@openzeppelin/contracts/utils/SafeCast.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { SignedSafeMath } from "@openzeppelin/contracts/math/SignedSafeMath.sol";

import { IController } from "../../../interfaces/IController.sol";
import { ISetToken } from "../../../interfaces/ISetToken.sol";
import { ModuleBase } from "../../lib/ModuleBase.sol";
import { PreciseUnitMath } from "../../../lib/PreciseUnitMath.sol";


/**
 * @title StreamingFeeModule
 * @author Set Protocol
 *
 * Smart contract that accrues streaming fees for Set managers. Streaming fees are denominated as percent
 * per year and realized as Set inflation rewarded to the manager.
 */
contract StreamingFeeModule is ModuleBase, ReentrancyGuard {
    using SafeMath for uint256;
    using PreciseUnitMath for uint256;
    using SafeCast for uint256;

    using SignedSafeMath for int256;
    using PreciseUnitMath for int256;
    using SafeCast for int256;


    /* ============ Structs ============ */

    struct FeeState {
        address feeRecipient;                   // Address to accrue fees to
        uint256 maxStreamingFeePercentage;      // Max streaming fee maanager commits to using (1% = 1e16, 100% = 1e18)
        uint256 streamingFeePercentage;         // Percent of Set accruing to manager annually (1% = 1e16, 100% = 1e18)
        uint256 lastStreamingFeeTimestamp;      // Timestamp last streaming fee was accrued
    }

    /* ============ Events ============ */

    event FeeActualized(address indexed _setToken, uint256 _managerFee, uint256 _protocolFee);
    event StreamingFeeUpdated(address indexed _setToken, uint256 _newStreamingFee);
    event FeeRecipientUpdated(address indexed _setToken, address _newFeeRecipient);

    /* ============ Constants ============ */

    uint256 private constant ONE_YEAR_IN_SECONDS = 365.25 days;
    uint256 private constant PROTOCOL_STREAMING_FEE_INDEX = 0;

    /* ============ State Variables ============ */

    mapping(ISetToken => FeeState) public feeStates;

    /* ============ Constructor ============ */

    constructor(IController _controller) public ModuleBase(_controller) {}

    /* ============ External Functions ============ */

    /*
     * Calculates total inflation percentage then mints new Sets to the fee recipient. Position units are
     * then adjusted down (in magnitude) in order to ensure full collateralization. Callable by anyone.
     *
     * @param _setToken       Address of SetToken
     */
    function accrueFee(ISetToken _setToken) public nonReentrant onlyValidAndInitializedSet(_setToken) {
        uint256 managerFee;
        uint256 protocolFee;

        if (_streamingFeePercentage(_setToken) > 0) {
            uint256 inflationFeePercentage = _calculateStreamingFee(_setToken);

            // Calculate incentiveFee inflation
            uint256 feeQuantity = _calculateStreamingFeeInflation(_setToken, inflationFeePercentage);

            // Mint new Sets to manager and protocol
            (
                managerFee,
                protocolFee
            ) = _mintManagerAndProtocolFee(_setToken, feeQuantity);

            _editPositionMultiplier(_setToken, inflationFeePercentage);
        }

        feeStates[_setToken].lastStreamingFeeTimestamp = block.timestamp;

        emit FeeActualized(address(_setToken), managerFee, protocolFee);
    }

    /**
     * SET MANAGER ONLY. Initialize module with SetToken and set the fee state for the SetToken. Passed
     * _settings will have lastStreamingFeeTimestamp over-written.
     *
     * @param _setToken                 Address of SetToken
     * @param _settings                 FeeState struct defining fee parameters
     */
    function initialize(
        ISetToken _setToken,
        FeeState memory _settings
    )
        external
        onlySetManager(_setToken, msg.sender)
        onlyValidAndPendingSet(_setToken)
    {
        require(_settings.feeRecipient != address(0), "Fee Recipient must be non-zero address.");
        require(_settings.maxStreamingFeePercentage < PreciseUnitMath.preciseUnit(), "Max fee must be < 100%.");
        require(_settings.streamingFeePercentage <= _settings.maxStreamingFeePercentage, "Fee must be <= max.");

        _settings.lastStreamingFeeTimestamp = block.timestamp;

        feeStates[_setToken] = _settings;
        _setToken.initializeModule();
    }

    /**
     * Removes this module from the SetToken, via call by the SetToken. Manager's feeState is deleted. Fees
     * are not accrued in case reason for removing module is related to fee accrual.
     */
    function removeModule() external override {
        delete feeStates[ISetToken(msg.sender)];
    }

    /*
     * Set new streaming fee. Fees accrue at current rate then new rate is set.
     * Fees are accrued to prevent the manager from unfairly accruing a larger percentage.
     *
     * @param _setToken       Address of SetToken
     * @param _newFee         New streaming fee 18 decimal precision
     */
    function updateStreamingFee(
        ISetToken _setToken,
        uint256 _newFee
    )
        external
        onlySetManager(_setToken, msg.sender)
        onlyValidAndInitializedSet(_setToken)
    {
        require(_newFee < _maxStreamingFeePercentage(_setToken), "Fee must be less than max");
        accrueFee(_setToken);

        feeStates[_setToken].streamingFeePercentage = _newFee;

        emit StreamingFeeUpdated(address(_setToken), _newFee);
    }

    /*
     * Set new fee recipient.
     *
     * @param _setToken             Address of SetToken
     * @param _newFeeRecipient      New fee recipient
     */
    function updateFeeRecipient(ISetToken _setToken, address _newFeeRecipient)
        external
        onlySetManager(_setToken, msg.sender)
        onlyValidAndInitializedSet(_setToken)
    {
        require(_newFeeRecipient != address(0), "Fee Recipient must be non-zero address.");

        feeStates[_setToken].feeRecipient = _newFeeRecipient;

        emit FeeRecipientUpdated(address(_setToken), _newFeeRecipient);
    }

    /*
     * Calculates total inflation percentage in order to accrue fees to manager.
     *
     * @param _setToken       Address of SetToken
     * @return  uint256       Percent inflation of supply
     */
    function getFee(ISetToken _setToken) external view returns (uint256) {
        return _calculateStreamingFee(_setToken);
    }

    /* ============ Internal Functions ============ */

    /**
     * Calculates streaming fee by multiplying streamingFeePercentage by the elapsed amount of time since the last fee
     * was collected divided by one year in seconds, since the fee is a yearly fee.
     *
     * @param  _setToken          Address of Set to have feeState updated
     * @return uint256            Streaming fee denominated in percentage of totalSupply
     */
    function _calculateStreamingFee(ISetToken _setToken) internal view returns(uint256) {
        uint256 timeSinceLastFee = block.timestamp.sub(_lastStreamingFeeTimestamp(_setToken));

        // Streaming fee is streaming fee times years since last fee
        return timeSinceLastFee.mul(_streamingFeePercentage(_setToken)).div(ONE_YEAR_IN_SECONDS);
    }

    /**
     * Returns the new incentive fee denominated in the number of SetTokens to mint. The calculation for the fee involves
     * implying mint quantity so that the feeRecipient owns the fee percentage of the entire supply of the Set.
     *
     * The formula to solve for fee is:
     * (feeQuantity / feeQuantity) + totalSupply = fee / scaleFactor
     *
     * The simplified formula utilized below is:
     * feeQuantity = fee * totalSupply / (scaleFactor - fee)
     *
     * @param   _setToken               SetToken instance
     * @param   _feePercentage          Fee levied to feeRecipient
     * @return  uint256                 New RebalancingSet issue quantity
     */
    function _calculateStreamingFeeInflation(
        ISetToken _setToken,
        uint256 _feePercentage
    )
        internal
        view
        returns (uint256)
    {
        uint256 totalSupply = _setToken.totalSupply();

        // fee * totalSupply
        uint256 a = _feePercentage.mul(totalSupply);

        // ScaleFactor (10e18) - fee
        uint256 b = PreciseUnitMath.preciseUnit().sub(_feePercentage);

        return a.div(b);
    }

    /**
     * Mints sets to both the manager and the protocol. Protocol takes a percentage fee of the total amount of Sets
     * minted to manager.
     *
     * @param   _setToken               SetToken instance
     * @param   _feeQuantity            Amount of Sets to be minted as fees
     * @return  uint256                 Amount of Sets accrued to manager as fee
     * @return  uint256                 Amount of Sets accrued to protocol as fee
     */
    function _mintManagerAndProtocolFee(ISetToken _setToken, uint256 _feeQuantity) internal returns (uint256, uint256) {
        address protocolFeeRecipient = controller.feeRecipient();
        uint256 protocolFee = controller.getModuleFee(address(this), PROTOCOL_STREAMING_FEE_INDEX);

        uint256 protocolFeeAmount = _feeQuantity.preciseMul(protocolFee);
        uint256 managerFeeAmount = _feeQuantity.sub(protocolFeeAmount);

        _setToken.mint(_feeRecipient(_setToken), managerFeeAmount);

        if (protocolFeeAmount > 0) {
            _setToken.mint(protocolFeeRecipient, protocolFeeAmount);
        }

        return (managerFeeAmount, protocolFeeAmount);
    }

    /**
     * Calculates new position multiplier according to following formula:
     *
     * newMultiplier = oldMultiplier * (1-inflationFee)
     *
     * This reduces position sizes to offset increase in supply due to fee collection.
     *
     * @param   _setToken               SetToken instance
     * @param   _inflationFee           Fee inflation rate
     */
    function _editPositionMultiplier(ISetToken _setToken, uint256 _inflationFee) internal {
        int256 currentMultipler = _setToken.positionMultiplier();
        int256 newMultiplier = currentMultipler.preciseMul(PreciseUnitMath.preciseUnit().sub(_inflationFee).toInt256());

        _setToken.editPositionMultiplier(newMultiplier);
    }

    function _feeRecipient(ISetToken _set) internal view returns (address) {
        return feeStates[_set].feeRecipient;
    }

    function _lastStreamingFeeTimestamp(ISetToken _set) internal view returns (uint256) {
        return feeStates[_set].lastStreamingFeeTimestamp;
    }

    function _maxStreamingFeePercentage(ISetToken _set) internal view returns (uint256) {
        return feeStates[_set].maxStreamingFeePercentage;
    }

    function _streamingFeePercentage(ISetToken _set) internal view returns (uint256) {
        return feeStates[_set].streamingFeePercentage;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @title SignedSafeMath
 * @dev Signed math operations with safety checks that revert on error.
 */
library SignedSafeMath {
    int256 constant private _INT256_MIN = -2**255;

    /**
     * @dev Returns the multiplication of two signed integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(int256 a, int256 b) internal pure returns (int256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        require(!(a == -1 && b == _INT256_MIN), "SignedSafeMath: multiplication overflow");

        int256 c = a * b;
        require(c / a == b, "SignedSafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two signed integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(int256 a, int256 b) internal pure returns (int256) {
        require(b != 0, "SignedSafeMath: division by zero");
        require(!(b == -1 && a == _INT256_MIN), "SignedSafeMath: division overflow");

        int256 c = a / b;

        return c;
    }

    /**
     * @dev Returns the subtraction of two signed integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a - b;
        require((b >= 0 && c <= a) || (b < 0 && c > a), "SignedSafeMath: subtraction overflow");

        return c;
    }

    /**
     * @dev Returns the addition of two signed integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a + b;
        require((b >= 0 && c >= a) || (b < 0 && c < a), "SignedSafeMath: addition overflow");

        return c;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;


/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value < 2**128, "SafeCast: value doesn\'t fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value < 2**64, "SafeCast: value doesn\'t fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value < 2**32, "SafeCast: value doesn\'t fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value < 2**16, "SafeCast: value doesn\'t fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value < 2**8, "SafeCast: value doesn\'t fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= -2**127 && value < 2**127, "SafeCast: value doesn\'t fit in 128 bits");
        return int128(value);
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= -2**63 && value < 2**63, "SafeCast: value doesn\'t fit in 64 bits");
        return int64(value);
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= -2**31 && value < 2**31, "SafeCast: value doesn\'t fit in 32 bits");
        return int32(value);
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= -2**15 && value < 2**15, "SafeCast: value doesn\'t fit in 16 bits");
        return int16(value);
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= -2**7 && value < 2**7, "SafeCast: value doesn\'t fit in 8 bits");
        return int8(value);
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        require(value < 2**255, "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;

interface IController {
    function addSet(address _setToken) external;
    function feeRecipient() external view returns(address);
    function getModuleFee(address _module, uint256 _feeType) external view returns(uint256);
    function isModule(address _module) external view returns(bool);
    function isSet(address _setToken) external view returns(bool);
    function isSystemContract(address _contractAddress) external view returns (bool);
    function resourceId(uint256 _id) external view returns(address);
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;

interface IIntegrationRegistry {
    function addIntegration(address _module, string memory _id, address _wrapper) external;
    function getIntegrationAdapter(address _module, string memory _id) external view returns(address);
    function getIntegrationAdapterWithHash(address _module, bytes32 _id) external view returns(address);
    function isValidIntegration(address _module, string memory _id) external view returns(bool);
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;


/**
 * @title IModule
 * @author Set Protocol
 *
 * Interface for interacting with Modules.
 */
interface IModule {
    /**
     * Called by a SetToken to notify that this module was removed from the Set token. Any logic can be included
     * in case checks need to be made or state needs to be cleared.
     */
    function removeModule() external;
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;

/**
 * @title IPriceOracle
 * @author Set Protocol
 *
 * Interface for interacting with PriceOracle
 */
interface IPriceOracle {

    /* ============ Functions ============ */

    function getPrice(address _assetOne, address _assetTwo) external view returns (uint256);
    function masterQuoteAsset() external view returns (address);
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

/**
 * @title ISetToken
 * @author Set Protocol
 *
 * Interface for operating with SetTokens.
 */
interface ISetToken is IERC20 {

    /* ============ Enums ============ */

    enum ModuleState {
        NONE,
        PENDING,
        INITIALIZED
    }

    /* ============ Structs ============ */
    /**
     * The base definition of a SetToken Position
     *
     * @param component           Address of token in the Position
     * @param module              If not in default state, the address of associated module
     * @param unit                Each unit is the # of components per 10^18 of a SetToken
     * @param positionState       Position ENUM. Default is 0; External is 1
     * @param data                Arbitrary data
     */
    struct Position {
        address component;
        address module;
        int256 unit;
        uint8 positionState;
        bytes data;
    }

    /**
     * A struct that stores a component's cash position details and external positions
     * This data structure allows O(1) access to a component's cash position units and 
     * virtual units.
     *
     * @param virtualUnit               Virtual value of a component's DEFAULT position. Stored as virtual for efficiency
     *                                  updating all units at once via the position multiplier. Virtual units are achieved
     *                                  by dividing a "real" value by the "positionMultiplier"
     * @param componentIndex            
     * @param externalPositionModules   List of external modules attached to each external position. Each module
     *                                  maps to an external position
     * @param externalPositions         Mapping of module => ExternalPosition struct for a given component
     */
    struct ComponentPosition {
      int256 virtualUnit;
      address[] externalPositionModules;
      mapping(address => ExternalPosition) externalPositions;
    }

    /**
     * A struct that stores a component's external position details including virtual unit and any
     * auxiliary data.
     *
     * @param virtualUnit       Virtual value of a component's EXTERNAL position.
     * @param data              Arbitrary data
     */
    struct ExternalPosition {
      int256 virtualUnit;
      bytes data;
    }


    /* ============ Functions ============ */
    
    function addComponent(address _component) external;
    function removeComponent(address _component) external;
    function editDefaultPositionUnit(address _component, int256 _realUnit) external;
    function addExternalPositionModule(address _component, address _positionModule) external;
    function removeExternalPositionModule(address _component, address _positionModule) external;
    function editExternalPositionUnit(address _component, address _positionModule, int256 _realUnit) external;
    function editExternalPositionData(address _component, address _positionModule, bytes calldata _data) external;

    function invoke(address _target, uint256 _value, bytes calldata _data) external returns(bytes memory);

    function editPositionMultiplier(int256 _newMultiplier) external;

    function mint(address _account, uint256 _quantity) external;
    function burn(address _account, uint256 _quantity) external;

    function lock() external;
    function unlock() external;

    function addModule(address _module) external;
    function removeModule(address _module) external;
    function initializeModule() external;

    function setManager(address _manager) external;

    function manager() external view returns (address);
    function moduleStates(address _module) external view returns (ModuleState);
    function getModules() external view returns (address[] memory);
    
    function getDefaultPositionRealUnit(address _component) external view returns(int256);
    function getExternalPositionRealUnit(address _component, address _positionModule) external view returns(int256);
    function getComponents() external view returns(address[] memory);
    function getExternalPositionModules(address _component) external view returns(address[] memory);
    function getExternalPositionData(address _component, address _positionModule) external view returns(bytes memory);
    function isExternalPositionModule(address _component, address _module) external view returns(bool);
    function isComponent(address _component) external view returns(bool);
    
    function positionMultiplier() external view returns (int256);
    function getPositions() external view returns (Position[] memory);
    function getTotalComponentRealUnits(address _component) external view returns(int256);

    function isInitializedModule(address _module) external view returns(bool);
    function isPendingModule(address _module) external view returns(bool);
    function isLocked() external view returns (bool);
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;

import { ISetToken } from "../interfaces/ISetToken.sol";

interface ISetValuer {
    function calculateSetTokenValuation(ISetToken _setToken, address _quoteAsset) external view returns (uint256);
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0

*/

pragma solidity 0.6.10;

/**
 * @title AddressArrayUtils
 * @author Set Protocol
 *
 * Utility functions to handle Address Arrays
 *
 * CHANGELOG:
 * - 4/21/21: Added validatePairsWithArray methods
 */
library AddressArrayUtils {

    /**
     * Finds the index of the first occurrence of the given element.
     * @param A The input array to search
     * @param a The value to find
     * @return Returns (index and isIn) for the first occurrence starting from index 0
     */
    function indexOf(address[] memory A, address a) internal pure returns (uint256, bool) {
        uint256 length = A.length;
        for (uint256 i = 0; i < length; i++) {
            if (A[i] == a) {
                return (i, true);
            }
        }
        return (uint256(-1), false);
    }

    /**
    * Returns true if the value is present in the list. Uses indexOf internally.
    * @param A The input array to search
    * @param a The value to find
    * @return Returns isIn for the first occurrence starting from index 0
    */
    function contains(address[] memory A, address a) internal pure returns (bool) {
        (, bool isIn) = indexOf(A, a);
        return isIn;
    }

    /**
    * Returns true if there are 2 elements that are the same in an array
    * @param A The input array to search
    * @return Returns boolean for the first occurrence of a duplicate
    */
    function hasDuplicate(address[] memory A) internal pure returns(bool) {
        require(A.length > 0, "A is empty");

        for (uint256 i = 0; i < A.length - 1; i++) {
            address current = A[i];
            for (uint256 j = i + 1; j < A.length; j++) {
                if (current == A[j]) {
                    return true;
                }
            }
        }
        return false;
    }

    /**
     * @param A The input array to search
     * @param a The address to remove
     * @return Returns the array with the object removed.
     */
    function remove(address[] memory A, address a)
        internal
        pure
        returns (address[] memory)
    {
        (uint256 index, bool isIn) = indexOf(A, a);
        if (!isIn) {
            revert("Address not in array.");
        } else {
            (address[] memory _A,) = pop(A, index);
            return _A;
        }
    }

    /**
     * @param A The input array to search
     * @param a The address to remove
     */
    function removeStorage(address[] storage A, address a)
        internal
    {
        (uint256 index, bool isIn) = indexOf(A, a);
        if (!isIn) {
            revert("Address not in array.");
        } else {
            uint256 lastIndex = A.length - 1; // If the array would be empty, the previous line would throw, so no underflow here
            if (index != lastIndex) { A[index] = A[lastIndex]; }
            A.pop();
        }
    }

    /**
    * Removes specified index from array
    * @param A The input array to search
    * @param index The index to remove
    * @return Returns the new array and the removed entry
    */
    function pop(address[] memory A, uint256 index)
        internal
        pure
        returns (address[] memory, address)
    {
        uint256 length = A.length;
        require(index < A.length, "Index must be < A length");
        address[] memory newAddresses = new address[](length - 1);
        for (uint256 i = 0; i < index; i++) {
            newAddresses[i] = A[i];
        }
        for (uint256 j = index + 1; j < length; j++) {
            newAddresses[j - 1] = A[j];
        }
        return (newAddresses, A[index]);
    }

    /**
     * Returns the combination of the two arrays
     * @param A The first array
     * @param B The second array
     * @return Returns A extended by B
     */
    function extend(address[] memory A, address[] memory B) internal pure returns (address[] memory) {
        uint256 aLength = A.length;
        uint256 bLength = B.length;
        address[] memory newAddresses = new address[](aLength + bLength);
        for (uint256 i = 0; i < aLength; i++) {
            newAddresses[i] = A[i];
        }
        for (uint256 j = 0; j < bLength; j++) {
            newAddresses[aLength + j] = B[j];
        }
        return newAddresses;
    }

    /**
     * Validate that address and uint array lengths match. Validate address array is not empty
     * and contains no duplicate elements.
     *
     * @param A         Array of addresses
     * @param B         Array of uint
     */
    function validatePairsWithArray(address[] memory A, uint[] memory B) internal pure {
        require(A.length == B.length, "Array length mismatch");
        _validateLengthAndUniqueness(A);
    }

    /**
     * Validate that address and bool array lengths match. Validate address array is not empty
     * and contains no duplicate elements.
     *
     * @param A         Array of addresses
     * @param B         Array of bool
     */
    function validatePairsWithArray(address[] memory A, bool[] memory B) internal pure {
        require(A.length == B.length, "Array length mismatch");
        _validateLengthAndUniqueness(A);
    }

    /**
     * Validate that address and string array lengths match. Validate address array is not empty
     * and contains no duplicate elements.
     *
     * @param A         Array of addresses
     * @param B         Array of strings
     */
    function validatePairsWithArray(address[] memory A, string[] memory B) internal pure {
        require(A.length == B.length, "Array length mismatch");
        _validateLengthAndUniqueness(A);
    }

    /**
     * Validate that address array lengths match, and calling address array are not empty
     * and contain no duplicate elements.
     *
     * @param A         Array of addresses
     * @param B         Array of addresses
     */
    function validatePairsWithArray(address[] memory A, address[] memory B) internal pure {
        require(A.length == B.length, "Array length mismatch");
        _validateLengthAndUniqueness(A);
    }

    /**
     * Validate that address and bytes array lengths match. Validate address array is not empty
     * and contains no duplicate elements.
     *
     * @param A         Array of addresses
     * @param B         Array of bytes
     */
    function validatePairsWithArray(address[] memory A, bytes[] memory B) internal pure {
        require(A.length == B.length, "Array length mismatch");
        _validateLengthAndUniqueness(A);
    }

    /**
     * Validate address array is not empty and contains no duplicate elements.
     *
     * @param A          Array of addresses
     */
    function _validateLengthAndUniqueness(address[] memory A) internal pure {
        require(A.length > 0, "Array length must be > 0");
        require(!hasDuplicate(A), "Cannot duplicate addresses");
    }
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

/**
 * @title ExplicitERC20
 * @author Set Protocol
 *
 * Utility functions for ERC20 transfers that require the explicit amount to be transferred.
 */
library ExplicitERC20 {
    using SafeMath for uint256;

    /**
     * When given allowance, transfers a token from the "_from" to the "_to" of quantity "_quantity".
     * Ensures that the recipient has received the correct quantity (ie no fees taken on transfer)
     *
     * @param _token           ERC20 token to approve
     * @param _from            The account to transfer tokens from
     * @param _to              The account to transfer tokens to
     * @param _quantity        The quantity to transfer
     */
    function transferFrom(
        IERC20 _token,
        address _from,
        address _to,
        uint256 _quantity
    )
        internal
    {
        // Call specified ERC20 contract to transfer tokens (via proxy).
        if (_quantity > 0) {
            uint256 existingBalance = _token.balanceOf(_to);

            SafeERC20.safeTransferFrom(
                _token,
                _from,
                _to,
                _quantity
            );

            uint256 newBalance = _token.balanceOf(_to);

            // Verify transfer quantity is reflected in balance
            require(
                newBalance == existingBalance.add(_quantity),
                "Invalid post transfer balance"
            );
        }
    }
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { SafeCast } from "@openzeppelin/contracts/utils/SafeCast.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { SignedSafeMath } from "@openzeppelin/contracts/math/SignedSafeMath.sol";


/**
 * @title PreciseUnitMath
 * @author Set Protocol
 *
 * Arithmetic for fixed-point numbers with 18 decimals of precision. Some functions taken from
 * dYdX's BaseMath library.
 *
 * CHANGELOG:
 * - 9/21/20: Added safePower function
 * - 4/21/21: Added approximatelyEquals function
 * - 12/13/21: Added preciseDivCeil (int overloads) function
 * - 12/13/21: Added abs function
 */
library PreciseUnitMath {
    using SafeMath for uint256;
    using SignedSafeMath for int256;
    using SafeCast for int256;

    // The number One in precise units.
    uint256 constant internal PRECISE_UNIT = 10 ** 18;
    int256 constant internal PRECISE_UNIT_INT = 10 ** 18;

    // Max unsigned integer value
    uint256 constant internal MAX_UINT_256 = type(uint256).max;
    // Max and min signed integer value
    int256 constant internal MAX_INT_256 = type(int256).max;
    int256 constant internal MIN_INT_256 = type(int256).min;

    /**
     * @dev Getter function since constants can't be read directly from libraries.
     */
    function preciseUnit() internal pure returns (uint256) {
        return PRECISE_UNIT;
    }

    /**
     * @dev Getter function since constants can't be read directly from libraries.
     */
    function preciseUnitInt() internal pure returns (int256) {
        return PRECISE_UNIT_INT;
    }

    /**
     * @dev Getter function since constants can't be read directly from libraries.
     */
    function maxUint256() internal pure returns (uint256) {
        return MAX_UINT_256;
    }

    /**
     * @dev Getter function since constants can't be read directly from libraries.
     */
    function maxInt256() internal pure returns (int256) {
        return MAX_INT_256;
    }

    /**
     * @dev Getter function since constants can't be read directly from libraries.
     */
    function minInt256() internal pure returns (int256) {
        return MIN_INT_256;
    }

    /**
     * @dev Multiplies value a by value b (result is rounded down). It's assumed that the value b is the significand
     * of a number with 18 decimals precision.
     */
    function preciseMul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a.mul(b).div(PRECISE_UNIT);
    }

    /**
     * @dev Multiplies value a by value b (result is rounded towards zero). It's assumed that the value b is the
     * significand of a number with 18 decimals precision.
     */
    function preciseMul(int256 a, int256 b) internal pure returns (int256) {
        return a.mul(b).div(PRECISE_UNIT_INT);
    }

    /**
     * @dev Multiplies value a by value b (result is rounded up). It's assumed that the value b is the significand
     * of a number with 18 decimals precision.
     */
    function preciseMulCeil(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0 || b == 0) {
            return 0;
        }
        return a.mul(b).sub(1).div(PRECISE_UNIT).add(1);
    }

    /**
     * @dev Divides value a by value b (result is rounded down).
     */
    function preciseDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        return a.mul(PRECISE_UNIT).div(b);
    }


    /**
     * @dev Divides value a by value b (result is rounded towards 0).
     */
    function preciseDiv(int256 a, int256 b) internal pure returns (int256) {
        return a.mul(PRECISE_UNIT_INT).div(b);
    }

    /**
     * @dev Divides value a by value b (result is rounded up or away from 0).
     */
    function preciseDivCeil(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "Cant divide by 0");

        return a > 0 ? a.mul(PRECISE_UNIT).sub(1).div(b).add(1) : 0;
    }

    /**
     * @dev Divides value a by value b (result is rounded up or away from 0). When `a` is 0, 0 is
     * returned. When `b` is 0, method reverts with divide-by-zero error.
     */
    function preciseDivCeil(int256 a, int256 b) internal pure returns (int256) {
        require(b != 0, "Cant divide by 0");
        
        a = a.mul(PRECISE_UNIT_INT);
        int256 c = a.div(b);

        if (a % b != 0) {
            // a ^ b == 0 case is covered by the previous if statement, hence it won't resolve to --c
            (a ^ b > 0) ? ++c : --c;
        }

        return c;
    }

    /**
     * @dev Divides value a by value b (result is rounded down - positive numbers toward 0 and negative away from 0).
     */
    function divDown(int256 a, int256 b) internal pure returns (int256) {
        require(b != 0, "Cant divide by 0");
        require(a != MIN_INT_256 || b != -1, "Invalid input");

        int256 result = a.div(b);
        if (a ^ b < 0 && a % b != 0) {
            result -= 1;
        }

        return result;
    }

    /**
     * @dev Multiplies value a by value b where rounding is towards the lesser number.
     * (positive values are rounded towards zero and negative values are rounded away from 0).
     */
    function conservativePreciseMul(int256 a, int256 b) internal pure returns (int256) {
        return divDown(a.mul(b), PRECISE_UNIT_INT);
    }

    /**
     * @dev Divides value a by value b where rounding is towards the lesser number.
     * (positive values are rounded towards zero and negative values are rounded away from 0).
     */
    function conservativePreciseDiv(int256 a, int256 b) internal pure returns (int256) {
        return divDown(a.mul(PRECISE_UNIT_INT), b);
    }

    /**
    * @dev Performs the power on a specified value, reverts on overflow.
    */
    function safePower(
        uint256 a,
        uint256 pow
    )
        internal
        pure
        returns (uint256)
    {
        require(a > 0, "Value must be positive");

        uint256 result = 1;
        for (uint256 i = 0; i < pow; i++){
            uint256 previousResult = result;

            // Using safemath multiplication prevents overflows
            result = previousResult.mul(a);
        }

        return result;
    }

    /**
     * @dev Returns true if a =~ b within range, false otherwise.
     */
    function approximatelyEquals(uint256 a, uint256 b, uint256 range) internal pure returns (bool) {
        return a <= b.add(range) && a >= b.sub(range);
    }

    /**
     * Returns the absolute value of int256 `a` as a uint256
     */
    function abs(int256 a) internal pure returns (uint) {
        return a >= 0 ? a.toUint256() : a.mul(-1).toUint256();
    }

    /**
     * Returns the negation of a
     */
    function neg(int256 a) internal pure returns (int256) {
        require(a > MIN_INT_256, "Inversion overflow");
        return -a;
    }
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

import { ISetToken } from "../../interfaces/ISetToken.sol";


/**
 * @title Invoke
 * @author Set Protocol
 *
 * A collection of common utility functions for interacting with the SetToken's invoke function
 */
library Invoke {
    using SafeMath for uint256;

    /* ============ Internal ============ */

    /**
     * Instructs the SetToken to set approvals of the ERC20 token to a spender.
     *
     * @param _setToken        SetToken instance to invoke
     * @param _token           ERC20 token to approve
     * @param _spender         The account allowed to spend the SetToken's balance
     * @param _quantity        The quantity of allowance to allow
     */
    function invokeApprove(
        ISetToken _setToken,
        address _token,
        address _spender,
        uint256 _quantity
    )
        internal
    {
        bytes memory callData = abi.encodeWithSignature("approve(address,uint256)", _spender, _quantity);
        _setToken.invoke(_token, 0, callData);
    }

    /**
     * Instructs the SetToken to transfer the ERC20 token to a recipient.
     *
     * @param _setToken        SetToken instance to invoke
     * @param _token           ERC20 token to transfer
     * @param _to              The recipient account
     * @param _quantity        The quantity to transfer
     */
    function invokeTransfer(
        ISetToken _setToken,
        address _token,
        address _to,
        uint256 _quantity
    )
        internal
    {
        if (_quantity > 0) {
            bytes memory callData = abi.encodeWithSignature("transfer(address,uint256)", _to, _quantity);
            _setToken.invoke(_token, 0, callData);
        }
    }

    /**
     * Instructs the SetToken to transfer the ERC20 token to a recipient.
     * The new SetToken balance must equal the existing balance less the quantity transferred
     *
     * @param _setToken        SetToken instance to invoke
     * @param _token           ERC20 token to transfer
     * @param _to              The recipient account
     * @param _quantity        The quantity to transfer
     */
    function strictInvokeTransfer(
        ISetToken _setToken,
        address _token,
        address _to,
        uint256 _quantity
    )
        internal
    {
        if (_quantity > 0) {
            // Retrieve current balance of token for the SetToken
            uint256 existingBalance = IERC20(_token).balanceOf(address(_setToken));

            Invoke.invokeTransfer(_setToken, _token, _to, _quantity);

            // Get new balance of transferred token for SetToken
            uint256 newBalance = IERC20(_token).balanceOf(address(_setToken));

            // Verify only the transfer quantity is subtracted
            require(
                newBalance == existingBalance.sub(_quantity),
                "Invalid post transfer balance"
            );
        }
    }

    /**
     * Instructs the SetToken to unwrap the passed quantity of WETH
     *
     * @param _setToken        SetToken instance to invoke
     * @param _weth            WETH address
     * @param _quantity        The quantity to unwrap
     */
    function invokeUnwrapWETH(ISetToken _setToken, address _weth, uint256 _quantity) internal {
        bytes memory callData = abi.encodeWithSignature("withdraw(uint256)", _quantity);
        _setToken.invoke(_weth, 0, callData);
    }

    /**
     * Instructs the SetToken to wrap the passed quantity of ETH
     *
     * @param _setToken        SetToken instance to invoke
     * @param _weth            WETH address
     * @param _quantity        The quantity to unwrap
     */
    function invokeWrapWETH(ISetToken _setToken, address _weth, uint256 _quantity) internal {
        bytes memory callData = abi.encodeWithSignature("deposit()");
        _setToken.invoke(_weth, _quantity, callData);
    }
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

import { AddressArrayUtils } from "../../lib/AddressArrayUtils.sol";
import { ExplicitERC20 } from "../../lib/ExplicitERC20.sol";
import { IController } from "../../interfaces/IController.sol";
import { IModule } from "../../interfaces/IModule.sol";
import { ISetToken } from "../../interfaces/ISetToken.sol";
import { Invoke } from "./Invoke.sol";
import { Position } from "./Position.sol";
import { PreciseUnitMath } from "../../lib/PreciseUnitMath.sol";
import { ResourceIdentifier } from "./ResourceIdentifier.sol";
import { SafeCast } from "@openzeppelin/contracts/utils/SafeCast.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { SignedSafeMath } from "@openzeppelin/contracts/math/SignedSafeMath.sol";

/**
 * @title ModuleBase
 * @author Set Protocol
 *
 * Abstract class that houses common Module-related state and functions.
 *
 * CHANGELOG:
 * - 4/21/21: Delegated modifier logic to internal helpers to reduce contract size
 *
 */
abstract contract ModuleBase is IModule {
    using AddressArrayUtils for address[];
    using Invoke for ISetToken;
    using Position for ISetToken;
    using PreciseUnitMath for uint256;
    using ResourceIdentifier for IController;
    using SafeCast for int256;
    using SafeCast for uint256;
    using SafeMath for uint256;
    using SignedSafeMath for int256;

    /* ============ State Variables ============ */

    // Address of the controller
    IController public controller;

    /* ============ Modifiers ============ */

    modifier onlyManagerAndValidSet(ISetToken _setToken) {
        _validateOnlyManagerAndValidSet(_setToken);
        _;
    }

    modifier onlySetManager(ISetToken _setToken, address _caller) {
        _validateOnlySetManager(_setToken, _caller);
        _;
    }

    modifier onlyValidAndInitializedSet(ISetToken _setToken) {
        _validateOnlyValidAndInitializedSet(_setToken);
        _;
    }

    /**
     * Throws if the sender is not a SetToken's module or module not enabled
     */
    modifier onlyModule(ISetToken _setToken) {
        _validateOnlyModule(_setToken);
        _;
    }

    /**
     * Utilized during module initializations to check that the module is in pending state
     * and that the SetToken is valid
     */
    modifier onlyValidAndPendingSet(ISetToken _setToken) {
        _validateOnlyValidAndPendingSet(_setToken);
        _;
    }

    /* ============ Constructor ============ */

    /**
     * Set state variables and map asset pairs to their oracles
     *
     * @param _controller             Address of controller contract
     */
    constructor(IController _controller) public {
        controller = _controller;
    }

    /* ============ Internal Functions ============ */

    /**
     * Transfers tokens from an address (that has set allowance on the module).
     *
     * @param  _token          The address of the ERC20 token
     * @param  _from           The address to transfer from
     * @param  _to             The address to transfer to
     * @param  _quantity       The number of tokens to transfer
     */
    function transferFrom(IERC20 _token, address _from, address _to, uint256 _quantity) internal {
        ExplicitERC20.transferFrom(_token, _from, _to, _quantity);
    }

    /**
     * Gets the integration for the module with the passed in name. Validates that the address is not empty
     */
    function getAndValidateAdapter(string memory _integrationName) internal view returns(address) { 
        bytes32 integrationHash = getNameHash(_integrationName);
        return getAndValidateAdapterWithHash(integrationHash);
    }

    /**
     * Gets the integration for the module with the passed in hash. Validates that the address is not empty
     */
    function getAndValidateAdapterWithHash(bytes32 _integrationHash) internal view returns(address) { 
        address adapter = controller.getIntegrationRegistry().getIntegrationAdapterWithHash(
            address(this),
            _integrationHash
        );

        require(adapter != address(0), "Must be valid adapter"); 
        return adapter;
    }

    /**
     * Gets the total fee for this module of the passed in index (fee % * quantity)
     */
    function getModuleFee(uint256 _feeIndex, uint256 _quantity) internal view returns(uint256) {
        uint256 feePercentage = controller.getModuleFee(address(this), _feeIndex);
        return _quantity.preciseMul(feePercentage);
    }

    /**
     * Pays the _feeQuantity from the _setToken denominated in _token to the protocol fee recipient
     */
    function payProtocolFeeFromSetToken(ISetToken _setToken, address _token, uint256 _feeQuantity) internal {
        if (_feeQuantity > 0) {
            _setToken.strictInvokeTransfer(_token, controller.feeRecipient(), _feeQuantity); 
        }
    }

    /**
     * Returns true if the module is in process of initialization on the SetToken
     */
    function isSetPendingInitialization(ISetToken _setToken) internal view returns(bool) {
        return _setToken.isPendingModule(address(this));
    }

    /**
     * Returns true if the address is the SetToken's manager
     */
    function isSetManager(ISetToken _setToken, address _toCheck) internal view returns(bool) {
        return _setToken.manager() == _toCheck;
    }

    /**
     * Returns true if SetToken must be enabled on the controller 
     * and module is registered on the SetToken
     */
    function isSetValidAndInitialized(ISetToken _setToken) internal view returns(bool) {
        return controller.isSet(address(_setToken)) &&
            _setToken.isInitializedModule(address(this));
    }

    /**
     * Hashes the string and returns a bytes32 value
     */
    function getNameHash(string memory _name) internal pure returns(bytes32) {
        return keccak256(bytes(_name));
    }

    /* ============== Modifier Helpers ===============
     * Internal functions used to reduce bytecode size
     */

    /**
     * Caller must SetToken manager and SetToken must be valid and initialized
     */
    function _validateOnlyManagerAndValidSet(ISetToken _setToken) internal view {
       require(isSetManager(_setToken, msg.sender), "Must be the SetToken manager");
       require(isSetValidAndInitialized(_setToken), "Must be a valid and initialized SetToken");
    }

    /**
     * Caller must SetToken manager
     */
    function _validateOnlySetManager(ISetToken _setToken, address _caller) internal view {
        require(isSetManager(_setToken, _caller), "Must be the SetToken manager");
    }

    /**
     * SetToken must be valid and initialized
     */
    function _validateOnlyValidAndInitializedSet(ISetToken _setToken) internal view {
        require(isSetValidAndInitialized(_setToken), "Must be a valid and initialized SetToken");
    }

    /**
     * Caller must be initialized module and module must be enabled on the controller
     */
    function _validateOnlyModule(ISetToken _setToken) internal view {
        require(
            _setToken.moduleStates(msg.sender) == ISetToken.ModuleState.INITIALIZED,
            "Only the module can call"
        );

        require(
            controller.isModule(msg.sender),
            "Module must be enabled on controller"
        );
    }

    /**
     * SetToken must be in a pending state and module must be in pending state
     */
    function _validateOnlyValidAndPendingSet(ISetToken _setToken) internal view {
        require(controller.isSet(address(_setToken)), "Must be controller-enabled SetToken");
        require(isSetPendingInitialization(_setToken), "Must be pending initialization");
    }
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeCast } from "@openzeppelin/contracts/utils/SafeCast.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { SignedSafeMath } from "@openzeppelin/contracts/math/SignedSafeMath.sol";

import { ISetToken } from "../../interfaces/ISetToken.sol";
import { PreciseUnitMath } from "../../lib/PreciseUnitMath.sol";


/**
 * @title Position
 * @author Set Protocol
 *
 * Collection of helper functions for handling and updating SetToken Positions
 *
 * CHANGELOG:
 *  - Updated editExternalPosition to work when no external position is associated with module
 */
library Position {
    using SafeCast for uint256;
    using SafeMath for uint256;
    using SafeCast for int256;
    using SignedSafeMath for int256;
    using PreciseUnitMath for uint256;

    /* ============ Helper ============ */

    /**
     * Returns whether the SetToken has a default position for a given component (if the real unit is > 0)
     */
    function hasDefaultPosition(ISetToken _setToken, address _component) internal view returns(bool) {
        return _setToken.getDefaultPositionRealUnit(_component) > 0;
    }

    /**
     * Returns whether the SetToken has an external position for a given component (if # of position modules is > 0)
     */
    function hasExternalPosition(ISetToken _setToken, address _component) internal view returns(bool) {
        return _setToken.getExternalPositionModules(_component).length > 0;
    }
    
    /**
     * Returns whether the SetToken component default position real unit is greater than or equal to units passed in.
     */
    function hasSufficientDefaultUnits(ISetToken _setToken, address _component, uint256 _unit) internal view returns(bool) {
        return _setToken.getDefaultPositionRealUnit(_component) >= _unit.toInt256();
    }

    /**
     * Returns whether the SetToken component external position is greater than or equal to the real units passed in.
     */
    function hasSufficientExternalUnits(
        ISetToken _setToken,
        address _component,
        address _positionModule,
        uint256 _unit
    )
        internal
        view
        returns(bool)
    {
       return _setToken.getExternalPositionRealUnit(_component, _positionModule) >= _unit.toInt256();    
    }

    /**
     * If the position does not exist, create a new Position and add to the SetToken. If it already exists,
     * then set the position units. If the new units is 0, remove the position. Handles adding/removing of 
     * components where needed (in light of potential external positions).
     *
     * @param _setToken           Address of SetToken being modified
     * @param _component          Address of the component
     * @param _newUnit            Quantity of Position units - must be >= 0
     */
    function editDefaultPosition(ISetToken _setToken, address _component, uint256 _newUnit) internal {
        bool isPositionFound = hasDefaultPosition(_setToken, _component);
        if (!isPositionFound && _newUnit > 0) {
            // If there is no Default Position and no External Modules, then component does not exist
            if (!hasExternalPosition(_setToken, _component)) {
                _setToken.addComponent(_component);
            }
        } else if (isPositionFound && _newUnit == 0) {
            // If there is a Default Position and no external positions, remove the component
            if (!hasExternalPosition(_setToken, _component)) {
                _setToken.removeComponent(_component);
            }
        }

        _setToken.editDefaultPositionUnit(_component, _newUnit.toInt256());
    }

    /**
     * Update an external position and remove and external positions or components if necessary. The logic flows as follows:
     * 1) If component is not already added then add component and external position. 
     * 2) If component is added but no existing external position using the passed module exists then add the external position.
     * 3) If the existing position is being added to then just update the unit and data
     * 4) If the position is being closed and no other external positions or default positions are associated with the component
     *    then untrack the component and remove external position.
     * 5) If the position is being closed and other existing positions still exist for the component then just remove the
     *    external position.
     *
     * @param _setToken         SetToken being updated
     * @param _component        Component position being updated
     * @param _module           Module external position is associated with
     * @param _newUnit          Position units of new external position
     * @param _data             Arbitrary data associated with the position
     */
    function editExternalPosition(
        ISetToken _setToken,
        address _component,
        address _module,
        int256 _newUnit,
        bytes memory _data
    )
        internal
    {
        if (_newUnit != 0) {
            if (!_setToken.isComponent(_component)) {
                _setToken.addComponent(_component);
                _setToken.addExternalPositionModule(_component, _module);
            } else if (!_setToken.isExternalPositionModule(_component, _module)) {
                _setToken.addExternalPositionModule(_component, _module);
            }
            _setToken.editExternalPositionUnit(_component, _module, _newUnit);
            _setToken.editExternalPositionData(_component, _module, _data);
        } else {
            require(_data.length == 0, "Passed data must be null");
            // If no default or external position remaining then remove component from components array
            if (_setToken.getExternalPositionRealUnit(_component, _module) != 0) {
                address[] memory positionModules = _setToken.getExternalPositionModules(_component);
                if (_setToken.getDefaultPositionRealUnit(_component) == 0 && positionModules.length == 1) {
                    require(positionModules[0] == _module, "External positions must be 0 to remove component");
                    _setToken.removeComponent(_component);
                }
                _setToken.removeExternalPositionModule(_component, _module);
            }
        }
    }

    /**
     * Get total notional amount of Default position
     *
     * @param _setTokenSupply     Supply of SetToken in precise units (10^18)
     * @param _positionUnit       Quantity of Position units
     *
     * @return                    Total notional amount of units
     */
    function getDefaultTotalNotional(uint256 _setTokenSupply, uint256 _positionUnit) internal pure returns (uint256) {
        return _setTokenSupply.preciseMul(_positionUnit);
    }

    /**
     * Get position unit from total notional amount
     *
     * @param _setTokenSupply     Supply of SetToken in precise units (10^18)
     * @param _totalNotional      Total notional amount of component prior to
     * @return                    Default position unit
     */
    function getDefaultPositionUnit(uint256 _setTokenSupply, uint256 _totalNotional) internal pure returns (uint256) {
        return _totalNotional.preciseDiv(_setTokenSupply);
    }

    /**
     * Get the total tracked balance - total supply * position unit
     *
     * @param _setToken           Address of the SetToken
     * @param _component          Address of the component
     * @return                    Notional tracked balance
     */
    function getDefaultTrackedBalance(ISetToken _setToken, address _component) internal view returns(uint256) {
        int256 positionUnit = _setToken.getDefaultPositionRealUnit(_component); 
        return _setToken.totalSupply().preciseMul(positionUnit.toUint256());
    }

    /**
     * Calculates the new default position unit and performs the edit with the new unit
     *
     * @param _setToken                 Address of the SetToken
     * @param _component                Address of the component
     * @param _setTotalSupply           Current SetToken supply
     * @param _componentPreviousBalance Pre-action component balance
     * @return                          Current component balance
     * @return                          Previous position unit
     * @return                          New position unit
     */
    function calculateAndEditDefaultPosition(
        ISetToken _setToken,
        address _component,
        uint256 _setTotalSupply,
        uint256 _componentPreviousBalance
    )
        internal
        returns(uint256, uint256, uint256)
    {
        uint256 currentBalance = IERC20(_component).balanceOf(address(_setToken));
        uint256 positionUnit = _setToken.getDefaultPositionRealUnit(_component).toUint256();

        uint256 newTokenUnit;
        if (currentBalance > 0) {
            newTokenUnit = calculateDefaultEditPositionUnit(
                _setTotalSupply,
                _componentPreviousBalance,
                currentBalance,
                positionUnit
            );
        } else {
            newTokenUnit = 0;
        }

        editDefaultPosition(_setToken, _component, newTokenUnit);

        return (currentBalance, positionUnit, newTokenUnit);
    }

    /**
     * Calculate the new position unit given total notional values pre and post executing an action that changes SetToken state
     * The intention is to make updates to the units without accidentally picking up airdropped assets as well.
     *
     * @param _setTokenSupply     Supply of SetToken in precise units (10^18)
     * @param _preTotalNotional   Total notional amount of component prior to executing action
     * @param _postTotalNotional  Total notional amount of component after the executing action
     * @param _prePositionUnit    Position unit of SetToken prior to executing action
     * @return                    New position unit
     */
    function calculateDefaultEditPositionUnit(
        uint256 _setTokenSupply,
        uint256 _preTotalNotional,
        uint256 _postTotalNotional,
        uint256 _prePositionUnit
    )
        internal
        pure
        returns (uint256)
    {
        // If pre action total notional amount is greater then subtract post action total notional and calculate new position units
        uint256 airdroppedAmount = _preTotalNotional.sub(_prePositionUnit.preciseMul(_setTokenSupply));
        return _postTotalNotional.sub(airdroppedAmount).preciseDiv(_setTokenSupply);
    }
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import { IController } from "../../interfaces/IController.sol";
import { IIntegrationRegistry } from "../../interfaces/IIntegrationRegistry.sol";
import { IPriceOracle } from "../../interfaces/IPriceOracle.sol";
import { ISetValuer } from "../../interfaces/ISetValuer.sol";

/**
 * @title ResourceIdentifier
 * @author Set Protocol
 *
 * A collection of utility functions to fetch information related to Resource contracts in the system
 */
library ResourceIdentifier {

    // IntegrationRegistry will always be resource ID 0 in the system
    uint256 constant internal INTEGRATION_REGISTRY_RESOURCE_ID = 0;
    // PriceOracle will always be resource ID 1 in the system
    uint256 constant internal PRICE_ORACLE_RESOURCE_ID = 1;
    // SetValuer resource will always be resource ID 2 in the system
    uint256 constant internal SET_VALUER_RESOURCE_ID = 2;

    /* ============ Internal ============ */

    /**
     * Gets the instance of integration registry stored on Controller. Note: IntegrationRegistry is stored as index 0 on
     * the Controller
     */
    function getIntegrationRegistry(IController _controller) internal view returns (IIntegrationRegistry) {
        return IIntegrationRegistry(_controller.resourceId(INTEGRATION_REGISTRY_RESOURCE_ID));
    }

    /**
     * Gets instance of price oracle on Controller. Note: PriceOracle is stored as index 1 on the Controller
     */
    function getPriceOracle(IController _controller) internal view returns (IPriceOracle) {
        return IPriceOracle(_controller.resourceId(PRICE_ORACLE_RESOURCE_ID));
    }

    /**
     * Gets the instance of Set valuer on Controller. Note: SetValuer is stored as index 2 on the Controller
     */
    function getSetValuer(IController _controller) internal view returns (ISetValuer) {
        return ISetValuer(_controller.resourceId(SET_VALUER_RESOURCE_ID));
    }
}

{
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [],
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IController","name":"_controller","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"_setToken","type":"address"},{"indexed":false,"internalType":"uint256","name":"_managerFee","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_protocolFee","type":"uint256"}],"name":"FeeActualized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"_setToken","type":"address"},{"indexed":false,"internalType":"address","name":"_newFeeRecipient","type":"address"}],"name":"FeeRecipientUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"_setToken","type":"address"},{"indexed":false,"internalType":"uint256","name":"_newStreamingFee","type":"uint256"}],"name":"StreamingFeeUpdated","type":"event"},{"inputs":[{"internalType":"contract ISetToken","name":"_setToken","type":"address"}],"name":"accrueFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"controller","outputs":[{"internalType":"contract IController","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ISetToken","name":"","type":"address"}],"name":"feeStates","outputs":[{"internalType":"address","name":"feeRecipient","type":"address"},{"internalType":"uint256","name":"maxStreamingFeePercentage","type":"uint256"},{"internalType":"uint256","name":"streamingFeePercentage","type":"uint256"},{"internalType":"uint256","name":"lastStreamingFeeTimestamp","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ISetToken","name":"_setToken","type":"address"}],"name":"getFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ISetToken","name":"_setToken","type":"address"},{"components":[{"internalType":"address","name":"feeRecipient","type":"address"},{"internalType":"uint256","name":"maxStreamingFeePercentage","type":"uint256"},{"internalType":"uint256","name":"streamingFeePercentage","type":"uint256"},{"internalType":"uint256","name":"lastStreamingFeeTimestamp","type":"uint256"}],"internalType":"struct StreamingFeeModule.FeeState","name":"_settings","type":"tuple"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"removeModule","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ISetToken","name":"_setToken","type":"address"},{"internalType":"address","name":"_newFeeRecipient","type":"address"}],"name":"updateFeeRecipient","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ISetToken","name":"_setToken","type":"address"},{"internalType":"uint256","name":"_newFee","type":"uint256"}],"name":"updateStreamingFee","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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